• Journal of Animal Environmental Science
• /
• v.15 no.1
• /
• pp.51-58
• /
• 2009

The compost leachate was dark-colored solution that leaches out of the bottom of the compost pile. The compost leachate was rich in nutrients and can potentially used in plant culture. In the organic production, commercial liquid fertilizer was used to insure the availability of nutrients during the formation of the yield. The cost of supplemental liquid fertilizer could be reduced by developing a fertilizer based on animal fertilizer. This experiment was conducted to investigate the effect of different combination of compost leachate and conventional inorganic solution in hydroponic culture for lettuce growth. Six different treatments were applied. The compost leachate(CL) and nutrient solution(NS) were mixed by six different mixing ratios of 0:100, 20:80, 40:60, 60:40%, 80:20 and 100%:0% based on nitrogen content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of leaf lettuce. The concentration of nutrient solution was adjusted 1.5 mS/cm in EC. The compost leachate was low in phosphorus(P), calcium(Ca), magnesium(Mg), but rich in potassium(K). The plant height of lettuce treated with CL 20+NS 80% was similar with 100% NS of control plot. Plant height was highest in the plot of CL 20+NS 80%. The treatment of 100% compost leachate was lowest in the growth characteristics of leaf lettuce. Number of leaf was very low in 100% compost leachate compared with plot of chemical nutrient solution. In the beginning of growth stage, SPAD value was reduced in plot treated with CL100%, but CL20+NS80% plot was higher compared to 100% compost leachate. SPAD value of leaf lettuce leaves was decreased as the amount of CL was increased. The dry weight of lettuce were 107.4, 104.2g in plot of NS 100% and CL 20%+NS80%, respectively. The leaf number and plant weight were decreased at high application plots of compost leachate. The leaf lettuce showed lowest in the plot treated with 100% compost leachate, and the growth of lettuce severely decreased after application of 100% CL treatment. The results showed that compost leachate can be use as liquid fertilizer for the organic hydroponic production. The mixture solution of 20% of compost leachate and 80% of nutrient solution could be used as a nutrition solution in hydroponic culture of leaf lettuce. Our studies have shown that is possible to produce using compost leachate, although growth is slower than when using a conventional inorganic hydroponic solution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.75-82
• /
• 2007

This paper proposes the way that reduces power consumption of the IEEE 802.15.4-based sensor network. To reduce power consumption, we consider following two schemes; first scheme is the Adaptive Beacon Interval Control. The next is the Adaptive Superframe Duration Control. Our results show that these guarantee reducing power consumption in ns-2 simulator.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1551-1564
• /
• 2016

The high penetration level of inverter-based distributed generation (DG) power plants is challenging the low-voltage ride-through requirements, especially under unbalanced voltage sags. Recently, a flexible injection of both positive- (PS) and negative-sequence (NS) reactive currents has been suggested for the next generation of grid codes. This can enhance the ancillary services for voltage support at the point of common coupling (PCC). In light of this, considering distant grid faults that occur in a mainly inductive grid, this paper proposes a complete voltage support control scheme for the interface inverters of medium or high-rated DG power plants. The first contribution is the development of a reactive current reference generator combining PS and NS, with a feature to increase the PS voltage and simultaneously decrease the NS voltage, to mitigate voltage imbalance. The second contribution is the design of a voltage support control loop with two flexible PCC voltage set points, which can ensure continuous operation within the limits required in grid codes. In addition, a current saturation strategy is also considered for deep voltage sags to avoid overcurrent protection. Finally, simulation and experimental results are presented to validate the effectiveness of the proposed control scheme.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.130-134
• /
• 1995

A small signal gain coefficient of Nd:glass was measured and a cavity-dumped laser was constructed. To measure the small signal gain coefficient, we constructed a resonator consisting of Nd:glass, Pockels cell, polarizing beam splitter. The measured small signal gain coefficient was $0.088 cm_{-1}$ when the input energy was 100 J and the round-trip internal loss of the resonator was 56%. The cavity-dumped laser was constructed using Nd:glass. 2 m radius of curvature HR-mirrors, Pockels cell, polarizinig beam splitter and $\lambda/4$ plate. The output energy of cavity-dumped laser was 0.85 J at 140 J input energy and the laser pulse width was 8 ns.s 8 ns.

• Advances in concrete construction
• /
• v.8 no.4
• /
• pp.321-333
• /
• 2019

The present study targets to access the consequence of utilization of coarse aggregates retrieved from waste concrete as a substitution of coarse fraction of natural aggregates and silica nano-particles as partial substitution of cement using principles of factorial design. Furthermore, procedures of design of experiments are employed to examine the effect of use of recycled aggregates and nano-silica. In this investigation, compressive strength found after at 7, 28, 90 and 365 days, split and flexural tensile strength, ultrasonic pulse velocity and rebound number and are chosen as responses, whereas the percentages of recycled coarse aggregates (RCA%) and nano-silica (NS(%)) are selected as factors. Analysis of Variance has been conducted on the experimental results for the selected responses with consideration the both factors, which indicates that RCA (%) and NS (%) have substantial impact on the various responses. However, the present analysis depicts that interaction between factors has considerable effect on the chosen parameters of concrete. Furthermore, validation experiments are carried to validate these models for compressive and tensile strength for 100% RCA and 1% NS. The results of comparative study indicates that that the error of the estimation determined using the relevant models are found to be small (±5%) in comparison with the analogous experimental results, which authenticates the calculated models.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.265-270
• /
• 2013

Strength design for a lightweight bicycle frame made of carbon/epoxy composite laminates was studied using Tsai-Wu's failure criterion. For the design of bicycle frames, reducing the weight of the frame is of great importance. Furthermore, the frame should satisfy the required strength under specific loading cases. In accordance with the European EN 14764 standard for bicycle frames, three loading cases-pedaling, vertical, and level loadings-were investigated in this study. Because of the anisotropic characteristics of composite materials, it is important to decide the appropriate stacking sequence and the number of layers to be used in the composite bicycle frame. From finite element analysis results, the most suitable stacking sequence of the fiber orientation and the number of layers were determined. The stacking sequences of $[0]_{8n}$, $[90]_{8n}$, $[0/90]_{2ns}$, $[{\pm}45]_{2ns}$, $[0/{\pm}45/90]_{ns}$ (n = 1, 2, 3, 4) were used in the analysis. The results indicated that the $[0/{\pm}45/90]_{3s}$ lay-up model was suitable for a composite bicycle frame. Furthermore, the weakest point and layer were investigated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.529-538
• /
• 2007

In this paper, we have analyzed a simulation model of Slammer worm propagation process which caused serious disruptions on the Internet in the year of 2003 by using NS-2. Previously we had presented and analyzed Abstract Network to Abstract Network(AN-AN) model being modified from the Detailed Network to Abstract Network(DN-AN) of NS-2. However, packet analysis in AN-AN model had a problem of taking 240 hours to simulate the initial 300 seconds of infection. We have reduced the AN-AN model to save the simulation time and analyzed total 3.5 hours of the network congestions within 107 hours. Moreover, we have derived optimal quarantine rate of 0.0022 considering service outage of network devices caused by the heavy infected traffics, which was not taken into consideration in previous works. As the result of simulation, Although the inbound traffic at the Korean international gateway was back in normal conditions at 4,787 second, due to the revese direction saturation was maintained until 12,600 seconds, the service outage was persisted for 3.5 hours.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.118-118
• /
• 2003

The aim of this study was to investigate the effect of glucose on embryonic development of mouse embryos. Two cell embryos were recovered from ICR female mice(3-4weeks) at 46~50 hrs after hCG 5 IU injection (mated just after hCG injection) and cultured in 50 $\mu m$ DMEM droplets supplemented with nothing (control: n=46), glucose 0.5mM (Group A; n=46) or glucose 3.15 mM(Group B; n=46) under mineral oil. All experimental media were supplemented with 20% human follicular fluid. Total blastocyst formation rates was lower (NS) in glucose groups (group A: 52.2% : B. 47.8%) than control group (60.9%). ZiB rates was the highest (P<0.05) in control (47.8%) than those in group A (21.7%) and B (28.3%). ZeB rates were the highest (NS) in group A (30.4%) than those in control (13.0%) and group B (19.6%). Blastocysts, cultured in group B (50.5), had the highest (NS) mean cell number compared with the others (control: 39.2 ; group A: (45.6). The ICM proportion (% ICM of total cells) in blastocysts cultured in group A (20.6%) was the highest (NS) than those of other tested groups (control: 15.2 ; group B: 13.9%). This study shows that a low dose of glucose added to culture medium increases the ICM proportion of blastocysts in mice.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.484-491
• /
• 2008

In this paper, we design and fabricate the L-band high speed pulsed HPA using LDMOS FET. And we propose the high voltage and high speed switching circuit for LDMOS FET. The pulsed HPA using LDMOS FET is simpler than using GaAs FET because it has a high gain, high output power and sin81e voltage supply. LDMOS FET is suitable for pulsed HPA using switching method because it has $2{\sim}3$ times higher maximum drain-source voltage(65 V) than operating drain-source voltage($V_{ds}=26{\sim}28\;V$). As results of test, the output peak power is 100 W at 1.2 GHz, the rise/fall time of output RF pulse are 28.1 ns/26.6 ns at 2 us pulse width with 40 kHz PRF, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.415-421
• /
• 2013

This study describes the aerodynamic design procedure for the axial turbines of a small heavy-duty gas turbine engine being developed by Doosan Heavy Industries. The design procedure mainly consists of three parts: namely, flowpath design, airfoil design, and 3D performance calculation. To design the optimized flowpath, through-flow calculations as well as the loss estimation are widely used to evaluate the effect of geometric variables, for example, shape of meridional plane, mean radius, blades axial gap, and hade angle. During the airfoil design procedure, the optimum number of blades is calculated by empirical correlations based on the in/outlet flow angles, and then 2D airfoil planar sections are designed carefully, followed by 2D B2B NS calculations. The designed planar sections are stacked along the spanwise direction, leading to a 3D surfaced airfoil shape. To consider the 3D effect on turbine performance, 3D multistage Euler calculation, single row, and multistage NS calculations are performed.