• 한국정밀공학회지
• /
• 제28권11호
• /
• pp.1251-1258
• /
• 2011

With the help of nanoscale materials like carbon nanotube (CNT), there is the potential to develop new actuators that will provide higher work per cycle than previous actuator technologies, and generate much higher mechanical strength. In this study, the electrochemical actuation characteristics of nano carbon materials were experimentally studied to develop electrochemical actuators. The electrochemical actuators were composed of aqueous NaCl electrolyte and their actuating electrodes were made of multi-walled carbon nanotube (MWCNT)/polystyrene composite and graphene respectably. Actuation is proportional to charging transfer rate, and the electrolysis with an AC voltage input has very complex characteristics. To quantify the actuation property, the strain responses and output model were studied based on electrochemical effects between the nano carbon films and the electrolyte.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.416-423
• /
• 2012

This paper introduces an effect of a preparing $ZrO_2$-Ag composite on its mechanical properties and microstructure. In present study, $ZrO_2$-Ag was prepared by reduction-deposition route and wetting dispersive milling method, respectively. Two type of Ag powders (nano Ag and micron Ag size, respectively) were dispersed into $ZrO_2$ powder during wetting dispersive milling in D.I. water. Each sample was sintered at $1450^{\circ}C$ for 2hr in atmosphere, and then several mechanical tests and analysis of microstructure were carried out by bending test, hardness, fracture toughness and fracture surface microstructure. As for microstructure, the Ag coated $ZrO_2$ showed homogeneously dispersed Ag in $ZrO_2$ in where pore defect did not appear. However, $ZrO_2$-nano Ag and $ZrO_2$-micro Ag composite appeared Ag aggregation and its pore defect, which carried out low mechanical property and wide error function value.

• Advances in nano research
• /
• 제5권2호
• /
• pp.99-111
• /
• 2017

Nano particles have been gaining increasing attention and applied in many fields to fabricate new materials with novel functions due to their unique physical and chemical properties. In the present study two nano materials, namely nano silica (NS) and nano clay metakaolin (NMK) were partially replaced with ordinary Portland cement (OPC). The replacement level was varied from 0.5 to 2.0% in OPC and blended in cement mortar with a water cement ratio of 0.40. Mechanical property studies and durability experiments such as compressive strength, tensile strength, water absorption, depth of chloride penetration test. Nano silica was synthesized from rice husk ash and analyze the size using particle size analyzer. The results indicate that the compressive and tensile strength of the cement mortars containing nano materials were higher strength compared to the plain mortar with the same water cement ratio.

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.517-521
• /
• 2012

탄소나노튜브는 유연 전도체로서 투명전극, 유연 히터, 투명 스피커 분야에 활발히 응용되고 있다. 본 연구에서는 PET 유연 모재의 전면적에 다중벽 탄소나노튜브(MWCNT)를 도포하는 스프레이법 이용하여, 투명하고 전도성 있는 MWCNT/PET 복합 박막을 제조하였다. 분산제로 사용된 SDS (sodium dodecyl sulfate)의 농도를 조절함으로써 MWCNT 의 분산도를 조절하였으며, 분산도가 조절된 시험편의 인장실험을 통해 기계적인 변형 하에서 MWCNT/PET 전도성 박막의 전기-기계적인 거동과 분산제의 효과를 평가하였다.

• 한국진공학회지
• /
• 제22권4호
• /
• pp.188-192
• /
• 2013

반도체 소자의 소형화, 고집적화로 박막의 다층화 및 선폭 감소로 인한 실리콘 웨이퍼와 금속 박막 사이의 확산을 방지하기 위한 많은 연구가 이루어지고 있다. 본 연구는 tungsten (W)을 주 물질로 증착시 nitrogen (N)의 유량을 2.5~10 sccm으로 변화시키며 증착된 확산방지막의 nano-mechanics 특성에 대해 연구하였다. 증착률, 비저항 및 결정학적 특성을 ${\beta}$-ray backscattering spectroscopy, 4-point probe, X-ray diffraction (XRD)을 이용하여 측정한 후 Nano-indenter를 사용하여 nano-mechanics 특성을 조사하였다. 그 결과 질소 가스 유량이 5 sccm 포함된 박막에서 표면 경도(surface hardness)는 10.07 에서 15.55 GPa로 급격하게 증가하였다. 이후 질소가스의 유량이 7.5 및 10 sccm에서는 표면 경도가 각각 12.65와 12.77 GPa로 질소 가스 유량이 5 sccm인 박막보다 표면경도가 상대적으로 감소하였다. 이는 박막 내 결정질과 비정질의 W과 N의 결합 비율의 차이에 의한 영향으로 생각되며, 또한 압축응력에 기인한 스트레스 증가가 원인으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.895-901
• /
• 2012

In order to application for high voltage heavy electric equipments, epoxy/microsilica 60 wt%/nano layered silicate composites (EMNC_60) and epoxy/microsilica 65 wt%/nano layered silicate composites (EMNC_65) respectively was synthesized by our electric field dispersion method and the result was obtained completely dispersion state. Thermal properties such as glass transition temperature (Tg) and thermal expansion coefficient, and DMA characteristics were studied, and mechanical properties such as tensile and flexural tests were performed. AC electrical insulation strength was also tested. The study on thermal property, EMNC_65 was better than EMNC_60 and mechanical, electrical properties much improved EMNC_60 compared with EMNC_65.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.167-173
• /
• 2005

The Berkovich nano-indentation is an indentation test method analyzing mechanical properties of materials such as hardness and elastic modulus. The length scale of the penetration is measured in nanometers. Therefore, this method becomes widely useful for analyzing the mechanical property of thin film which can not be measured before. In this paper, comparing two results of the load-displacement curve obtained by the Berkovich nano-indentation and the 3-D finite element analysis, it was confirmed that the 3-D finite element analysis is useful. The phenomenon of pile-up and sink-in due to material properties was discussed by the finite element analysis.

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.418-430
• /
• 2012

본 논문은 재료의 표면검사와 음향특성 측정이 가능한 마이크로/나노 비파괴평가 기술을 소개한다. 이들 기술로 초음파원자현미경과 초음파현미경의 원리와 특징 그리고 응용분야에 대해서 기술하였다. 특히, 이들 기술은 표면과 표면직하의 이미지 관찰 외에도 음향특성을 측정하여 마이크로/나노 구조물 혹은 표면에서의 기계적인 물성평가가 가능한 기술이다. 따라서 기존 비파괴분야와 함께 첨단 산업분야에 있어 마이크로/나노 비파괴평가의 적용과 기술 개발이 향후 폭넓게 가능할 것으로 판단된다.

• Tribology and Lubricants
• /
• 제24권4호
• /
• pp.190-195
• /
• 2008

Many researchers have tried to improve the tribological characteristics of lubricant by adding various nano particles in the base lubricant. But the reliability evaluation of the lubricants are rarely performed in its real operation condition. In this study, the physical property and the tribological characteristics of the graphite nano lubricant were evaluated and compared with raw lubricant after thermal degrading. In order to evaluate the tirbological characteristics, the disk-on-disk tribotester was adopted to measure the friction coefficient of the graphite nano lubricants. Also the temperature variations of friction surfaces were measured by the thermocouple installed on the fixed plate in the test chamber of the tribotester. The kinematic viscosity was measured using a capillary viscometer on the temperatures of 40, 60 and $80^{\circ}C$. The results showed that the graphite nano lubricant had lower friction coefficient and less wear on the friction surfaces than raw lubricant. After thermally degrading, the friction coefficients of graphite nano lubricant increased, but the friction coefficients after thermal degradation were still maintained lower than those of raw lubricant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.940-944
• /
• 2003

With the increasing demand for plastic micro components, micro-/nano-molding using the mother stamper has received much attention. If the replication temperature is too high, the adhesion between the stamper and the polymer melt may deteriorate the surface quality of the replicated part, excessively wearing down the stamper. In this paper, an experimental method analyzes the temperature dependency of the anti-adhesion property between the actual stamper with patterns of sub-micrometer and the polymer melt. As a practical example, a correlation between the contact angle of the stamper and the surface quality of the molded substrates as a function of the replication temperature, respectively, was obtained quantitatively.