• 한국추진공학회지
• /
• 제20권2호
• /
• pp.18-23
• /
• 2016

유기 분자의 자기조립 다분자막은 기질의 표면에서 전자기적인 상호작용을 통해 자발적으로 형성된다. 본 연구에서는 이 기술을 응용하여 고에너지물질의 안전성과 취급용이성이 향상됨을 입증하였다. 최근 다양한 연구에서 고에너지물질 결정 내부의 결함은 물질의 안전성을 저하시키는 요인이므로, 결정 입자의 크기를 감소시키는 연구가 중요시되고 있다. 이에 따라, 결정화 방법을 통해 제조된 나노 수준의 고에너지물질을 사용하였으며, 자기조립 다분자막 기술을 응용하여 물질의 안전성을 향상시켰다. 입도/표면전하/마찰감도/정전기 전하 등을 측정하여 표면개질 여부를 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.24.2-24.2
• /
• 2009

Nanostuctures such as nanodot and nanowire have been extensively studied as building blocks for nanoscale devices. However, the direct growth of the nanostuctures at the desired position is one of the most important requirements for realization of the practical devices with high integrity. Self-assembled nanotemplate is one of viable methods to produce highly-ordered nanostructures because it exhibits the highly ordered nanometer-sized pattern without resorting to lithography techniques. And selective epitaxial growth (SEG) can be a proper method for nanostructure fabrication because selective growth on the patterned openings obtained from nanotemplate can be a proper direction to achieve high level of control and reproducibility of nanostructucture fabrication. Especially, SiGe has led to the development of semiconductor devices in which the band structure is varied by the composition and strain distribution, and nanostructures of SiGe has represented new class of devices such nanowire metal-oxide-semiconductor field-effect transistors and photovoltaics. So, in this study, various shaped SiGe nanostructures were selectively grown on Si substrate through ultrahigh vacuum chemical vapor deposition (UHV-CVD) of SiGe on the hexagonally arranged Si openings obtained using nanotemplates. We adopted two types of nanotemplates in this study; anodic aluminum oxide (AAO) and diblock copolymer of PS-b-PMMA. Well ordered and various shaped nanostructure of SiGe, nanodots and nanowire, were fabricated on Si openings by combining SEG of SiGe to self-assembled nanotemplates. Nanostructure fabrication method adopted in this study will open up the easy way to produce the integrated nanoelectronic device arrays using the well ordered nano-building blocks obtained from the combination of SEG and self-assembled nanotemplates.

• 전기화학회지
• /
• 제16권3호
• /
• pp.157-161
• /
• 2013

다공성 $LiMn_{0.6}Fe_{0.4}PO_4$ (LMFP)를 졸-겔법을 이용하여 합성하였고, 원료물질을 양론비로 혼합한 후 혼합물을 $600^{\circ}C$에서 10시간 동안 가열하여 입자 표면 전체에 전도성 탄소물질이 균일하게 형성된 LMFP을 제조하였다. LMFP의 결정구조는 리트펠트법에 의해 조사하였고, 표면구조와 기공특성은 주사전자현미경, 투과전자현미경, BET로 분석하였다. 제조된 LMFP는 표면적이 크고, 입자 표면에는 웹(web) 형태의 다공성 탄소층이 균일하게 형성되어 있는 것을 확인하였다. 상온에서 LMFP를 양극으로 사용하여 0.1 C의 전류밀도에서 초기방전용량은 152 mAh/g, 에너지밀도는 570 Wh/kg로 높았고 사이클 성능도 장기적으로 안정적이었다. 졸-겔법에 의해 제조된 LMFP는 높은 기공도와 균일한 탄소코팅에 의한 시너지효과로 이온확산이 용이하여 우수한 전기화학적 특성을 나타내었다.

• Environmental Analysis Health and Toxicology
• /
• 제26권
• /
• pp.3.1-3.6
• /
• 2011

Objectives: Titanium dioxide ($TiO_2$), a common nanoparticle widely used in industrial production, is one of nano-sized materials. The purpose of this study was to determine the acute and chronic toxicity of $TiO_2$ using different size and various concentrations on Daphnia magna. Methods: In the acute toxicity test, four concentrations (0, 0.5, 4, and 8 mM) for $TiO_2$ with 250 or 500 nm and five concentrations (0, 0.25, 0.5, 0.75, and 1 mM) for $TiO_2$ with 21 nm were selected to analyze the toxic effect to three groups of ten daphnia neonates over 96 hours. In addition, to better understand their toxicity, chronic toxicity was examined over 21 days using 0, 1, and 10 mM for each type of $TiO_2$. Results: Our results showed that all organisms died before the reproduction time at a concentration of 10 mM of $TiO_2$. In addition, the exposure of anatase (21 nm) particles were more toxic to D. magna, comparing with that of anatase (250 nm) and rutile (500 nm) particles. Conclusions: This study indicated that $TiO_2$ had adverse impacts on the survival, growth and reproduction of D. magna after the 21days exposure. In addition, the number of test organisms that were able to reproduce neonates gradually were reduced as the size of $TiO_2$ tested was decreased.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.255-259
• /
• 2014

In this research, we compared the COD removal efficiencies of titanium dioxide ($TiO_2$) thin films coated on the surfaces of borosilicate glass that prepared by three different numbers of coating layer; i) 3 layers ii) 4 layers and iii) 5 layers by sol-gel method. All of the prepared $TiO_2$ thin films consisted of pure anatase crystalline structure with grain sizes in the range 20-250 nm. The calculated optical band gaps of the $TiO_2$ thin films were 3.24. The total apparent surface area per total weight of $TiO_2$ thin films were 4.74, 3.86 and $2.79m^2g^{-1}$ for 3, 4 and 5 layers coating, respectively. The kinetics of the photodegradation reactions of COD under UVA light source were described by the Langmuir-Hinshelwood (L-H) kinetic model. The specific rates of the photodegradation of $TiO_2$ thin films at 3 layers coating was $1.40{\times}10^{-4}min^{-1}mW^{-1}$, while for the 4 layers coating and the 5 layers coating were $1.50{\times}10^{-4}$ and $4.60{\times}10^{-4}min^{-1}mW^{-1}$, respectively. The photocatalytic performance of COD degradation was higher with smaller grain size, higher surface area and narrow optical band gaps. Moreover, the numbers of coating layer on substrate also have great influence for kinetic of COD removal.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.997-1002
• /
• 2013

본 연구에서는 자성유체의 열-유동 특성을 고찰하기 위하여 밀폐된 정방형관내 자성유체의 열-유동 특성에 관하여 GSMAC법을 이용하여 수치해석적으로 접근하였다. 자성유체의 지배방정식은 자연대류의 연속, 운동량 및 에너지 방정식과 나노자장입자의 자장 및 자화방정식을 추가로 고려하였고 밀폐된 정방형관의 외부에서 가하는 인가자장 세기 및 방향에 따른 자성유체의 온도 및 열전달계수 등의 열전달 특성과 유선 및 등온선도 등의 유동 특성의 변화를 규명하였다. 그 결과, 정방형관내 자장이 수평방향으로 인가될 경우 인가자장 H=-6000에서 평균 Nusselt 수가 0.1592가 되었으며, 자성유체의 열-유동 현상을 인가자장의 세기 및 방향에 따라 제어할 수 있게 되었다.

• 한국표면공학회지
• /
• 제38권3호
• /
• pp.100-105
• /
• 2005

Cr-Si-C-N coatings were deposited on steel substrate (SKD 11) by a hybrid system of arc ion plating (AIP) and sputtering techniques. From XRD, XPS, and HRTEM analyses, it was found that Cr-Si-C-N had a fine composite microstructure comprising nano-sized crystallites of Cr(C, N) well distributed in the amorphous phase of $Si_3N_4/SiC$ mixture. Microhardness of Cr(C, N) coatings and Cr-Si-N coatings were reported about $\~22 GPa$ and $\~35 GPa$, respectively. As the Si was incorporated into Cr(C, N) coatings, The Cr-Si-C-N coatings having a Si content of $9.2 at.\%$ showed the maximum hardness value. As increased beyond Si content of $9.2 at.\%$, the interaction between nanocrystallites and amorphous phase was gone, the hardness was reduced as dependent on amorphous phase of $Si_3N_4/SiC$. In addition, the average coefficient of Cr-Si-C-N coatings largely decreased compared with Cr(C, N) coatings.

• 폴리머
• /
• 제29권1호
• /
• pp.102-105
• /
• 2005

다양한 치아 수복이 가능한 광중합형의 치아수복용 고분자 나노복합체(polymeric dental restorative nanocomposites, PDRNC)를 제조하고 이들의 심미적 물성을 고찰하였다. PDRNC 제조에 사용한 충전제는 평균 입경이 1${\mu}m$인 바륨실리케이트와 40 nm 및 7 nm 크기의 나노실리카를 혼성화시켜 사용하였는데 bisphenol A glycerolate methacrylate와 triethyleneglycol dimethacrylate (60/40 wt%)으로 구성되는 기재와의 혼화성 증가를 위해 실란으로 표면을 소수성으로 처리하였다. 가시광선을 이용한 PDRNC의 광중합에 필요한 광개시제는 camphorquinone을, 광증감제는 2-(dimethylamino)ethyl methacrylate을 사용하였다. 제조된 PDRNC의 심미적 물성을 Hunter L, a, b 값으로 평가한 결과, 7nm 크기의 나노 충전제가 첨가될수록 PDRNC의 투명성이 증가되어 심미적 특성이 향상됨을 알 수 있었다.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.362-368
• /
• 2009

Ti scaffolds with a three-dimensional porous structure were successfully fabricated using powder metallurgy and modified rapid prototyping (RP) process. The fabricated Ti scaffolds showed a highly porous structure with interconnected pores. The porosity and pore size of the scaffolds were in the range of 66$\sim$72% and $300\sim400\;\mu$m, respectively. The sintering of the fabricated scaffolds under the vacuum caused the Ti particles to bond to each other. The strength of the scaffolds depended on the layering patterns. The compressive strength of the scaffolds ranged from 15 MPa to 52 MPa according to the scaffolds' architecture. The alkali treatment of the fabricated scaffolds in an aqueous NaOH solution was shown to be effective in improving the bioactivity. The surface of the alkali-treated Ti scaffolds had a nano-sized fibre-like structure. The modified surface showed a good apatite forming ability. The apatite was formed on the surface of the alkali treated Ti scaffolds within 1 day. The thickness of the apatite increased when the soaking time in a simulated body fluid (SBF) solution increased. It is expected that the surface modification of Ti scaffolds by alkali treatment could be effective in forming apatites in vivo and can subsequently enhance bone formation.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.241-256
• /
• 2018

Objectives: This study aimed to review the characteristics of three-dimensional printing technology focusing on printing types, materials, and health hazards. We discussed the methodologies for exposure assessment on hazardous substances emitted from 3D printing through article reviews. Methods: Previous researches on 3D printing technology and exposure assessment were collected through a literature review of public reports and research articles reported up to July 2018. We mainly focused on introducing the technologies, printing materials, hazardous emissions during 3D printing, and the methodologies for evaluation. Results: 3D printing technologies can be categorized by laminating type. Fused deposition modeling(FDM) is the most widely used, and most studies have conducted exposure assessment using this type. The printing materials involved were diverse, including plastic polymer, metal, resin, and more. In the FDM types, the most commonly used material was polymers, such as acrylonitrile-butadiene-styrene(ABS) and polylactic acids(PLA). These materials are operated under high-temperature conditions, so high levels of ultrafine particles(mainly nanoparticle size) and chemical compounds such as organic compounds, aldehydes, and toxic gases were identified as being emitted during 3D printing. Conclusions: Personal desktop 3D printers are widely used and expected to be constantly distributed in the future. In particular, hazardous emissions, including nano sized particles and various thermal byproducts, can be released under operation at high temperatures, so it is important to identify the health effects by emissions from 3D printing. Furthermore, appropriate control strategies should be also considered for 3D printing technology.