• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.217-217
• /
• 2003

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.94-94
• /
• 2008

• 해양환경안전학회지
• /
• 제14권1호
• /
• pp.9-14
• /
• 2008

나노입자란 직경 100nm 이하의 크기를 가진 입자로 가전, 기능성 화장품, 반도체, 항균제 및 광촉매제 등에 널리 사용되어 있어 본 연구는 9종류의 나노입자가 참굴 수정란에 미치는 영향을 살펴보았다. 나인입자를 첨가하지 않은 대조구에서는 인공 수정한 참굴 수정란의 78%가 D형 유생으로 발생하였다. 은(Ag)이 2% 함유된 AGZ020, Nano silver 및 P-25의 나노입자와 주석산화물인 SnO의 나노입자는 24시간 경과 후 0.05ppm 농도에서 각 각 22%, 52%, 58% 및 76%가 D형 유생으로 발생하였으나, 20ppm 농도에서 8시간 이내 참굴 수정란을 모두 파괴하였다. In, Sb, Sn, Zn 및 Ag-$TiO_2$의 나노입자는 24시간 경과 후 0.05ppm 농도에서 모두 70%이상의 D형 유생으로 발생하여 상대적으로 낮은 농도에서 큰 영향을 받지 않는 것으로 나타났으나, 20ppm 농도에서 대조에 비해 D형 유생 발생율이 각 각 57%, 60%, 50%, 65% 및 64%로 저해되었다.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1222-1228
• /
• 2010

고속 PMIC를 위한 빠른 천이 응답 시간을 가지는 CMOS LDO 레귤레이터를 설계하였다. 제안하는 LDO 레귤레이터 회로는 기준전압회로와 오류증폭회로, 파워 트랜지스터 등으로 이루어지며, 출력전압의 안정성을 높이기 위하여 오류증폭 회로와 파워 트랜지스터 사이에 버퍼로써 2단 광대역 OTA를 추가하였다. 기존의 연구에서 제안된 가장 간단하게 구현할 수 있는 버퍼로는 소스팔로워 구조가 있으나, 출력 스윙이 좁고 신호 대 잡음비가 저하되는 문제점이 있었다. 본 논문에서는 2단 광대역 OTA를 버퍼로 사용하여 LDO 전압 레귤레이터의 출력 특성을 개선하였다. $0.5{\mu}m$ CMOS 공정을 이용하여 모의실험 한 결과, 라인 레귤레이션은 16 mV/V, 부하 레귤레이션 0.007 %/mA를 얻었다.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.68-74
• /
• 2018

Cobalt-incorporated zeolitic imidazolate framework ZIF-8 was synthesized by a simple one-pot synthesis method at room temperature. Powder X-ray diffraction patterns and energy dispersive X-ray spectrum confirmed the formation of the bimetallic Co/Zn-ZIF structure. UV-Vis diffuse reflectance spectra revealed that the bimetallic ZIF had a lower HOMO-LUMO gap compared with ZIF-8 due to the charge transfer process from organic ligands to cobalt centers. A hydrolytic stability test showed that Co/Zn-ZIF is very robust in aqueous solution - the most important criterion for any material to be applied in photodegradation. The photocatalytic efficiency of the synthesized samples was investigated over the Indigo Carmine (IC) dye degradation under solar simulated irradiation. Cobalt incorporated ZIF-8 exhibited high efficiency over a wide range of pH and initial concentration. The degradation followed through three distinct stages: a slow initial stage, followed by an accelerated stage and completed with a decelerated stage. Moreover, the photocatalytic performance of the synthesized samples was highly improved in alkaline environment rather than in acidic or neutral environments, which may have been because in high pH medium, the increased concentration of hydroxyl ion facilitated the formation of hydroxyl radicals, a reactive species responsible for the breaking of the Indigo Carmine structure. Thus, Co/Zn-ZIF is a promising and green material for solving the environmental pollution caused by textile industries.

• 한국표면공학회지
• /
• 제41권4호
• /
• pp.147-155
• /
• 2008

The dental orthodontic wire provides a good combination of strength, corrosion resistance and moderate cost. The purpose of this study was to investigate the effects of TiN and ZrN coating on corrosion resistance and physical property of orthodontic wire using various instruments. Wires(round type and rectangular type) were used, respectively, for experiment. Ion plating was carried out for wire using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen was observed with field emission scanning electron microscopy(FE-SEM), energy dispersive X-ray spectroscopy(EDS), atomic force microscopy(AFM), vickers hardness tester, and electrochemical tester. The surface of TiN and ZrN coated wire was more smooth than that of other kinds of non-coated wire. TiN and ZrN coated surface showed higher hardness than that of non-coated surface. The corrosion potential of the TiN coated wire was comparatively high. The current density of TiN coated wire was smaller than that of non-coated wire in 0.9% NaCl solution. Pit nucleated at scratch of wire. The pitting corrosion resistance $|E_{pit}-E_{rep}|$ increased in the order of ZrN coated(300 mV), TiN coated(120 mV) and non-coated wire(0 mV).

• 한국표면공학회지
• /
• 제41권2호
• /
• pp.69-75
• /
• 2008

Electrochemical behaviors of surface modified and MC3T3-E1 cell cultured Ti-30Ta alloys have been investigated using various electrochemical methods. The Ti alloys containing Ta were melted by using a vacuum furnace and then homogenized for 6 hrs at $1000^{\circ}C$. MC3T3-E1 cell culture was performed with MC3T3-E1 mouse osteoblasts for 2 days. The microstructures and corrosion resistance were measured using FE-SEM, XRD, EIS and potentiodynamic test in artificial saliva solution at $36.5{\pm}1^{\circ}C$. Ti-Ta alloy showed the martensite structure of ${\alpha}+{\beta}$ phase and micro-structure was changed from lamellar structure to needle-like structure as Ta content increased. Corrosion resistance increased as Ta content increased. Corrosion resistance of cell cultured Ti-Ta alloy increased predominantly in compared with non cell cultured Ti- Ta alloy due to inhibition of the dissolution of metal ion by covered cell. $R_p$ value of MC3T3-E1 cell cultured Ti-40 Ta alloy showed $1.60{\times}10^6{\Omega}cm^2$ which was higher than those of other Ti alloy. Polarization resistance of cell-cultured Ti-Ta alloy increased in compared with non-cell cultured Ti alloy.

• 한국표면공학회지
• /
• 제41권2호
• /
• pp.57-62
• /
• 2008

Electrochemical properties of Ti-30Ta-$(3{\sim}15)$Nb alloys coated by HA/Ti compound layer have been studied by various electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10, and 15 wt% Nb contents were manufactured by the vacuum furnace system. The specimens were homogenized for 24 hrs at $1000^{\circ}C$. The samples were cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The HA/Ti non-coated and coated morphology of Ti alloy were analyzed by x-ray diffractometer(XRD) and filed emission scanning electron microscope(FE-SEM). The corrosion behaviors were investigated using potentiodynamic method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The homoginazed Ti-30Ta-$(3{\sim}15wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and ${\beta}$ phase peak was predominantly appeared with increasing Nb content. The microstructure of Ti alloy was transformed from needle-like structure to equiaxed structure as Nb content increased. HA/Ti composite surface showed uniform coating layer with 750 nm thickness. The corrosion resistance of HA/Ti composite coated Ti-alloys were higher than those of the non-coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.51-58
• /
• 2008

This paper presents a new design of the precision stage for the reticle in lithography process and a low hunting control method for the stage. The stage has three axes for X, Y, ${\theta}_z$ those actuated by three voice coil motors individually. The designed reticle stage system has three gap sensors and voice coil motors, and supported by four air bearings and the forward/inverse kinematics of the stage were solved to get an accurate reference position. When a stage is in regulating control mode, there always exist small fluctuations(stage hunting) in the stage movement. Because the low stage hunting characteristic is very important in recent lithography and nano-level applications, a special regulating controller for ultra low hunting is proposed in this paper. Also this research proposed the 2-step transmission system for preventing the noise infection from environmental devices. The experimental results showed the proposed regulating control system reduced hunting noise as 35nm(rms) when a conventional PID generates 77nm(rms) in the same mechanical system. Besides the reticle stage has 100nm linear accuracy and $1{\mu}rad$ rotation accuracy at the control frequency of 8kHz.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.180-187
• /
• 2004

The miniaturization technologies are perceived as potential key technologies of the future. They will bring about completely different ways in which people and machines interact with the physical world. However, at the present time, the primary technologies used fur miniaturization are dependent on the microelectronic fabrication techniques. The principal shortcomings associated with such techniques are related to the inability of to produce arbitrary three-dimensional features not only in electronics but also in a wide range of metallic materials. In this paper, a ultramicro-stereolithography system assisted with a femto-second laser was developed to fabricate the arbitrary three-dimensional nano/micro-scaled features. In the developed process, a femto-second laser is projected according to CAD data on a photosensitive monomer resin, it induces polymerization of the liquid resin. After the polymerization, a droplet of ethanol is dropped to remove the liquid resin and then the polymerized nano-scaled features only remain. By a newly developed process, miniature devices for an extremely wide range of applications would become a technologically feasible reality. Some of nano/micro-scaled features as examples were fabricated to prove the usefulness of this study at the fundamental stage.