• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.121-127
• /
• 2014

The functionality of BNWAS and its operations are investigated through its international standard. But the BNWAS is being used currently in the ship had difficulty in monitoring. Several kinds of data are generated from many equipments in BNWAS, such as NMEA-0183 data or NMEA-2000. In this paper, we have proposed a method of the multimedia data transmission using a communication protocol based on slower NMEA-0183, which is mainly used in BNWAS. Data compression techniques are needed for smooth streaming services of the multimedia data in the low data rate over the NMEA-0183 interface. Although these data are mainly used for the instruments of ship, their efficient transmission may be needed if they are managed to control the BNWAS equipment with sensors.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.405-411
• /
• 2017

As the number of sensors in a ship has increased, studies have been actively conducted to efficiently manage a large amount of data. Sensors in a ship follow the NMEA (National Marine Electronics Association) data format. In particular, NMEA0183 standardized as IEC 61162-1 and NMEA2000 standardized as IEC 61162-3 are widely used. NMEA0183 is a protocol based on serial communication and NMEA2000 is a protocol based on CAN (Controller Area Network) communication. We implemented a gateway that receives data from NMEA0183 sensors and NMEA2000 sensors and then transmits them to the server on TCP/IP network. By using the NMEA2000 0183/2000 gateway to receive the sensor data and manage it through the ship's preventive maintenance system, the sensor data can be utilized efficiently and promptly. This management can reduce crew's daily tasks and reduce the number of accidents.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.421-423
• /
• 2010

This paper is the study of NMEA-0183 based BNWAS. The BNWAS is being used currently in the ship had difficulty in monitoring. NMEA-0183 based BNWAS equipment will work with existing equipment. The monitoring of attendant risks and the effective emergency response can be. All subsequent nmea-based equipment integration can be developed into a system that can manage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.185-187
• /
• 2011

최근 선박 및 물류 자동화는 물류 증대와 함께 선박의 운용을 더욱 복잡하게 만들고 있으며, 선박 내부의 통신 장비 및 통신 시스템의 구성 또한 매우 복잡하게 구성되어 있다. 때문에 지금 현재의 통신장비의 내부 통신 프로토콜은 일반적인 RS-422,485 기반의 NMEA-0183과 CAN 통신 기반의 NMEA-2000 기반으로 해상전자장비의 인터페이스 표준으로 법제화 되어있다. 본 논문에서는 가장 일반적인 NMEA-0183 프로토콜을 7-체널의 NMEA-0183 시리얼 통신 데이터를 지원하도록 설계하였으며, 그 외에 SPI 방식의 3-체널 16비트 ADC(Analog Digital Converter)와 SPI 방식의 2-체널 펄스(pulse) 입력을 받을 수 있도록 설계하였다. 특히, 선박용 통신장비의 중요한 7가지로 한정하여 설계하였다. 본 연구의 소형화를 통하여 이동이 가능하도록 하여 그 편리성을 제공하고, 소형 PC 기반의 중앙 모니터링 시스템을 구현하여 다체널 인디케이트 시스템의 효율성을 제시하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2327-2332
• /
• 2011

Recently, the increase of loading amount on cargo ships due to the automation of loading process results in much complex ship operation. For this reason, NMEA-0183 based on RS-422,485 and NMEA-2000 based on CAN communication methods have been usually used as a standardized method in the marin electric interfacing equipments. In this paper, a general NMEA-0183 protocol was designed to support 7-channel NMEA-0183 serial communication data, which can receive 3-channel 16 bits ADC and 2-channel pulse using SPI(Serial Peripheral Interface). In particular, this method was designed for ship communication requires 7 important factors. Also in this study, using the minimization of the proposed method and realizing the monitoring system based on PC, the effectiveness of multichannel indicator system was proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1300-1305
• /
• 2020

Due to the simplicity of communication structure using RS-232 and RS-422, the majority ships have still adapted on these communication interfaces and have constructed their own communication network in the ship. NMEA-0183 is the one of standards for BNWAS(Bridge Navigational Watch Alarm System) and currently being used in many countries. BNWAS utilises diverse sensor devices, GPS, AIS and so on for monitoring the status of ships and their deployments and environmental information(temperature, humidity, wind speed/direction, water temperature/current etc…). This paper proposes the use of any image sensors in NMEA-0183 environment and verifies possibility with certain video qualities through the experiment results. Furthermore the paper gathers videos and monitors the change of their qualities depending on the number of NMEA messages on RS-232 communication link. Finally we make conclusion that our proposal is sufficiently appropriate for ship monitoring system in the NMEA-0183.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.90-92
• /
• 2015

This study aim is to effectively reduce the time that was required for the analysis on an existing communication protocol with the industrial monitoring equipment. We analyzed the collected data with the Modbus protocol and NMEA0183, which is widely used in industrial monitoring. and User will be easy converting to data for use on each devices. The main board of the protocol converter was used AVR128, and RS232C and Ethernet was configured to enable communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.577-578
• /
• 2010

The current marine communication networks are usually composed of NMEA0183, NMEA2000, and MiTS protocols which are located on the physical layer based on RS-422, RS-485, CAN, and EtherNet. This paper proposes a new bridge based on the DC power line communication technique supported from the NMEA0183 to design inside marine systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2419-2422
• /
• 2010

The current marine internal communication systems are usually composed of NMEA0183, NMEA2000, and MiTS protocols which are located on the physical layer based on RS-422, RS-485, CAN, and EtherNet. However, general vessel communication method have a weak point that must establish the extra private line. But, the power line communication has advantage over general vessel communication method as it uses AC220V/DC24V without changing line. Therefore, we will propose a new bridge based on the DC-PLC(power Line communication) technique which support the NMEA0183 protocol inside vessel network systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.556-557
• /
• 2012

선박의 안전한 운전을 위하여 선박 내/외에 다양한 계측장비를 추가하여 선박의 안전한 운항을 돕고 있다. 이러한 계측장비들과의 통신은 일반적인 RS-422,485 통신을 기반으로 NMEA0183과 고속의 통신 속도를 지원하는 CAN 통신 기반의 NMEA2000 프로토콜을 표준으로 하고 있다. 본 논문에서는 NMEA0183 프로토콜을 지원하도록 하고 NMEA0183 프로토콜 기반의 특정 선박용 통신 데이터를 사용자가 선택적으로 모니터링하고 체크할 수 있는 지능형 단말기를 설계하였다. 이러한 간단한 펌웨어 기반의 다기능 인디케이트(indicator)는 선박 내에서 사용할 수 있는 간편한 이동용 통신 프로토콜 체크기와 다양한 데이터를 선택적으로 모니터링 할 수 있는 다기능 인디케이트를 개발하여 실용 가능성을 제시하고 한다.