Browse > Article

Design of the Low Hunting Controller for the Reticle Stage for Lithography  

Kim, Mun-Su (서울산업대 산업대학원 메카트로닉스공학과)
Oh, Min-Taek (서울산업대 산업대학원 메카트로닉스공학과)
Kim, Jung-Han (서울산업대학교 기계설계자동화공학부 정밀기계기술연구소)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.17, no.4, 2008 , pp. 51-58 More about this Journal
Abstract
This paper presents a new design of the precision stage for the reticle in lithography process and a low hunting control method for the stage. The stage has three axes for X, Y, ${\theta}_z$ those actuated by three voice coil motors individually. The designed reticle stage system has three gap sensors and voice coil motors, and supported by four air bearings and the forward/inverse kinematics of the stage were solved to get an accurate reference position. When a stage is in regulating control mode, there always exist small fluctuations(stage hunting) in the stage movement. Because the low stage hunting characteristic is very important in recent lithography and nano-level applications, a special regulating controller for ultra low hunting is proposed in this paper. Also this research proposed the 2-step transmission system for preventing the noise infection from environmental devices. The experimental results showed the proposed regulating control system reduced hunting noise as 35nm(rms) when a conventional PID generates 77nm(rms) in the same mechanical system. Besides the reticle stage has 100nm linear accuracy and $1{\mu}rad$ rotation accuracy at the control frequency of 8kHz.
Keywords
Reticle stage; precision stage; lithographer; gap sensor; voice coil motor;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Liu, Y. T., Fung, R. F., and Wang, C. C., 2005, "Precision position control using combined piezo-VCM actuators," Precision Engineering, Vol. 29, pp. 411-422   DOI   ScienceOn
2 Kim, W. J, Verma, S., and Shakir, H., 2007, "Design and precision construction of novel magneticlevitation- based multi-axis nanoscale positioning systems," Precision Engineering, Vol. 31, pp. 337-350   DOI   ScienceOn
3 Kim, J. H., 2005, Precision Displacement Control of VCM with Compensator for Non-linearity of Force According to Position, Master's thesis, Pusan Nation University, Republic of Korea
4 Mardiguian, M., 2000, EMI Troubleshooting Techniques, McGraw-Hill, New York, pp. 29-90
5 Shinno, H., Yoshioka, H., and Taniguchi, K., 2007, "A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining," Annals of the CIRP, Vol. 56, pp. 369-372   DOI   ScienceOn
6 Gao, W., Dejima, S., Yanai, H., Katakura, K., Kiyono, S., and Tomita, Y., 2004, "A surface motor-driven planar motion stage integrated with an XY surface encoder for precision positioning," Precision Engineering, Vol. 28, pp. 329-337   DOI   ScienceOn
7 Sriyotha, P., Nakamoto, K., Sugai, M., and Yamazaki, K., 2006, "Development of 5-Axis Linear Motor Driven Super-Precision Machine," Annals of the CIRP, Vol. 55, pp.381-384   DOI   ScienceOn
8 Oh, H. S., Lee, S. J., Choi, S. C., Park, J. W., and Lee, D. W., 2007, "Behavioral Characteristics of Nano-Stages According to Hinge Structure," Journal of the KSMTE, Vol. 16, No. 3, pp. 23-30   과학기술학회마을
9 Kim, W. J. and Trumper, D. L., 1998, "High precision magnetic levitation stage for photolithography," Precision Engineering, Vol. 22, No. 2, pp. 66-77   DOI   ScienceOn
10 Chen, K. S., Trumper, D. L., and Smith, S. T., 2002, "Design and Control for an electro - magnetically driven X-Y-stage," Precision Engineering, Vol. 26, pp. 355-369   DOI   ScienceOn
11 Lee, K.W., Lee, M. G., Lee, J.W., Lim, S. H., Shin, D. H., Jang, S. Y., Jeong, J. I., and Yim, H. J., 2007, "Dynamic Analysis of a Nano Imprinting Stage Using CAE," Journal of the KSMTE, Vol. 16, No. 5, pp. 211-217   과학기술학회마을