• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.770-774
• /
• 2003

The effects of pH and/or NaCl concentration on the Fat Binding Capacity (FBC) of rhamnolipid and the physical properties of surimi gel containing rhamnolipid were investigated. The FBC of rhamnolipid was measured 162% of value at pH 7 and 0% NaCl concentration. The whiteness of surimi gel containing rhamnolipid significantly (p< 0.05) lower than control. In contrast, surimi gel containing rhamnolipid compare with control were enhanced significantly(p < 0.05) breaking force and deformation.

• Membrane and Water Treatment
• /
• v.5 no.4
• /
• pp.251-263
• /
• 2014

The study contributes in the treatment of waste generated by the textile complex cotton of Draa Ben Khedda, Algeria. The azo dye "Direct Red Solophenyle 4GE" represents the base particle of the discharges and electrocoagulation with nanofiltration are used as a means of treatment. The solar photovoltaic is suitable for electrochemical process to reduce the energy cost. Several study parameters are considered in this work. The electrocoagulation batch gives the best reduction 37% for a dye concentration of 7.21 mg/L ($[NaCl]_{added}$=1g/L; $j=25.2mA/cm^2$). Coupling methods (electrocoagulation-nonofiltration) gives a complete discoloration rejecting concentration 52.4 mg/L (pHi = 7.6, $[NaCl]_{added}$=3g/L, $j=2.13mA/cm^2$). The result shows the coupling efficiency with a reduced amount of resulting slurry at the end of treatment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.705-710
• /
• 2003

In this study, to confirm the diffusion coefficient of chloride ion is affected by the concentration of NaCl solution, capacity of voltage, time of an electric current, the diffusion coefficient of chloride ion in concrete was investigated through an electrochemical accelerated test. and the results of these test were compared with the diffusion coefficient of chloride ion by test of sodium chloride solution digestion. As the results of this study, the diffusion coefficient of chloride ion wasn't affected by the concentration of NaCl solution, capacity of voltage, time of an electric current within the range of this study and was similar to the diffusion coefficient of chloride ion by test of sodium chloride solution digestion.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.223-236
• /
• 2013

The paper presents an experimental set-up for osmotic membrane distillation, which can be operated continuously for several weeks. NaCl solutions were used as an osmotic solution. The influence of osmotic solution concentration on the obtained permeate flux is presented. The experimental set-up was equipped with a system for the regeneration of dilute brine. The regeneration was carried out using a method of natural evaporation to the air surrounding the installation. The evaporation area was created by the Białecki rings, assembled in the form of tower. The obtained evaporation rate was sufficient to maintain a constant NaCl concentration (over 300 g/L), for air with the relative humidity in the range of 30-80%. Accurel PP S6/2 hydrophobic polypropylene membranes were used in the study. The membranes exhibited 100% rejection for 600 h of the process duration.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.324-331
• /
• 2003

Particulate leaching method for the preparation of porous PLLA scaffolds was carried out and especially, the effect of PLLA/$CHCl_3$ solution concentration on the salt leaching rate and the pore structure of PLLA scaffolds were considered. It was found that maintaining lower PLLA/$CHCl_3$ concentration and higher $CHCl_3$ evaporation temperature in the preparation of PLLA/NaCl mixtures resulted in the enhancement of salt leaching rat e and higher porosity. This is understood that those conditions could minimize the formation of dense PLLA layer on the surface of PLLA/NaCl mixture as well as introducing better porosity on the surface. Higher salt leaching temperature accelerated the salt leaching rate but it seems that there is no influence on the porosity of PLLA scaffolds.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.332-336
• /
• 2007

Pseudomonas stutzeri strain KCCM 34719 was used in this experiment to determine the effects of increasing Pb(II) concentrations on its growth rate. To obtain optimum growth conditions, strain KCCM 34719 was cultivated in nutrient broth under various conditions, such as temperature, pH, and NaCl concentration. Optimal conditions for cell growth were $30^{\circ}C$ of temperature, 8.0 of pH, and 3% of NaCl concentration, respectively. Growth response of bacterial cell to Pb(II) showed tolerance to concentrations ranging from 10 to 100 mg ${\ell}^{-1}$ in liquid culture, following a growth pattern similar to the control. Growth rate was greatly inhibited at 200 mg ${\ell}^{-1}$ of Pb(II).

• Macromolecular Research
• /
• v.16 no.8
• /
• pp.670-675
• /
• 2008

A series of pH and temperature-responsive (N,N-diethylacrylamide-co-methylacrylic acid) copolymers were synthesized by radical copolymerization and characterized by elemental analysis, Fourier-transform infrared (FT-IR), nuclear magnetic resonance (NMR) $^1H$, $^{13}C$ and LLS. The effects of salt and pH on the phase transition behaviors of the copolymers were investigated by uv. With increasing NaCl concentration, significant salt effects on their phase transition behaviors were observed. UV spectroscopic studies showed that the phase transition became faster with increasing NaCl concentration. In addition, the phase transition behaviors of copolymers were sensitive to pH. The pH and temperature sensitivity of these copolymers would make an interesting drug delivery system.

• Corrosion Science and Technology
• /
• v.15 no.1
• /
• pp.13-17
• /
• 2016

The aim of this study was to evaluate the use of iron-nickel oxide ($Fe_2O_3$.NiO) nanopowder (FeNi) as an anti-corrosion pigment for a different application. The corrosion protection ability and the mechanism involved was determined using aqueous solution of FeNi prepared in a corrosive solution containing 3.5 wt.% NaCl. Anti-corrosion abilities of aqueous solution were determined using electrochemical impedance spectroscopy (EIS) on line pipe steel (API 5L X-80). The protection mechanism involved the adsorption of metallic cations on the steel surface forming a protective film. Analysis of EIS spectra revealed that corrosion inhibition occurred at low concentration, whereas higher concentration of aqueous solution produced induction behavior.

• Journal of Life Science
• /
• v.10 no.2
• /
• pp.196-201
• /
• 2000

The production of tetrodotoxin (TTX) using Vibrio sp. YE-101, a novel marine microorganism isolated from the intestine of pufferfish, was investigated. Culture condition was optimized for the enhanced production of TTX using response surface methodology. The experimental sets of environmental conditions including pH, temperature and NaCl concentration were designed using central composite experimental design. The optimal conditions of pH, temperature and NaCl concentration were determined to be 8.1, 29.2℃, and 2.6% (w/v) respectively. The relative growth extent could be enhanced up to 80%, and final mouse unit (MU) value of TTX was also enhanced up to 87% by response surface optimization.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.76-83
• /
• 1999

Fracture toughness({TEX}$J_{IC}${/TEX}) on 304 austenitic stainless steel weldments artificially degraded for long period under SCC environments were evaluated to investigate its reliability and environmental characteristics. Electro-chemical polarization tests were previously carried out to evaluate corrosion susceptiblility of weldment, and stress corrosion cracking was tested under various conditions of 3.5wt.% NaCl solution, the temperature of $25^{\circ}$C and $95^{\circ}$C, and oxygen concentration during 3000hours. From the results obtained, it was found that 304 stainless steel weldment was so susceptible under high temperature and high oxygen concentration of 3.5wt.% NaCl solution, and fracture toughness({TEX}$J_{IC}${/TEX}) was also considerably reduced by material degradation.