• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.147-153
• /
• 2015

Wet-tissue has been used for baby wipe, cleansing pads, industrial wipes, pain relief, personal hygiene, pet care, and healthcare at home, care facilities, restaurant, and hospital. Raw materials of wet-tissue are mainly natural fibers and synthetic fibers such as cotton, rayon, PET (polyethylene terephthalate) and so on. In this study, electrolytic water of NaCl solution was used as fluid in wet-tissue, and the effect of raw materials on antibacterial rate of wet-tissue was investigated. Rayon (100%) showed an excellent antibacterial rate compared with cotton (100%) and rayon:PET (50:50). Antibacterial rate increased as Cl concentration of electrolytic water increased. Absorption of rayon:PET (50:50) was uneven and antibacterial rate of wet-tissue slightly increased by increase of Cl concentration. Antibacterial rate of wet-tissue was 100% under the conditions of more than 1.5 mL of electrolytic water dosage, and dropped under 50% after storage period of 48 hours.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.5
• /
• pp.325-331
• /
• 2018

Calcium carbonate($CaCO_3$) films were formed by an eco-friendly electro-chemical technique on steel substrates in synthesized distilled water solutions containing $NaHCO_3$, $CaCl_2$ and $MgCl_2$ with different ratio respectively. It was investigated to confirm the effect of $Mg^{2+}$ concentration by Scanning Electron Microscopy(SEM), Energy Dispersive x-ray Spectroscopy(EDS) and X-Ray Diffraction(XRD) respectively. From an experimental result, only calcite crystals were found in solution containing no $Mg^{2+}$. By increasing concentration of $Mg^{2+}$, deposition rate decreased and crystal structure was transformed form calcite to aragonite. In case of including $MgCl_2$ 300mM in synthesized solutions containing $NaHCO_3$, $CaCl_2$ 60mM, it was showed over the 90% of aragonite contents which have quite high deposition rate of aragonite. Also, it was confirmed that $Mg^{2+}$ acted as inhibitor on the films which made transforming from calcite to aragonite.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.386-392
• /
• 2023

In this work, we describe the reduction kinetics of gold nanoparticles synthesized by plasma discharge in aqueous solutions with varied voltages and precursor (HAuCl₄) concentrations. The reduction rate of [AuCl₄]^- was determined by introducing NaBr to the gold colloidal solution synthesized by plasma discharge, serving as a catalyst in the reduction process. We observed that [AuCl₄]^- was completely reduced when its characteristic absorption peak at 380 nm disappeared, indicating the absence of [AuCl₄]^- for ligand exchange with NaBr. The reduction rate notably increased with the rise in discharge voltage, attributable to the intensified plasma generated by ionization and excitation, which in turn accelerated the reduction kinetics. Regarding precursor concentration, a lower concentration was found to retard the reduction reaction, significantly influencing the reduction kinetics due to the presence of active H⁺ and H radicals. Therefore, the production of strong plasma with high plasma density was observed to enhance the reduction kinetics, as evidenced by optical emission spectroscopy.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.541-545
• /
• 2002

Stability of Monascus pilosus pigment was investigated under various conditions. The concentration of the pigments stored under air and sub-atmosphere (250 mmHg) for 30 days at room temperature decreased by 77.9% and 48.4%, respectively. The pigment solution was stable under temperature ranges of $20-80^{\circ}C$, pH 4-8, darkness and presence of KCl, NaCl, $CaCl_2$, $MgCl_2$, and $ZnCl_2$. In contrast, the pigment solution was relatively unstable, decreasing in concentration by 6.0 and 11.6% at 100 and $121^{\circ}C$, 15.5 and 13.7% at pH 3 and 9, 22.9 and 66.8% under fluorescence and sun light, respectively, and 20.2% in the presence of $AlCl_3$.

• Membrane Journal
• /
• v.29 no.3
• /
• pp.140-146
• /
• 2019

In this study, a selective layer of poly styrene sulfonic acid (PSSA) and polyethyleneimine (PEI) was formed by layer-by-layer method onto a porous polyacrylonitrile (PAN) hollow fiber membrane as the suppoter membrane. The salting out method was used by adding Mg salt to the coating solution. Several experimental conditions of the ionic strength, polymer concentration, and coating time were investigated, and the flux and rejection were measured at the operating pressure of 2 atm for 100 mg/L of NaCl, $MgCl_2$, and $CaSO_4$ as the feed solution. The membranes coated with PSSA 20,000 ppm, coating time 3 minutes, ionic strength 1.0, PEI 30,000 ppm, coating time 1 minute, and ionic strength 0.1 were observed the best. In the 100 ppm NaCl, $MgCl_2$, and $CaSO_4$ feed solutions, the flux of 20.4, 19.4, and 18.7 LMH, and the rejection of 67, 90, and 66.6%, respectively.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• BMB Reports
• /
• v.44 no.5
• /
• pp.341-346
• /
• 2011

The single-stranded DNA binding activity of the Escherichia coli RecA protein is crucial for homologous recombination to occur. This and other biochemical activities of ssDNA binding proteins may be affected by various factors. In this study, we analyzed the effect of $CaCl_2$, NaCl and $NH_4NO_3$ salts in combination with the pH and nucleotide cofactor effect on the ssDNA-binding activity of RecA. The studies revealed that, in addition to the inhibitory effect, these salts exert also a stimulatory effect on RecA. These effects occur only under very strict conditions, and the presence or absence and the type of nucleotide cofactor play here a major role. It was observed that in contrast to ATP, ATP${\gamma}$S prevented the inhibitory effect of NaCl and $NH_4NO_3$, even at very high salt concentration. These results indicate that ATP${\gamma}$S most likely stabilizes the structure of RecA required for DNA binding, making it resistant to high salt concentrations.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.204-208
• /
• 2012

A novel chemiluminescence (CL) flow injection method for the determination of balofloxacin is described. The method is based on the weak CL signal arising from the reaction of $KBrO_3$ with $Na_2S_2O_4$ in acidic medium being significantly enhanced by balofloxacin in the presence of europium (III) ion and sodium dodecyl benzene sulfonate (SDBS). The experimental conditions that affected CL intensity were carefully optimized and the CL reaction mechanism was briefly discussed. Under the optimum conditions, the relative CL intensity was proportional to the concentration of balofloxacin in the range of $7.0{\times}10^{-11}$ to $3.0{\times}10^{-7}g\;mL^{-1}$. The detection limit was $2.7{\times}10^{-11}g\;mL^{-1}$ and the relative standard deviation was 2.1% for $7.0{\times}10^{-10}g\;mL^{-1}$ balofloxacin (n = 13). The proposed method was successfully applied to the determination of balofloxacin in pharmaceutical formulations and biological fluids.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.2
• /
• pp.94-99
• /
• 2004

This study was conducted to determine the effect of salinity on the growth and development of Korean ginseng (Panax ginseng C.A.Meyer) and to evaluate the inorganic ion content in Korean ginseng with different general complete fertilizer (GCF) and NaCI concentrations at two growth stages. The stem height of Korean ginseng treated with different GCF and NaCI concentrations decreased at the higher EC (2.0 dS m$^{-1}$ ), but there were no significant difference in the stem diameter, the leaf length, and the leaf width among different treatments. The root growth increased with the supply of GCF. Especially, the root growth was facilitated two times at 3.0 dS $\textrm{m}^{-1}$ as compared to control. But the root growth more sharply decreased with NaCI treatment than GCF. The $\textrm{K}^{+}$ and $\textrm{Mg}^{2+}$ content in leaves and roots increased with GCF at the early growth stage. At the late growth stage, the $\textrm{K}^{+}$ content in leaves decreased but the $\textrm{Ca}^{2+}$ and $\textrm{Mg}^{2+}$ content increased. The $\textrm{Ca}^{2+}$ and $\textrm{Mg}^{2+}$ content in roots increased but the $\textrm{K}^{+}$ content decreased. The $\textrm{Na}^{+}$ content in Korean ginseng increased sharply with NaCl treatment. The $\textrm{NO}_3^{-}$ content in leaves and $\textrm{NH}_4^{+}$ content in leaves and roots increased as GCF concentration increased. The $\textrm{NO}_3^{-}$ content in leaves, stems, and roots at the late growth stage decreased as NaCl concentration increased. The $\textrm{NH}_4^{+}$ content in leaves and roots decreased significantly at the early growth stage, but it decreased significantly in leaves and stems at the late growth stage. The root activity of Korean ginseng increased with GCF, but decreased as the EC increased with NaCl. The water potential of leaves with GCF showed no significant difference compare to control, but the water potential of leaves treated with NaCl decreased as EC increased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.3
• /
• pp.432-438
• /
• 2017

Objective: The objective of this study was to evaluate the effect of combinations of $NaNO_2$ and NaCl concentrations on Listeria monocytogenes (L. monocytogenes) growth in emulsion-type sausage. Methods: Emulsion-type sausages formulated with different combinations of $NaNO_2$ (0 and 10 ppm) and NaCl (1.00%, 1.25%, and 1.50%) were inoculated with a five-strain L. monocytogenes mixture, and stored at $4^{\circ}C$, $10^{\circ}C$, and $15^{\circ}C$, under aerobic or vacuum conditions. L. monocytogenes cell counts were measured at appropriate intervals, and kinetic parameters such as growth rate and lag phase duration (LPD) were calculated using the modified Gompertz model. Results: Growth rates increased (0.004 to 0.079 Log colony-forming unit [CFU]/g/h) as storage temperature increased, but LPD decreased (445.11 to 8.35 h) as storage temperature and NaCl concentration increased. The effect of combinations of NaCl and low-$NaNO_2$ on L. monocytogenes growth was not observed at $4^{\circ}C$ and $10^{\circ}C$, but it was observed at $15^{\circ}C$, regardless of atmospheric conditions. Conclusion: These results indicate that low concentrations of $NaNO_2$ and NaCl in emulsion-type sausage may not be sufficient to prevent L. monocytogenes growth, regardless of whether they are vacuum-packaged and stored at low temperatures. Therefore, additional techniques are necessary for L. monocytogenes control in the product.