통합 검색 | Korea Science

이준숭;문지훈;주성욱;이승욱;김민일
- 공업화학
- /
- 제34권6호
- /
- pp.608-612
- /
- 2023
탄소블록의 열전도도를 증가시키기 위하여 탄소블록 제조 공정 중 nano-diamond (ND)를 첨가하였다. 첨가된 ND는 탄화 과정에서 바인더 피치의 휘발로 인하여 생성된 탄소블록의 기공을 제어하였다. ND의 첨가는 코크스 및 바인더 피치의 혼련 공정에 추가하였으며, 성형, 탄화를 거쳐 탄소블록을 제조하였다. 첨가된 ND의 양이 증가할수록 탄소블록의 ND 비율이 증가하였다. 첨가된 ND는 탄화 과정에서 바인더 피치의 휘발로 인하여 발생하는 가스의 이동 통로 역할을 하여 탄소블록의 밀도를 높이고, 기공률을 감소시켰다. ND의 첨가를 통하여 높아진 밀도, 낮아진 기공률, ND의 높은 열전도도를 통하여 탄소블록의 열전도도를 향상시킬 수 있었다.
https://doi.org/10.14478/ace.2023.1097 인용 PDF

이지우;정가운
- EDISON SW 활용 경진대회 논문집
- /
- 제4회(2015년)
- /
- pp.324-329
- /
- 2015
First-principles investigations on the hybrid one dementional hexagonal hybrboron-nitride nano ribbons (BNNRs) with a armchair graphene nano-ribbons(AGRNRs), are presented. Electronics properties of the mixed armchair BNC nano-ribbon (BNCNRs) structure show control of a band gap on all cases at the special K-point. And we have studied, the band gap is direct in all cases. The band gap of mixed ABNCNRs could be divided into three groups (${\Delta}3p$, ${\Delta}3p+1$ and ${\Delta}3p+2$) and decrease with the increase of the width. Also these results show similar to the AGNRs case. Different from the band gap value ordering of AGNRs (${\Delta}3p+1$ > ${\Delta}3p$ > ${\Delta}3p+2$), the ordering of ABNCNRs is ${\Delta}3p$ > ${\Delta}3p+1$ > ${\Delta}3p+2$. The discrepancy may come from the differences between the edges of AGRNRs and the boundaries of hybrid BNCNRs. In addition, the bandgap of ABNCNRs are much smaller than those of the corresponding AGNRs. Our results show that the origin of band gap for BNCNRs with armchair shaped edges arises from both quantum confinement effect of the edges. These results similar to thecase of AGNRs. These properties of hybrid BN/C nano-ribbon structure may offer suitable bandgap to develop nnanoscale electronics and solar cell beyond individual GNRs and BNNRs.
PDF

이수영;임경호;전병세
- 한국세라믹학회지
- /
- 제34권4호
- /
- pp.406-412
- /
- 1997
Al2O3/SiC hybrid-composite has been fabricated by the conventional powder process. The addition of $\alpha$-Al2O3 as seed particles in the transformation of ${\gamma}$-Al2O3 to $\alpha$-Al2O3 provided a homogeneity of the microstructure. The grain growth of Al2O3 are significantly surpressed by the addition of nano-size SiC particles. Dislocation were produced due to the difference of thermal expansion coefficient between Al2O3 and SiC and piled up on SiC particles in Al2O3 matrix, resulting in transgranular fracture. The high fracture strength of the composite was contributed to the grain refinement and the transgranular fracture mode. The addition of SiC platelets to Al2O3/SiC nano-composite decreased the fracture strength, but increased the fracture toughness. Coated SiC platelets with nitrides such as BN and Si3N4 enhanced fracture toughness much more than non-coated SiC platelets by enhancing crack deflection.
PDF

박재준
- 전기학회논문지
- /
- 제68권1호
- /
- pp.52-60
- /
- 2019
In this paper, four types of insulation coils were fabricated by adding various kinds of glycols to improve the flexibility and adhesion of insulating coils in varnish dispersed with PAI / Nano Silica_15wt%. The applied voltage and frequency were 1.5 kV / 20 kHz for accelerated life evaluation. Through the 6th temperature stress level, the cause of the insulation breakdown of the coil was ignored and only the breakdown time was measured. The Arrhenius model was chosen based on the theoretical relationship between chemical reaction rate and temperature for estimating the insulation life of the coil due to accelerated thermal stress. Three types of distributions (Weibull, Lognormal, Exponential) were selected as the relationship between thermal stress model and distribution. The average insulation lifetime was estimated under the temperature stress of four types of insulation coils through the relationship between one kind of model and three kinds of distributions.
https://doi.org/10.5370/KIEE.2019.68.1.52 인용 PDF HTML