• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.65-71
• /
• 2021

This study was carried out to investigate the effect of the final irrigation timing (FIT) before packaging for long-term transportation on growth, flowering, and crop quality of Phalaenopsis after simulated dark shipping (SDS). Phalaenopsis Sogo Yukidian 'V3' plants grown in 11 cm-diameter plastic pots filled with potting media (sphagnum moss + bark or only sphagnum moss) were packaged in paper boxes for export at 3.5, 7, 10 days (FIT 3.5, 7,10; Experiment 1) and 4, 6, 8, 10 days (FIT 4, 6, 8, 10; Experiment 2) after the final irrigation and then stored in a growth chamber at 20 ± 1℃ and 70 ± 3% RH created for SDS. After 4 weeks, the plants were taken out and grown in a greenhouse at 23 ± 3℃ and 70 ± 5% RH, and crop characteristics were measured during cultivation. In Experiment 1, the survival rate of FIT 3.5 plants was lower than that of FIT 7 and FIT 10. There was no difference between treatments in days to first flower, the number of florets, and the elongation rate of flower stalks. In Experiment 2, the percentage of rotted leaves was lowest in FIT 6 when before forcing and at 12 weeks after forcing, and that of FIT 8 was similar to FIT 6 when before forcing, but slightly increased after 12 weeks. The percentage of rotted leaves of FIT 10 was highest and that of FIT 4 was also high. There was little difference in flowering characteristics among treatments. In conclusion, the FIT before packaging for long-term (4 weeks) transportation of potted Phalaenopsis 'V3' affected the leaf rot rather than the post-shipping growth and flowering. And it was considered appropriate to set the volumetric water content of the potting media just before packaging to about 30%.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.1
• /
• pp.54-69
• /
• 2021

In 2020, civilized society's overall lifestyle showed a distinct change from consumable analog media, such as paper, to digital media with the increased penetration of cloud computing, and from wired media to wireless media. Based on these social changes, this work examines whether the use of computer media in the field of landscape architecture is appropriately applied. This study will give directions for new computer media classes in landscape architectural education in the 4th Industrial Revolution era. Landscape architecture is a field that directly proposes the realization of a positive lifestyle and the creation of a living environment and is closely connected with social change. However, there is no clear evidence that landscape architectural education is making any visible change, while the digital infrastructure of the 4th Industrial Revolution, such as Artificial Intelligence (AI), Big Data, autonomous vehicles, cloud networks, and the Internet of Things, is changing the contemporary society in terms of technology, culture, and economy among other aspects. Therefore, it is necessary to review the current state of the use of computer technology and media in landscape architectural education, and also to examine the alternative direction of the curriculum for the new digital era. First, the basis for discussion was made by studying the trends of computational design in modern landscape architecture. Next, the changes and current status of computer media classes in domestic and overseas landscape education were analyzed based on prior research and curriculum. As a result, the number and the types of computer media classes increased significantly between the study in 1994 and the current situation in 2020 in the foreign landscape department, whereas there were no obvious changes in the domestic landscape department. This shows that the domestic landscape education is passively coping with the changes in the digital era. Lastly, based on the discussions, this study examined alternatives to the new curriculum that landscape architecture department should pursue in a new degital world.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.68-76
• /
• 2021

Foodborne outbreaks frequently occur worldwide and result in huge economic losses. It is the therefore important to estimate the costs associated with foodborne diseases to minimize the economic damage. At the same time, it is difficult to accurately estimate the economic loss from foodborne disease due to a wide variety of cost components. In Korea, there are a limited number of analytical studies attempting to estimate such costs. In this study we investigated the components of economic cost used in foreign countries to better estimate the cost of foodborne disease in Korea. Seven recent studies investigated the cost components used to estimate the cost of foodborne disease in humans. This study categorized the economic loss into four types of cost: direct costs, indirect costs, food business costs, and government administration costs. The healthcare costs most often included were medical (outpatient) and hospital costs (inpatient). However, these cost components should be selected according to the systems and budgets of medical services by country. For non-healthcare costs, several other studies considered transportation costs to the hospital as an exception to the cost of inpatient care. So, further discussion is needed on whether to consider inpatient care costs. Among the indirect costs, premature mortality, lost productivity, lost leisure time, and lost quality of life/pain, grief and suffering costs were considered, but the opportunity costs for hospital visits were not considered in any of the above studies. As with healthcare costs, government administration costs should also be considered appropriate cost components due to the difference in government budget systems, for example. Our findings will provide fundamental information for economic analysis associated with foodborne diseases to improve food safety policy in Korea.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.264-271
• /
• 2021

In this paper, we intended to find the labor situations and labor rights consciousness of local juveniles and also to identify how they are treated and respond to those treatments they encounter. At the same time, another purpose of this research is to collect basic data to give the youth proper education about labor rights when they are faced with unfair labor practice. The research results are as follows: First, 262 students (50.5%) have work experience. Second, 133 students(24.9%) took the education about labor rights, which means relatively small number of students were educated about labor rights. Third, it is reported that 54.2% of those students considered 'payment' top priority, and 67.7% of them got the work through their parents, friends, and acquaintances, and 60.2% had their jobs at restaurants. Average working hours are 7 hours a day and 20 hours a week, which shows that they worked quite long hours. Fourth, 28.9% of respondents reported they wrote employment contracts, and 82.1% said their main purpose of work was 'to make money'. Fifth, 24.7% of the students reported the experience of unfair treatment while working, and the most common case was 'jobs other than expected work'(17.9%). When they were asked how they coped with the unfair treatments, the largest percentage(30.3%) of them answered they 'quit the job'. Last, when the respondants were asked to list improvements for juvenile part-time jobs, the answers were minimum wage and payment with weekly vacation allowance(25.1%), enhancing social awareness(14.3%), increasing good job opportunity(12.8%), and etc.. This demonstrates that social awareness of juvenile labor jobs is to improve urgently in local community.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2021

This study was conducted to examine the changes of photosynthesis, growth, chlorophyll contents and functional material contents in light intensity and EC concentration of wild baby leaf vegetable, Indian lettuce (Lactuca indica L. cv. 'Sunhyang') in DFT hydroponics. The cultivation environment was 25±1℃ of temperature and 60±5% of relative humidity in growth system. At 14 days after sowing, combination effect of light intensity (Photosynthetic Photon Flux Density (PPFD 100, 250, 500 µmol·m-2·s-1) and EC level (EC 0.8, 1.4, 2.0 dS·m-1) of nutrient solution was determined at the baby leaf stage. The photosynthesis rate, stomatal conductance, transpiration rate and water use efficiency of Indian lettuce increased as the light intensity increased. The photosynthesis rate and water use efficiency were highest in PPFD 500-EC 1.4 and PPFD 500-EC 2.0 treatment. The chlorophyll content decreased as the light intensity increased, but chlorophyll a/b ratio increased. Leaf water content and specific leaf area decreased as light intensity increased and a negative correlation (p < 0.001) was recognized. Plant height was the longest in PPFD 100-EC 0.8 and leaf number, fresh weight and dry weight were the highest in PPFD 500-EC 2.0. Anthocyanin and total phenolic compounds were the highest in PPFD 500-EC 1.4 and 2.0 treatment, and antioxidant scavenging ability (DPPH) was high in PPFD 250 and 500 treatments. Considering the growth and functional material contents, the proper light intensity and EC level for hydroponic cultivation of Indian lettuce is PPFD 500-EC 2.0, and PPFD 100 and 250, which are low light conditions, EC 0.8 is suitable for growth.

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.211-217
• /
• 2020

This study evaluated calcium hydroxide (slaked lime) and a combination of plant extracts ('natural product'; clove, cinnamon, and saponin; 1:1:1 ratio) as acaricidal control mechanisms for poultry red mites. Red mite susceptibility was evaluated after treatments with 10% slaked lime, 20% slaked lime, and 1% natural product. The duration of the acaricidal effect was also tested at 0, 10, 30, and 60 min after treatment using 20% slaked lime, 1% natural product, or a mixture of both. In the in vitro experiment, the slaked lime treatments were 73.2% (10% slaked lime) and 85.1% (20% slaked lime) effective on red mites. In acaricidal effect of control materials over times, with 20% slaked lime, the acaricidal effect decreased to 50.7% after 30 min, and 12.7% after 60 min (P<0.05). With 1% natural product, there was no acaricidal effect after 30 min (P<0.05). With 20% slaked lime +1% natural product, all of poultry red mites died until 30 min, and 92.9% after 60 min (P<0.05). On the farm, poultry red mites were observed that the number of poultry red mites increased 7,923 from 36 to 45 weeks, but then decreased to 483 after 20% slaked lime plus 1% natural product treatment. These results indicate that combining slaked lime and plant extracts effectively control poultry red mites.

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.267-274
• /
• 2020

This study was conducted to estimate genetic parameters for growth and egg production traits in Black Korean native chicken (L strain) and Korean White Leghorn (F, K strains) using a multi-traits animal model BLUP. Traits used for this study were body weight at 150 days (BW150) and 270 days (BW270), age at first egg (DAY1st), egg weight at first egg (EW1st) and 270 days (EW270), and number of eggs laid by 270 days (EP270), and included 68,688 pedigree and 123,905 performance records collected from 2001 to 2013. In L, F, K strains, heritability estimates of BW150 were high (0.48, 0.52 and 0.50, respectively); of BW270 were high (0.56, 0.57 and 0.56); of DAY1st were medium to high (0.45, 0.39 and 0.31); of EW1st were low (0.15, 0.16 and 0.15); of EW270 were high (0.58, 0.55 and 0.59) and of EP270 were moderate (0.22, 0.21 and 0.20). The genetic and phenotypic correlation of DAY1st with EP270 were highly negative (-0.73 to -0.63 and -0.48 to -0.42). The genetic and phenotypic correlation of EP270 with BW150 and BW270, respectively were low negative (-0.16 to 0.01 and -0.14 to -0.03) and low to moderate positive (-0.08 to 0.07 and -0.13 to 0.04). The genetic and phenotypic correlation of EW270 with BW150 and BW270, respectively were moderate to high positive (0.39 to 0.49 and 0.36 to 0.46) and (0.29 to 0.33 and 0.34 to 0.37). The study showed that there is a potential for genetic improvement of Korean Indigenous chicken through selection program.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.151-176
• /
• 2021

As the information technology industry develops, various kinds of data are being created, and it is now essential to process them and use them in the industry. Analyzing and utilizing various digital data collected online and offline is a necessary process to provide an appropriate experience for customers in the industry. In order to create new businesses, products, and services, it is essential to use customer data collected in various ways to deeply understand potential customers' needs and analyze behavior patterns to capture hidden signals of desire. However, it is true that research using data analysis and UX methodology, which should be conducted in parallel for effective service development, is being conducted separately and that there is a lack of examples of use in the industry. In thiswork, we construct a single process by applying data analysis methods and UX methodologies. This study is important in that it is highly likely to be used because it applies methodologies that are actively used in practice. We conducted a survey on the topic to identify and cluster the associations between factors to establish customer classification and target customers. The research methods are as follows. First, we first conduct a factor, regression analysis to determine the association between factors in the happiness data survey. Groups are grouped according to the survey results and identify the relationship between 34 questions of psychological stability, family life, relational satisfaction, health, economic satisfaction, work satisfaction, daily life satisfaction, and residential environment satisfaction. Second, we classify clusters based on factors affecting happiness and extract the optimal number of clusters. Based on the results, we cross-analyzed the characteristics of each cluster. Third, forservice definition, analysis was conducted by correlating with keywords related to happiness. We leverage keyword analysis of the thumb trend to derive ideas based on the interest and associations of the keyword. We also collected approximately 11,000 news articles based on the top three keywords that are highly related to happiness, then derived issues between keywords through text mining analysis in SAS, and utilized them in defining services after ideas were conceived. Fourth, based on the characteristics identified through data analysis, we selected segmentation and targetingappropriate for service discovery. To this end, the characteristics of the factors were grouped and selected into four groups, and the profile was drawn up and the main target customers were selected. Fifth, based on the characteristics of the main target customers, interviewers were selected and the In-depthinterviews were conducted to discover the causes of happiness, causes of unhappiness, and needs for services. Sixth, we derive customer behavior patterns based on segment results and detailed interviews, and specify the objectives associated with the characteristics. Seventh, a typical persona using qualitative surveys and a persona using data were produced to analyze each characteristic and pros and cons by comparing the two personas. Existing market segmentation classifies customers based on purchasing factors, and UX methodology measures users' behavior variables to establish criteria and redefine users' classification. Utilizing these segment classification methods, applying the process of producinguser classification and persona in UX methodology will be able to utilize them as more accurate customer classification schemes. The significance of this study is summarized in two ways: First, the idea of using data to create a variety of services was linked to the UX methodology used to plan IT services by applying it in the hot topic era. Second, we further enhance user classification by applying segment analysis methods that are not currently used well in UX methodologies. To provide a consistent experience in creating a single service, from large to small, it is necessary to define customers with common goals. To this end, it is necessary to derive persona and persuade various stakeholders. Under these circumstances, designing a consistent experience from beginning to end, through fast and concrete user descriptions, would be a very effective way to produce a successful service.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.331-338
• /
• 2020

This study was conducted to cultivate new Lepista nuda varieties with shorter cultivation period and better fruiting body compared to that of wild strains, for mass production and commercial application. Eighteen genetic resources of L. nuda were collected and grown in boxes using rice straw-fermented growth medium. Four lines with fruiting bodies were formed and selected as cross-breeding lines. Although 657 combinations were crossed through monospore crossing, only 17 combinations were bred between the 'CBMLN-19' line and the 'CBMLN-30' line. Among them, 8 lines with fast mycelial growth and high density were selected. After inoculating the rice straw-fermented growth medium with 14 genetic resources and 8 cross-breeding lines, their incubation period was investigated. Six of the cross-breeding lines completed their incubation in 20 days, while 7 of the 14 genetic resources took more than 40 days to complete their incubation, reducing the incubation period by more than 20 days in most cross-breeding lines. After the incubations were completed, the clay loam soil was covered with for post-cultivation, and when the mycelial cultivation was complete, the formation of fruiting bodies was induced after scraping the mycelial bodies under these environmental conditions: 14℃, 95% relative humidity or higher, and 1,500 to 2,000 ppm CO2 concentration. The temperature was reduced to 6℃ at night, resulting in a low temperature shock. Thus, 4 lines of fruiting bodies occurred from two genetic resources 'CBMLN-31' and 'CBMLN-44' and two cross-bred lines 'CBMLN-96' and 'CBMLN-103'. After inoculation, the longest period for fruiting bodies to occur was 100 days for the control:, the genetic resource 'CBMLN-31', and the shortest period (45 days) was observed for the cross-breeding line 'CBMLN-103'. The result of the investigation of the fruiting body characteristics shows that the cross-bred line 'CBMLN-103' showed a small form with 1.9 g of individual weight and 123validstipes per box, which was the highest incidence among the four lines. Another cross-bred line, 'CBMLN-96', had an individual weight of 5.5 g, which is larger than that of 'CBMLN-103'; however, the number of valid stipes per box was 30 less than that of 'CBMLN-103'. Quantity analysis showed that the control, 'CBMLN-31', had the highest quantity of 783 g per box, followed by the cross-bred line, 'CBMLN-96' with 165 g per box, and then the 'CBMLN-103' with 232 g. The quantity of the two crossbred lines was lower than that of the control 'CBMLN-31'; however, the amount of fruiting bodies was higher, and the cultivation period was shortened by 32 to 33 days. Therefore, these two lines would be selected as superior lines.