• 한국환경과학회지
• /
• 제8권3호
• /
• pp.399-409
• /
• 1999

The three domestic natural zeolites(Yong dong-ri (Y), Daesin-ri (D), Seogdong-ri (S)) harvested in Kyeongju-shi and Pohang-shi, Kyungsangbug-Do, were pretreatd with each of the NaOH, $Ca(OH)_2$ and NaOH following HCl solutions, and the removal performances of divalent haevy metals(Cu, Mn, Pb, and Sr) for natural and pretreated zeolites were investigated and compared in the single and mixed solutions. The natural zeolite-heavy metal system attained the final equilibrium plateau within 20 min, irrespective of initial heavy metal concentration. The heavy metal uptakes increased with increasing initial heavy metal concentration and pH. The heavy metal uptakes for natural zeolites decreased in the following sequences : D>Y>S among the natural zeolites; Pb>Cu>Sr>Mn among the heavy metals. The pretreated zeolites showed higher heavy metal removal performances than natural zeolites and decreased in the order of NaOH, NaOH following HCl, $Ca(OH)_2$ treatment among the pretreatment methods. The heavy metal ion exchange capacity by natural and pretreated zeolites was described either by Freundlich equation or Langmuir equation, but it followed the former better than the latter. The heavy metal uptakes for natural zeolites decreased in the mixed solution, in comparing with those in the single solution and especially, the manganese uptake decreased greatly in the mixed solution. The pretreated zeolites showed the improved removal performances of heavy metals in the mixed solution than in the single solution and the heavy metal uptakes by those in the mixed solution showed the same trends in the single solution among the chemical treatment methods and heavy metals.

• Carbon letters
• /
• 제12권3호
• /
• pp.131-137
• /
• 2011

Kenaf fibers, cellulose-based natural fibers, were used as precursor for preparing kenafbased carbon fibers. The effects of carbonization temperature ($700^{\circ}C$ to $1100^{\circ}C$) and chemical pre-treatment (NaOH and $NH_4Cl$) at various concentrations on the thermal change, chemical composition and fiber morphology of kenaf-based carbon fibers were investigated. Remarkable weight loss and longitudinal shrinkage were found to occur during the thermal conversion from kenaf precursor to kenaf-based carbon fiber, depending on the carbonization temperature. It was noted that the alkali pre-treatment of kenaf with NaOH played a role in reducing the weight loss and the longitudinal shrinkage and also in increasing the carbon content of kenaf-based carbon fibers. The number and size of the cells and the fiber diameter were reduced with increasing carbonization temperature. Morphological observations implied that the micrometer-sized cells were combined or fused and then re-organized with the neighboring cells during the carbonization process. By the pre-treatment of kenaf with 10 and 15 wt% NaOH solutions and the subsequent carbonization process, the inner cells completely disappeared through the transverse direction of the kenaf fiber, resulting in the fiber densification. It was noticeable that the alkali pre-treatment of the kenaf fibers prior to carbonization contributed to the forming of kenaf-based carbon fibers.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.431-435
• /
• 2016

본 논문에서는 감마선 조사가 NaOH 전처리를 이용한 우드칩의 당화에 미치는 영향을 살펴보았다. 당화량은 전처리된 우드칩에 효소를 이용하여 가수분해한 후 생성된 환원당과 포도당 양을 측정하여 확인하였다. 10 g/L NaOH 처리한 우드칩을 각각 50, 100, 200 kGy 세기의 감마선을 조사하여 당화량을 측정하였다. 우드칩의 가수분해 수율을 비교했을 때, 200 kGy 감마선 조사한 우드칩에서 가장 높은 환원당 함량 12.2 g/L이 얻어졌다. 또한 전처리 과정에서의 감마선 조사 단계의 영향을 평가하기 위하여 우드칩을 먼저 50, 100, 200 kGy 감마선 조사한 후, 10 g/L NaOH 로 전처리하였다. 200 kGy 감마선 조사 후 NaOH 전처리를 수행했을 때 환원당 함량은 13.4 g/L로 전처리 이후의 감마선 조사구보다 증가하였고, 7.9 g/L 포도당을 얻을 수 있었다. 이러한 결과로부터 감마선 조사가 셀루로오즈 바이오매스 전처리에 활용 가능할 것으로 기대된다.

• 폴리머
• /
• 제38권6호
• /
• pp.815-819
• /
• 2014

조직공학에서의 인공지지체는 세포의 부착과 증식 및 분화가 잘 되어야 하고, 우수한 생체친화성 및 생분해성을 지녀야 한다. 다양한 인공지지체 제작 방법이 시도되어지고 있으며, 최근들어 3D 프린팅 기술을 이용한 방식이 활발하게 연구되어지고 있다. 폴리카프로락톤(polycaprolactone, PCL)은 낮은 녹는점을 가지고 있어 3D 프린팅하기에 우수한 생체적합 고분자 합성재료이다. 본 연구에서는 3D 프린팅 기술을 이용하여 3차원 PCL 인공지지체를 제작하였고, 지지체의 표면개질을 위해 수산화나트륨(NaOH)을 이용하였다. 표면개질된 인공지지체의 표면특성을 SEM으로 확인한 결과, 수산화나트륨을 처리한 PCL 인공지지체가 처리하지 않은 PCL 인공지지체에 비해 거칠기가 증가함을 보였으며, 접촉각 측정을 통해 친수성이 증가함을 확인하였다. In vitro 실험결과, 수산화나트륨을 처리한 PCL 인공지지체가 처리하지 않은 PCL 인공지지체에 비해 세포의 증식과 분화가 증가함을 보였고, 세포의 부착 모습은 균일하고 밀집된 형태로 부착됨을 확인하였다. 따라서 조형가공기술을 이용하여 수산화나트륨을 처리한 표면개질된 PCL 인공지지체를 제작하고 분석함으로써, 세포적합성을 통해 체내 인공지지체 개발 적용 가능성을 제시하였다.

• 유기물자원화
• /
• 제27권3호
• /
• pp.27-39
• /
• 2019

본 연구에서는 음식물류 폐기물과 하수슬러지의 효과적인 병합 혐기성 처리를 위한 열화학적 가수분해 방법의 최적 조건 평가와, 열화학적 가수분해에 따른 병합 혐기성 소화 효율에 대해 평가 하였다. 열화학적 가수분해는 온도 (80, 100, 120, 140, 160, $180^{\circ}C$)와 NaOH (5, 20, 40, 60, 100 meq/L) 조건에 따른 solubilization COD, CST(Capillary Suction Time), TTF(Time to Filter), volatile fatty acids (VFAs) 등에 대해 평가를 하였으며, 병합 혐기성 소화 효율평가는 biochemical methane potential (BMP) test를 통해 평가하였다. 실험결과 음식물류폐기물과 하수슬러지의 열화학적 가수분해 시 온도 $140^{\circ}C$, NaOH 60 meq/L에서 solubilization COD 20 % 이상, CST와 TTF가 60초 이하, VFAs 농도가 12,000 mg-COD/L 이상으로 최적조건으로 규명되었다. 병합 혐기성 소화 결과도 열화학적 가수분해 조건과 동일한 조건에서 가스발생량이 가장 높았다. 따라서, 음식물류폐기물과 하수슬러지의 효과적인 병합혐기성소화를 위한 열화학적 가수분해 전처리 조건은 온도 $140^{\circ}C$, NaOH 주입농도 60 meq/L라 판단된다.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.336-339
• /
• 1998

Bioactive titanium metal can be prepared by simple 5M-NaOH treatment and subsuquent heat treatment at $600^{\circ}C$ to form an amorphous sodium titanate on its surface. In the present study, mechanism of apatite formation on the titanium metal was investigated by examining its surface compositional and structural changes in a simulated body fluid. The apatite formation on the metal was found to proceed in the sequence of 1)$Na^+$ ion release from the sodium titanate to form hydrated titania abundant in Ti-OH groups, 2) early and selective binding of calcium ions with the Ti-OH groups to form a calcium titanate, and 3) late binding of phosphate ions to make apatite nucleation and growth. This indicates that Ti-OH groups do not directly induce the apatite nucleation, but via formation of a calcium titanate.

• 대한화학회지
• /
• 제13권2호
• /
• pp.157-164
• /
• 1969

Aoolphane was treated with 30% Hydrochloric acid at $18^{\circ}C$ for two hows with stirring in order to obtain the insoluble form of SiO2 gel and to extract quantitatively both $Al_2O_3$as and $Fe_2O_3AlCl_3{\cdot}6H_2O Fe$ and $Cl_3{\cdot}6H_2O$ forms, respectively, at the same time. $SiO_2$ gel was filtered and to the filterate Ammonia was added to precipitate $Al(OH)_3[Fe(OH)_3 Contaminated ]$ The precipitate was separated by filteration and the filterate was recovered as the form of $NH_4Cl$. The precipitate was treated with 200g (NaOH)/l Concentration of NaOH a little excessively to the equivalent at $65~70^{\circ}C$ as $Fe(OH)_3$ formed was insoluble, it was filtered of and to the filterate containing $NaAl(OH)_4(OH_2)_2$Carbon dioxide gas was bubbled at $50^{\circ}C~90^{\circ}C$ to obtain the precipitate with excellent filterability and crystallinity. The product was certified to be Dawsonite $(NaAl(OH)_2CO_3)$ by X-Ray diffraction analysis at below $40^{\circ}C$, when $CO_2$ gas was bubbled into the relatively lower concentration of $NaAl(OH)_4(OH_2)_2$ solution, the precipitate of very fine particles was formed, which was hard to filter and with the Composition of $\alpha-Al_2O_3-H_2O$ (Boehmite).

• 유기물자원화
• /
• 제30권4호
• /
• pp.27-40
• /
• 2022

본 연구에서는, 탈수슬러지 및 음식물류폐기물의 효율적인 병합혐기성소화를 위해 폐기물의 혐기성소화 가능성 및 열화학적 전처리 방법에 대해 평가하였다. 폐기물의 혐기성소화 가능성 평가 결과, 음식물류폐기물이 탈수슬러지에 비해 혐기성미생물에 의해 분해 가능한 유기물 농도 및 methane yield가 각각 2.2배, 1.3배 더 높게 평가되었다. 바이오가스 발생량의 증대를 위해서는, 음식물류폐기물의 혼합비율을 증가시키는 것이 필요할 것으로 판단되었으며, 열화학적 전처리 효율은 반응온도, NaOH 주입량, 반응시간, 혼합비율 조건에 대해 평가하였다. 전처리 효율 및 탈수능을 통해 평가한 결과, 최적 열화학적 가용화 전처리 조건은 반응온도 140℃, NaOH 주입량 60 meq/L, 반응시간 60 min, 혼합비율 1:5로 평가되었다. 최적 열화학적 가용화 전처리 조건 적용 전과 후의 methane yield를 비교한 결과, 전처리를 적용한 경우에서, 가스발생속도 및 methane yield가 각각 1.6, 1.5배 증가하였다. 따라서, 탈수슬러지 및 음식물류폐기물의 효율적인 병합혐기성소화를 위해서는 음식물류폐기물의 혼합비율을 증가시키며, 폐기물의 전처리를 통해 가용화 효율을 증대시키는 것이 필요하다고 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권3호
• /
• pp.358-363
• /
• 2008

The intracytoplasmic sperm injection (ICSI) procedure has recently been utilized to produce transgenic animals and may serve as an alternative to the conventional pronuclear microinjection in species such as pigs whose ooplasm is opaque and pronuclei are often invisible. In this study, the effects of sperm membrane disruption and electrical activation of oocytes on in vitro development and expression of transgene green fluorescent protein (GFP) in ICSI embryos were tested to refine this recently developed procedure. Prior to ICSI, sperm heads were treated with Triton X-100+NaCl or Triton X-100+NaCl+NaOH, to disrupt membrane to be permeable to exogenous DNA, and incubated with linearized pEGFP-N1 vector. To induce activation of oocytes, a single DC pulse of 1.3 kV/cm was applied to oocytes for $30{\mu}sec$. After ICSI was performed with the aid of a micromanipulator, in vitro development of embryos and GFP expression were monitored. The chemical treatment to disrupt sperm membrane did not affect the developmental competence of embryos. 40 to 60% of oocytes were cleaved after injection of sperm heads with disrupted membrane, whereas 48.6% (34/70) were cleaved without chemical treatment. Regardless of electrical stimulation to induce activation, oocytes were cleaved after ICSI, reflecting that, despite sperm membrane disruption, the perinuclear soluble sperm factor known to mediate oocyte activation remained intact. After development to the 4-cell stage, 11.8 (2/17, Triton X-100+NaCl+NaOH) to 58.8% (10/17, Triton X-100+NaCl) of embryos expressed GFP. The expression of GFP beyond the stage of embryonic genome activation (4-cell stage in the pig) indicates that the exogenous DNA might have been integrated into the porcine genome. When sperm heads were co-incubated with exogenous DNA following the treatment of Triton X-100+NaCl, GFP expression was observed in high percentage (58.8%) of embryos, suggesting that transgenic pigs may efficiently be produced using ICSI.

• 한국결정성장학회지
• /
• 제33권1호
• /
• pp.15-21
• /
• 2023

산화아연 분말을 제조하기 위해 3종류의 나트륨계 알칼리 침전제인 수산화나트륨, 탄산나트륨, 수산화나트륨/탄산수소나트륨을 이용하여 반응에 따른 열역학적 고찰과 아연 침전생성물로부터 산화아연 분말 제조 공정의 차이점을 비교하였다. 나트륨계 알칼리 침전제와의 반응으로 생성된 아연 침전생성물은 각각 히드록시염화아연(Zn₅(OH)₈Cl₂·H₂O)과 탄산아연수산화물 (Zn₅(OH)₆(CO₃)₂·H₂O)임을 XRD를 통해 확인하였다. 나트륨계 알칼리 침전제에 따라 800℃에서 열처리하여 생성된 산화아연 입자 크기를 비교하였다. 혼합된 수산화나트륨 및 탄산수소나트륨의 알칼리 침전제 반응으로 보다 균일한 산화아연 입자를 제조할 수 있었다.