• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.682-685
• /
• 2003

In this paper, we propose the method to measure the Young's modulus of carbon nano tube which was manufactured by chemical vapor deposition. We also made the tungsten tip by electrochemical etching process and the carbon nano tube which was detangled through ultra-sonication with isopropyl alcohol was attached to the tungsten tip. This tip which was composed of tungsten tip and carbon nano tube can be used in Young's modulus measurement by applying DC voltage with counter electrode. The attachment process and measurement of the deflection of carbon nano tube was done under optical microscope.

• Journal of Powder Materials
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2003

Nano-sized WC powders were synthesized by vapor phase reaction using the precusor of tungsten ethoxide under helium and hydrogen atmosphere. The phases of the powder were varied with reaction Bone and gas flow rate. The powder size was about 30nm in diameter, and the tungsten carbide powder was coated by carbon layer. The synthesis of nano-sized WC powders was promoted as the hydrogen gas flow rate became higher. Inversely, tungsten oxide was formed by increasing the flow rate of helium gas. The synthesized powders were analyzed by XRD, FE-SEM, carbon analyzer etc.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4103-4114
• /
• 2024

This research aimed to develop lead-free polymer composites based on poly-methyl methacrylate (PMMA) and embedded with tungsten carbide (WC) micro and nanoparticles for use in radiation protection applications. PMMA was filled with 20 %, 40 %, and 60 % by weight of WC micro- and nanoparticles. The shielding features of the proposed polymer mixtures were evaluated at different radioactive sources of different energies using the HPGe detector. The results revealed that the investigated composites containing micro and nano-structured WC particles showed superior radiation shielding at 81 keV due to the K-edge of the W element occurring at 69.5 keV. The findings also demonstrated that composites loaded with WC nanoparticles were more effective in shielding gamma radiation than those loaded with WC microparticles, even at the same filler wt.%. Furthermore, the sample containing 60 % by weight of nano-WC, coded as P-60nWC, had superior shielding performance than other polymer-based composites reported in the literature. Thus, the proposed nano-WC/PMMA composites can be effectively employed in radiation facilities as alternative environmentally and lead-free radiation shielding materials to protect people and the environment from the harmful risks of gamma radiation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2004.11a
• /
• pp.50-51
• /
• 2004

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.13-17
• /
• 2006

Dense and periodic arrays of holes and tungsten none dots were fabricated on silicon oxide and silicon. The holes were approximately 25 nm wide, 40 nm deep, and 60 nm apart. To obtain nano-size patterns, self-assembling resists were used to produce layer of hexagonally ordered parallel cylinders of polymethylmethacrylate(PMMA) in polystyrene(PS) matrix. The PMMA cylinders were degraded and removed with acetic acid rinse to produce a PS mask for pattern transfer. The silicon oxide was removed by fluorine-based reactive ion etching(RIE). Selectively deposited tungsten nano dots were formed inside nano-sized trench by using a low pressure chemical vapor deposition(LPCVD) method. Tungsten nano dot and trenched silicon sizes were 26 nm and 30 nm, respectively.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.37-42
• /
• 2007

We present a powder injection molding technique of fabricating cemented tungsten carbide(WC) balls for milling and dispersing nano-powder in this paper. The conventional powder metallurgy approach is investigated to reveal its drawbacks of density non-homogeneity. New procedures of powder injection molding for the homogeneous high-precision WC balls, involving the binding process, powder injection molding process and sintering process, are presented in detail. Each process is investigated empirically and numerically to obtain its engineering information, which can used for process optimization.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.377-378
• /
• 2006

Thermal management technology is a critical element in all new chip generations, caused by a power multiplication combined with a size reduction. A heat sink, mounted on a base plate, requires the use of special materials possessing both high thermal conductivity (TC) and a coefficient of thermal expansion (CTE) that matches semiconductor materials as well as certain packaging ceramics. In this study, nano tungsten coated copper powder has been developed with a wide range of compositions, 90W-10Cu to 10W-90Cu. Powder technologies were used to make samples to evaluate density, TC, and CTE. Measured TC lies among theoretical values predicted by several existing models.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.362-363
• /
• 2006

Nano-structured tungsten carbide compacts with cobalt matrices (WC-Co) offer new opportunities for achieving superior hardness and toughness combinations. A unified modeling and simulation tool has been developed to produce maps of sintering pathways from nanocrystalline WC powder to sintered nano-structured WC-Co compacts. This tool includes (1) die compaction, (2) grain growth, (3) densification, (4) sensitivity analysis, and (5) optimization. All material parameters were obtained by curve fitting based on results with two WC-Co powders. Critical processing parameters are determined based on sensitivity analysis and are optimized to minimize grain size with high density.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.130-132
• /
• 2005

Tungsten carbon nitride (W-C-N) thin films were produced by reactive radio frequency (RF) magnetron sputter-ing of tungsten in $Ar-N_2$ gas mixture. The effects of the variation of nitrogen partial pressure on the composition, and structural properties of these films as well as the influence of post-deposition annealing have been studied. When $La_{0.67}Sr_{0.33}MnO_3$ was coated on the W-C-N/Si substrate, coercivity ($H_c$) and magnetization at room temperature shows 58.73 Oe, and 29.4 emu/cc, respectively. In order to improve the diffusion barrier characteristics, we have studied the impurity behaviors to control the ratios of nitrogen and carbon concentrations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.386-386
• /
• 2013

반도체 소자의 소형화, 고집적화로 박막의 다층화 및 선폭의 감소 등의 복잡한 제조 공정이 불가피하고, 따라서 공정 중 실리콘 웨이퍼와 금속 박막사이의 확산을 방지하기 위한 많은 연구가 이루어지고 있다. 하지만 현재까지의 연구는 확산방지막의 nano-mechanics 특성 분석에 대한 연구는 전무하다. 본 논문에서 tungsten (W)을 주 물질로, nitrogen (N)을 첨가한 확산방지막을 질소 유량을 2.5, 5, 7.5, 10 sccm으로 변화시켜가면서 rf magnetron sputter 방법으로 tungsten-nitride (W-N) 박막을 증착하였다. 박막의 기본 물성인 증착율, 비저항 및 결정학적 특성을 ${\beta}$-ray, 4-point probe, X-ray diffraction (XRD)를 이용하여 측정하였고, 측정결과 증착 중 질소 유량이 증가할수록 W-N 박막의 비저항은 증가하였고 반대로 증착율과 결정성은 감소하였다. 이는 기존의 연구 결과와 비교하여 일치한 결과로 증착된 박막이 신뢰성을 가짐을 확인하였다. 이후 가장 관심사인 nano-mechanics 특성은 nano-indenter를 이용하여 측정하였다. 측정 결과 시료는 증착 중 질소 유량이 2.5 sccm인 시료를 기준으로 5 sccm 포함된 박막에서 load force-depth 그래프가 급격히 변화하는 경향을 나타내었고, 표면강도(surface hardness)는 10.07 GPa에서 15.55 GPa로 증가하였다. 이후 질소 유량이 7.5 sccm과 10 sccm에서는 12.65 GPa와 12.77 GPa로 질소 유량이 5 sccm 포함된 박막보다 상대적으로 감소하였다. 이는 박막내 결정상으로 존재하는 질소와 비정질 상태로 존재하는 질소의 비율에 의한 것이고, 압축력에 기인하는 스트레스 증가로 판단된다.