• 제목/요약/키워드: NOx distribution

검색결과 197건 처리시간 0.03초

Bluff-Body형상이 연료액적크기와 화염온도에 미치는 영향 (The Effect of Bluff-Body Shapes on the Drop Size and Flame Temperature)

  • 황상호;차건종;김덕줄
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.937-942
    • /
    • 2000
  • The characteristics of spray combustion and dropsize of spray through twin-fluid atomizer was experimentally investigated. The distribution of flame temperature have an effect on the generation of NOx. To investigate there effects, flame temperature with different spray shape was observed. The spray shape was varied by various bluff-bodys. Mean temperature were measured by thermocouple respectively, and NOx concentration was measure by NOx analyser. Distribution of droplet sizes were measured by PMAS. The result showed that the flame with wide distribution has lower temperature and lower NOx emission compared with narrow.

  • PDF

대향분출화염의 분산화학반응 화염구조와 NOx 저감기구 (Flame Structure of Moderately Turbulent Combustion in the Opposed Impinging Jet Combustor)

  • 손민호;조용진;윤영빈;이창진
    • 대한기계학회논문집B
    • /
    • 제26권10호
    • /
    • pp.1387-1393
    • /
    • 2002
  • The measurement of velocity and stain rate field has been conducted in opposed impinging jet combustion. When a smaller diameter (5mm) orifice of pre-chamber was used, previous studies had reported that the combustion phase showed a shift from weak turbulent combustion to moderate turbulent combustion in the modified Borghi Diagram. In the case with smaller orifice diameter (5mm), NOx emission was substantially reduced by a factor 1/2 while the combustion pressure remains at the same as that in the conventional combustion. Hence, in this study, the experiment setup using PIV technique was designed to identify the relation of the strain rate distribution and NOx reduction associated with moderate turbulent combustion. As a result, it was found that the highly strained pockets are widely distributed during the combustion in the middle of chamber when the orifice diameter is 5mm. And the corresponding PDF distribution of strain rates she was the smoothly distributed strain .ate within the range of |$\pm$1000| (1/sec) rather than a spike shape about zero point. This is the unique feature observed in the combustion with 5mm orifice diameter. Therefore, it can be concluded that the substantial NOx reduction in opposed impinging combustor is mainly attributed to the strain rate distribution within the range of |$\pm$1000|resulting in the combustion phase shift to moderate turbulent combustion.

Off-cycle에서 Euro 6a 및 6b 규제 만족 디젤 자동차의 NOx 배출 특성 (NOx Emission Characteristics of Diesel Passenger Cars Met Euro 6a and 6b Regulations on Off-cycles)

  • 김성우;임재혁;김기호
    • 동력기계공학회지
    • /
    • 제21권6호
    • /
    • pp.68-78
    • /
    • 2017
  • Major countries have tighten their NOx regulation of diesel passenger cars. In the case of the EU, the regulation has been toughen up to 6.25 times since 2000. Despite the regulation the NOx concentration of the ambient has not been reduced proportionally. Futhermore, some manufacturers were disclosed using a defeat device for meeting the regulation illegally. As these issues, to reduce NOx emission practically, Korea and the EU introduced the real-world driving emission(RDE) regulation and the test method that will be applied after 2017. Also, the US has used the test equipment(PEMS) to detect a defeat device. In this paper, for the regulation to make a soft landing in Korea, 4 diesel passenger cars which met Euro 6a~6b regulation and were equipped with LNT/SCR were tested at a chassis dynamometer with environmental chamber applying the off-cycles(FTP, US06, SC03, HWFET and CADC) and several ambient condition(-7 and $14^{\circ}C$) as well as certification mode(NEDC, WLTC@ $23^{\circ}C$). The result of the test showed that the ambient temp. and the engine load as a test mode impacted the NOx emission of the cars while the vehicles with SCR emitted NOx lower than with LNT. Additionally, to propose an effective RDE test method, the above result was compared with the results of the other papers which tested RDE using the same cars.

SCR 촉매 일체형 덕트 버너 개발에 대한 IoT 기초연구 (IoT Basic Study on Development of Duct Burner Integrated with SCR Catalyst)

  • 장성철;심요섭
    • 사물인터넷융복합논문지
    • /
    • 제7권3호
    • /
    • pp.75-80
    • /
    • 2021
  • NOx의 배출저감 방법으로 선박용 디젤엔진의 최적화만으로는 배기가스의 NOx 배출량 제한을 만족시킬 수 없기 때문에 반드시 배기가스를 후처리하여 NOx를 저감할 수 있는 방안이 요구된다. 본 연구에서는 현재 개발 중에 있는 선박용 SCR 촉매 유닛 일체형 덕트용 오일 버너 시스템에서 요소수를 NH3로 효과적으로 변환하기 위한 이류체 노즐과 믹싱 챔버 덕트에 관한 설계 타당성 여부를 속도분포 및 온도분포에 대한 전산열유동 해석을 통해 검토하고자 한다.

산업 보일러용 오일버너에서의 저 NOx 연소 연구 (A Study on Low-NOx Combustion in an Oil Burner for an Industrial Boiler)

  • 신명철;김세원;박주원;방병열;양원;고영건
    • 한국연소학회지
    • /
    • 제14권1호
    • /
    • pp.19-24
    • /
    • 2009
  • A novel low NOx oil burner of 0.7 MW (for a 1 ton steam/hr industrial boiler) was designed and tested to investigate the combustion characteristics through in-flame measurement and flue gas analysis. Flame shape was observed by CCD camera and $CH^*/{C_2}^*$ radical distribution in the flame were observed, along with measurement of flue gas composition such as NOx and CO, for various heat inputs, excess airs and pressure of the fuel spary nozzles. The flame showed the two-zone structure: fuel-rich and fuel-lean zone, which was very favorable for the low-NOx combustion, and the NOx emission for haevy oil combustion was significantly reduced to < 150 ppm at 4 % $O_2$, compared with the NOx level of a conventional heavy oil burner.

  • PDF

UREA의 함량 변화에 따른 배출가스 특성분석 (A study on Property of Emission Gas by the Content Variation of Urea)

  • 강형규;도진우;황인하;임재혁;하종한;나병기
    • 에너지공학
    • /
    • 제24권4호
    • /
    • pp.24-32
    • /
    • 2015
  • 국내외적으로 디젤엔진에 대한 배출가스 규제가 강화되고 있고 다양한 방식의 엔진연소 및 후처리 시스템에 대한 연구가 진행되고 있다. 질소산화물(NOx)의 제거방법으로는 HC-SCR, LNT, Urea-SCR 등이 있으며, Urea-SCR은 높은 변환 효율 및 연비특성으로 향후 NOx의 저감을 위한 유력한 기술로 많은 기술개발이 진행되고 있다. 본 연구에서는 요소함량의 변화에 따른 요소수의 물리적/화학적 특성을 조사하고 배출가스의 특성을 분석하였다. 요소함량의 증가에 따른 요소수의 뷰렛, 알데히드, 인산염 함량은 증가하였으며, 배출가스 중 일산화탄소(CO), 탄화수소(HC) 및 입자상물질(PM)의 배출량 변화는 미미하였다. 질소산화물(NOx)의 배출량은 요소함량이 증가함에 따라 감소하였으며, 30.0 wt%이상의 요소수에서는 질소산화물의 저감효율이 80 %이상을 나타내었다.

동축확산연소기 화염구조와 NOx 분포에 관한 연구 (A Study on the Flame Structure and NOx Distribution In Coaxial Diffusion Combustor)

  • 김규성;이우섭;강인구;이도형
    • 한국연소학회지
    • /
    • 제4권2호
    • /
    • pp.35-41
    • /
    • 1999
  • The purpose of this study is to establish the flame structure and NOx emission characteristics of the swirl flow coaxial diffusion combustion in the model gas turbine combustor. The mean temperature, ion currents and NOx emission measurement technique showed the effect of equivalence ratio into flame length and flame stability. As a result of this study, NOx emission was increased by increasing the equivalence ratio, and the peak value of the NOx was appeared near the flame front.

  • PDF

희박한 당량비 구간에서 이중 선회버너의 배출특성 연구 (Emission studies of a dual swirl burner in the region of lean equivalence ratios)

  • 박태준;이기만
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.111-112
    • /
    • 2013
  • An experimental study of a dual swirl burner was conducted to analyze NOx emission in the lean conditions. The dual swirl burner is composed of a combination of swirling jet premixed(main section) and diffusion flames(pilot section). It was operated with a co-swirling configuration and overall equivalence ratios between 0.6 and 0.8. The purpose of this study is to analyze experimentally the characterization of flame temperature and NOx concentration in reacting zone and to supply the useful experimental data for numerical simulations. The measurements of temperature and NOx concentration were captured using a thin digitally-compensated thermocouple and a sampling quartz probe with quenching effect of sudden expansion, and were measured by the NOx analyzer of chemiluminescence method. We could analyse the NOx emission characteristics comparing the temperature distributions in the lean equivalence ratios.

  • PDF

이중 콘형 부분 예혼합 GT 노즐의 다단 연소특성 (Characteristics of Multi staged Combustion on a Double-cone Partial Premixed Nozzle)

  • 김한석;조주형;김민국;황정재;이원준
    • 한국가스학회지
    • /
    • 제24권1호
    • /
    • pp.49-55
    • /
    • 2020
  • 산업용 혹은 발전용 가스터빈에 사용되는 이중 콘형 예혼합 연소기의 다단 연소 특성을 이해하기 위하여 실험적연구를 수행하였다. 이를 위하여 기존에 모두 경사면에 공급되는 연료를 콘부분으로 일부 할애하는 방식으로 다단연소 방식을 구성하였으며 콘에서 분사되는 연료공급은 축방향과 콘 경사면 방향으로 하였다. 다단연소 연소특성을 이해하기 위하여 콘에서의 연료 분사 방향과 연료 분배율 변화에 대한 NOx와 CO의 배출 농도 그리고 벽면 온도분포를 측정하였다. 그 결과 총 연료에 대한 콘으로의 분배율이 3%인 경우 콘에서의 연료 분사방향에 관계없이 노즐내의 예혼합 영역에서 연료가 공기와 균일하게 혼합됨으로서 연소영역의 고온점 감소에 의하여 NOx 배출 농도가 감소된다. 그러나 콘에서 축방향으로 분사되는 연료분배율이 8%로 증가하는 경우 노즐 내부 예혼합 영역으로의 화염 역화로 인하여 NOx의 배출농도가 오히려 증가하게 된다.

연소실 압력변동을 이용한 저 NOx 연소의 새로운 접근 (New Approach to Low NOx Combustion by Changing Combustor Pressure)

  • 김종률;최경민;김덕줄
    • 대한기계학회논문집B
    • /
    • 제29권10호
    • /
    • pp.1148-1155
    • /
    • 2005
  • In this study, the influence of changing combustor pressure on nitric oxide emission was investigated. Expansion of reaction region was more clear in the P$^{*}$ <1 conditions compared to the P$^{*}\geq1$ conditions, and it could be observed that flames are distinct in the P$^{*}\geq1$ conditions and that brightness is relative low and wide distribution is shown in the P$^{*}$ <1 conditions. In the respect of temperature distribution, narrow and high-temperature region was shown in the P$^{*}\geq1$ conditions. On the other hands, overall uniform temperature distributions were shown in the P$^{*}$ <1 conditions. Nitric oxide emission decreased with decreasing combustor pressure. This tendency was explained by the mean flame temperature distribution. Low NOx combustion is ascribed to wide-spread reaction region in the low combustor Pressure and oscillation were shown P$^{*}\leq0.97$, and strength and sizes of oscillation were more increased with lower pressure index. These results demonstrate that flame shape and nitric oxide emission can be controlled with changing combustor pressure.