• 제목/요약/키워드: NY섬유

검색결과 34건 처리시간 0.023초

섬유 종류가 도로포장용 콘크리트의 기초적 특성에 미치는 영향 (Effect of Fiber Types on Fundamental Properties of Pavement Concrete)

  • 한천구;박종섭;정우태;전규남
    • 콘크리트학회논문집
    • /
    • 제22권4호
    • /
    • pp.473-479
    • /
    • 2010
  • 이 연구에서는 도로포장용 콘크리트의 성능향상을 목적으로 폴리프로필렌(PP), 나일론(NY), 폴리비닐알코올(PVA) 및 셀룰로우스(CL)의 섬유 종류에 변화를 주어 도로포장용 섬유보강 콘크리트(FRC)의 공학적 특성을 분석하였다. 그 결과 굳지 않은 콘크리트의 특성으로 유동성은 OPC에 비해 섬유를 혼입할 경우 저하하는 경향을 나타내었으나, 혼합 즉시는 PP섬유, 60분 경시변화까지도 고려하면 NY섬유에서 가장 우수한 것으로 나타났다. 공기량은 OPC와 유사한 경향을 나타내며, 섬유 혼입으로 인한 공기량의 변화는 크지 않았다. 경화 콘크리트의 특성으로 압축강도 및 휨강도는 Plain에 비하여 모든 재령에서 섬유를 혼입할 경우 증가하는 경향을 나타내었는데, 섬유 종류별로는 NY, PVA, PP, CL순이었다. 단, 인장강도에서는 NY 및 PP일 경우만 증가하는 경향이었다. 포로시미터에 의한 세공분포는 NY섬유를 혼입할 경우 섬유의 영향으로 $1{\mu}m$ 전후의 세공량이 많이 분포하여 누적 세공량이 커지는 경향을 나타내었다. 따라서 유동성 및 강도 등을 종합적으로 고려할 때, 이 연구의 실험 조건에서는 NY섬유 혼입 시 최상의 결과가 도출되는 것으로 분석되었다.

PP, NY섬유를 혼입한 150MPa 콘크리트의 고온역학적 특성 (Evaluation on High-Temperature Mechanical Properties of 150MPa Concrete Mixed with PP and NY Fiber)

  • 백재욱;김규용;윤민호;황의철;손민재;남정수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.5-6
    • /
    • 2017
  • Ultra high-strength concrete can prevent spalling by mixed ratio of PP and NY fiber. However, there is a lack of research on the deterioration of strength due to changes in mechanical properties after spalling prevention. In this study, the effect of high temperature on the mechanical properties of 150MPa concrete mixed with PP and NY fiber was evaluated. As a result, mixing PP and NY fiber is judge to be little effect on the mechanical properties of the 150MPa concrete at high temperature.

  • PDF

폭렬방지공법 변화에 따른 RC 기둥부재의 내화특성 (Fire Resistant Properties of the RC Columns Applying Various Splling Prevention Methods)

  • 한천구;배장춘;이종석;이찬영
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권3호통권55호
    • /
    • pp.119-126
    • /
    • 2009
  • 본 연구에서는 RC 기둥의 폭렬방지를 위하여 유기섬유의 혼입방식, 내화보드 부착방식, 스프레이 방식의 폭렬방지공법에 따른 내화특성을 검토하였는데, 그 결과를 요약하면 다음과 같다. 굳지않은 콘크리트의 특성으로, 유기섬유의 혼입율이 증가에 따른 유동성은 저하하는 것으로 나타났고, 섬유의 종류에 따라서는 NY섬유를 혼합한 경우 가장 양호하였다. 공기량은 NY섬유가 가장 적게 저하하였고, 그 다음으로 PVA, PP순이었다. 경화 콘크리트의 특성으로, 압축강도는 28일 재령에서 50MPa이상으로 섬유의 혼입율이 증가할 수록 약간 크게 나타났다. 내화시험후 폭렬특성으로, 유기섬유 혼입방식의 경우 PVA섬유를 제외한 PP섬유, NY 섬유는 혼입율 0.05%이상에서 폭렬이 발생하지 않는 것으로 나타났다. 스프레이 방식의 경우는 모든 마감재 부분에서 부분적인 폭렬이 발생하였을 뿐, 모재 콘크리트는 폭렬이 발생하지 않고 본래의 형상을 그대로 유지하는 것으로 나타났다. 또한, 보드방식의 경우는 보편적인 일반 건식공법인 경우를 제외한 건식공법 시공 후 내화페인트로 연결철물을 도포한 경우, 내화모르터로 차폐한 경우, 경량기포 콘크리트로 그라우트 한 경우는 모두 폭렬이 발생하지 않고 본래의 형상을 그대로 유지하고 있었다. 질량감소율은 플레인 콘크리트를 제외한 내화시공공법변화에 따라서 공히 8%미만으로 비교적 양호하게 나타났다.

나일론 및 셀룰로스 섬유 혼입률 변화가 콘크리트의 공학적 특성에 미치는 영향 (Effect of the Nylon and Cellulose Fiber Contents on the Mechanical Properties of the Concrete)

  • 한천구;한민철;신현섭
    • 한국건축시공학회지
    • /
    • 제7권3호
    • /
    • pp.83-90
    • /
    • 2007
  • This study is to investigate the effects of nylon(NY) and cellulose(CEL) fiber contents on the mechanical properties of the concrete. The results were summarized as following. Test showed that increase of NY and CEL fiber contents decreased fluidity of fresh concrete, so the loss of the fluidity would be considered when they were over added. Air contents were slight increased, but they satisfied the target air content. Bleeding capacity of concrete containing fiber significantly was declined. In addition, concrete containing higher amounts of fiber retarded setting time remarkably. Plastic shrinkage crack was reduced with the use of fiber due to increasing fiber contents and changing fiber classes, and NY fibers to prevent the plastic shrinkage crack effectively. Compressive and tensile strength of almost specimens were increased when air contents of the fresh concrete were fixed according to fiber contents, and flexural strength was increased according to fiber contents. For the impact strength of specimens, the specimen containing $0.6kg/m^3$ of NY fibers, showed the most favorable impact strength, The fiber reinforced concrete using NY fibers exhibited superior mechanical performance, and it was considered that $0.6kg/m^3$ of was desirable as the most favorable adding amount.

복합섬유(PP,NY)를 혼입한 설계강도 80MPa 3성분계 고강도콘크리트의 폭렬특성 (Spalling Properties of 80MPa High Strength Concrete with Fiber)

  • 김성덕;이범식;배기선;김상연;박수희
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.51-54
    • /
    • 2009
  • In this study, the fire resistance test was carried out with a parameter such as fiber(PP+NY) mixed ratio on high strength concrete with 80MPa, and the spalling resistance property was evaluated. Concrete material test was carried out with a parameter such as fiber(PP+NY) mixed ratio(0%, 0.05%, 0.1%, 0.2%) of high strength concrete with 80MPa. Although the flowability and the strength capacity were delicately decreased with a increase of fiber mixed ratio, they satisfied the target limits. As the spalling resistance property after the fire resistance test of 3 hours, the spalling was partly shown on the high strength concrete with fiber(PP+NY) mixed ratio of 0% but, wasn't shown on the high strength concrete with fiber(PP+NY) mixed ratio of 0.05% ~ 0.2%.

  • PDF

섬유의 종류 및 온도가열곡선 변화에 따른 콘크리트의 내화특성 (Fire Resistance of the Concrete Corresponding to the Various Fiber Contents and Heating Curves)

  • 한천구;배장춘
    • 한국건축시공학회지
    • /
    • 제8권5호
    • /
    • pp.101-107
    • /
    • 2008
  • This study investigated fundamental characters of the concrete according to various fiber types and contents and their properties of spatting resistance and residual compressive strength after fire test corresponding to ISO and RABT heating corves. The results were summarized as following. The Flowability was gradually declined as the increase of fiber contents, and it was the most favorable with nylon(NY) fibers. The decrease of air contents due to increasing fiber contents was in order by polypropylene(PP), polyvinyl alcohol(PVA) and NY fibers. The compressive strengths were over 40 MPa at 7 days and 50 MPa at 28 days. It was in order by PVA, PP and NY fibers. For the spatting properties, all specimens were prevented at ISO heating curve. In the other hand, the partial spatting at the surface occurred on the plain without fibers, but it was prevented over 0.10 % of PVA and 0.05 % of PP and NY fibers at the RABT heating curve.

3성분계 복합유기섬유 혼입율 변화에 따른 고강도 콘크리트의 내화특성 (Fire Resistance of the High Strength Concrete Depending on Ternary Blended Organic Fiber)

  • 박천진;한상윤;백대현;한민철;양성환;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.397-398
    • /
    • 2010
  • 본 연구는 PP, NY, CL의 유기섬유 조합비율 변화에 따른 고강도 콘크리트의 내화특성을 분석한 것으로, PP+NY+CL=0.02+0.01+0.02의 경우가 여타의 섬유 조합보다 내화특성이 우수한 것으로 나타나 최적조합비율인 것으로 판단된다.

  • PDF

복합섬유(PP, NY)를 혼입한 60, 80MPa 3성분계 고강도콘크리트의 내화특성 (Spalling Properties of 60, 80MPa High Strength Concrete with Fiber)

  • 김성덕;김상연;배기선;박수희;이범식
    • 한국건축시공학회지
    • /
    • 제10권4호
    • /
    • pp.3-9
    • /
    • 2010
  • 본 연구는 고강도콘크리트의 내화성능 증진에 효과적인 것으로 알려진 섬유(PP+NY) 혼입율 변화에 따른 60 MPa, 80 MPa 3성분계 고강도콘크리트의 유동성 및 강도특성을 검토하고 내화시험을 통해 폭렬현상을 확인하였다. 섬유(PP+NY) 혼입율을 0%, 0.05%, 0.1%, 0.2%로 산정하여 실험한 결과, 유동성 및 강도가 미세하지만 저하하는 것으로 나타났으나, 전반적으로 목표 범위를 만족하는 것으로 나타났다. 3시간 내화 후 폭렬특성으로 0%에서는 폭렬현상이 나타났지만, 0.05%이상에서는 표면에 미세한 균열만 발생하고 피복 탈락현상은 나타나지 않는 것으로 나타났다. 또한 폭렬이 발생되지 않은 공시체의 경우 잔존압축강도율이 5 ~ 6%로 나타났다. 이상 적은 양의 섬유(PP+NY)혼입율인 0.05%이상에서 폭렬현상이 방지되어 가장 양호한 것으로 판단된다.

섬유종류 변화에 따른 도로 포장용 린 콘크리트의 기초적 특성 (Fundamental Properties of Fiber Reinforced Lean Concrete for Pavements Depending on Various Types of Fiber)

  • 전규남;백대현;정우태;박종섭;한민철;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.265-266
    • /
    • 2010
  • 본 연구에서는 도로 포장용 린 콘크리트의 균열저감 목적에 여러 종류의 섬유를 접목하여 물성을 비교 분석한 것이다. 실험결과 NY섬유를 사용한 경우 우수한 형상비와 친수성에 기인하여 비비시간이 짧아 가장 양호한 결과를 나타내었다. 또한 휨강도의 경우는 PP섬유에서 가장 높은 강도값을 나타내어 가장 우수한 것으로 분석되었다.

  • PDF

나일론 섬유의 길이변화에 따른 섬유보강 바닥마감용 콘크리트의 공학적 특성 (Engineering characteristics of the Fiber Reinforced Floor Finishing Concrete According to the changes of Nylon Fiber Length)

  • 전규남;백대현;정우태;박종섭;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.153-156
    • /
    • 2009
  • This study investigated the fundamental properties corresponding to various length changes on NY fiber reinforced concrete. For results of fresh concrete, the slump and air content were declined, but the unit volume weight and vebe time were increased. For the hardened concrete properties, the compressive strength showed increasing tendency according to the NY fiber length. The dry and autogenous shrinkage also decreased compared with Plain. Generally, the caes that 19 mm NY fiber was used was better than any other cases.

  • PDF