• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.44-48
• /
• 2013

In this work, we have prepared tungsten doped vanadium oxide ($W-VO_2$) particles with a low phase transition temperature. $W-VO_2$ particles were synthesized via thermolysis method using vanadyl (IV) sulfate and ammonium bicarbonate as precursors. The structure and thermochromic property of synthesized $W-VO_2$ particles were investigated by FE-SEM, EDS, XRD, XPS, and DSC analysis. The prepared $W-VO_2$ showed a nearly platy morphology, which indicates that the tungsten was successfully doped in the crystal lattices of $VO_2$. $W-VO_2$ nanoparticles with the size of 60 nm exhibited a monoclinic crystal structure and its chemical composition and surface state were also likely to be close to that of $VO_2$. In addition, the phase transition temperature of $W-VO_2$ was $38.5^{\circ}C$, which was approximately $29.2^{\circ}C$ lower than that of pure $VO_2$ ($67.7^{\circ}C$), indicating that the prepared sample had a good reversible thermochromic stability.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.79-83
• /
• 2000

Activated sludge samples were collected from a municipal sewage treatment plant and used for enrichment of microbial consortia with aniline as the sole carbon and nitrogen source. Threc aniline-degrading bacteria were obtained lrom microbial consortia and an isolate which has excellent aniline degradability was selected for this study. The isolate was Gram-negative, and identified and designated as Delfha sp. JK-2 on the basis of various physiological and biochemical tests. 10 mM aniline was completely degraded within 24 hours after inoculation of the culture. Ammonium ion was liberated in the medium transiently during the incubation and disappeared when aniline was completely degraded. Addition of glucose as a supplementary source to aniline minimal media showed significant decrease in aniline degradat~on rate for the strain Effective degradation of aniline was achieved by the addition of 0.5% nitrate as a nitrogen source, and resulted in approximately 80% higher aniline degradation compared to the absence of nitrate. Phylogenetic analysis based on 16s [DNA sequence revealed that the strain was closely related to De@ia acidovorans, with 96% overall similarity. The 16s [DNA sequence of JK-2 was also found to be closely related to those of six other clonal types, including Acidovoru, Aquaspirillum. Xylophilus, Variovorm, and Rhodofernr.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.554-566
• /
• 2018

The rice husk contains nutrients which can be easily utilized by microorganisms, and also has a water retaining ability, which played a crucial part in enabling it to become a biofilter media. In this study, we evaluated the applicability of rice husk pellet bio-scrubber as a microbiological carrier. The pelletization experiment of rice husk as a biological media was performed using PVA and EVA binder. Also, the feasibility tests of rice husk as a biological media for odor removal were carried out in order to know whether rice-husk contains useful components as a media for microbiological growth or not. Lastly, a combined test for odor gas absorption and biological oxidation was conducted using a lab scale bio-filter set-up packed with rice-husk pellets as wet-scrubber. The major components of the rice husk were carbon, hydrogen, nitrogen, and oxygen, while carbon acted as the main ingredient which comprised up to 23.00%. The C : N : P ratio was calculated as 45 : 1 : 2. Oxygen uptake rate, yield and decay rate of the rice husk eluent was calculated to be $0.0049mgO_2/L/sec$, 0.24 mgSS/mgCOD and 0.004 respectively. The most stable form of rice husk pellets was produced when the weight of the rice husk, EVAc, PVAc, and distilled water was 10 : 2 : 0.2 : 10. The prepared rice husk pellets had an apparent density of 368 g/L and a porosity of 59.00% upon filling. Dry rice husks showed high adsorption capacity for ammonia gas but low adsorption capacity for hydrogen sulfide. The bio-filter odor removal column filled with rice husk pellets showed more than 99.50% removal efficiency for NH3 and H2S gas. Through the analysis of circulation water, the prime removal mechanism is assumed to be the dissolution by water, microbial nitrification, and sulfation. Finally, it was confirmed that the microorganisms could survive well on the rice husk pellets, which provided them a stable supply of nutrients for their activity in this long-term experiment. This adequate supply of nutrients from the rice husk enabled high removal efficiency by the microorganisms.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.686-689
• /
• 2005

This study was conducted to investigate the effect of ammonium and nitrate nitrogen removal to applied voltage, electrolytic time and activated carbon packing height. Batch bipolar packed bed electrolytic cell reactor was packed with $4{\times}8$ mesh granular activated carbon (GAC). Afterward electrolysis was performed in 20 V for 30 min. As a result, as the filling height adjusted to 80 mm high, the removal efficiency of ammonium nitrogen was 99.9%. and as the electrolytic time varied to 60 min, the removal efficiency of ammonium nitrogen was 97.6%. and in case of continuous electrolytic treatment of ammonium and nitrate nitrogen removal efficiency of total nitrogen was over 80% in bipolar packed bed electrolytic cell reactor for 72 hours as the packing height, sample concentration and input rate of sample adjusted to 280 mm, 30 mg/L, 6.7 mL/min, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.211-217
• /
• 2013

Corynebacterium glutamicum is one of the well-studied industrial strain that is used for the production of nucleotides and amino acids. Recently, it has also been studied as a possible producer of organic acids such as succinic acid, based on its ability to produce organic acids under an oxygen deprivation condition. In this study, we conducted the optimization of medium components for improved succinate production from C. glutamicum under an oxygen deprivation condition by Plackett-Burman design and applied a response surface methodology. A Plackett-Burman design for ten factors such as glucose, ammonium sulfate, magnesium sulfate, potassium phosphate ($K_2HPO_4$ and $KH_2PO_4$), iron sulfate, manganese sulfate, biotin, thiamine, and sodium bicarbonate was applied to evaluate the effects on succinate production. Glucose, ammonium sulfate, magnesium sulfate, and dipotassium phosphate were found to have significant influence on succinate production, and the optimal concentrations of these four factors were sequentially investigated by the response surface methodology using a Box-Behnken design. The optimal medium components obtained for achieving maximum concentration of succinic acid were as follows: glucose 10 g/l, magnesium sulfate 0.5 g/l, dipotassium phosphate ($K_2HPO_4$) 0.75 g/l, potassium dihydrogen phosphate ($KH_2PO_4$) 0.5 g/l, iron sulfate 6 mg/l, manganese sulfate 4.2 mg/l, biotin 0.2 mg/l, thiamine 0.2 mg/l, and sodium bicarbonate 100 mM. The parameters that differed from a normal BT medium were glucose changed from 40 g/l to 10 g/l, dipotassium phosphate ($K_2HPO_4$) 0.5 g/l changed to 0.75 g/l, and ammonium sulfate ($(NH_4)_2SO_4$) 7 g/l changed to 0 g/l. Under these conditions, the final succinic acid concentration was 16.3 mM, which is about 1.46 fold higher than the original medium (11.1 mM) at 24 h. This work showed the improvement of succinate production by a simple change of media components deduced from sequential optimization.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.459-465
• /
• 1997

In order to extend the shelf-life of the low-salted Myungran-Jeot, before immersing alaska pollack roe, the salt solutions was adjusted to pH 7.0 and 4.7, respectively. pH during ripening was somewhat constant, whereas the content of lactic acid was slightly increased, and especially, that of pH 4.7 Myungran-Jeot was increased rapidly in the begining of fermentation period. $NH_2-N$ content of pH 4.7 Myungran-Jeot was increased with increasing fermentation period, whereas those of control and pH 7.0 decreased except the begining of fermentation period. The contents of TMA, TBA, and VBN of pH 4.7 were lower than those of control and pH 7.0. In addition, the mirrobial growth was significantly inhibited in pH 4.7 Myungran-Jeot. The estimated shelflives of control, pH 7.0, and pH 4.7 Myungran-Jeots were about 12, 12, and 16 days, respectively.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.9-16
• /
• 2015

In a recycling scheme of spent lithium ion batteries, a co-precipitation process for the re-synthesis of precursor is essential after the leaching of lithium ion battery scraps. In this study, the effect of ammonia as impurity during the co-precipitation process was investigated in order to re-synthesize a precursor of Ni-rich cathode active material $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM 622). As ammonia concentration increases from 1 M (the optimum condition for synthesis of the precursors based on 2 M of metal salt solution) to 4 M, the composition of obtained precursors deviates from the designed composition, most notably for Ni. The Ni co-precipitation efficiency gradually decreases from 100% to 87% when the concentration of ammonia solution increases from 1 M to 4 M. Meanwhile, the morphological properties of the obtained precursors such as sphericity, homogeneity and size distribution of particles were also investigated.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.3-27
• /
• 1996

분체의 입자 배열이 불규칙한 경우뿐만 아니라 입자 크기가 극미세하여 X선회절분석이 불가능한 경우에도 비정질물질이라 한다. 수용액 속에서 이런 비정질 물질을 합성하기 위해서는 합성용액의 과포화도를 높여 계속 유지시킴에 따라 극미세 1차핵 생성의 지속적인 유도에 따른 입자 성장을 최대한 억제시켜야만 한다. 본 연구에서는 흡습제, 칼슘제 및 식품 첨가제 등으로 이용되는 비정질 탄산칼슘을 계에서 합성하고, 이때 생성된 비정질 상태의 겔을 수용액 환경을 변화시켜가면서 따라 결정화를 유도하고 탄산칼슘의 동질이상을 관찰하였다. CO2의 유속을 11/min, 교반속도를 600rpm으로 고정시키고, Ca(OH)2의 양을 10g에서 50g까지 변화시켜가면서 겔 상태의 비정질 탄산칼슘을 합성하였다. 이때 전기전도도는 CO2의 용해와 더불어 Ca(OH)2의 용해도가 증가함에 따라 변화하였으며, 반응종반부에는 겔화가 시작될 때까지 거의 일정하였다. 따라서, 이러한 사실들로부터 현탁액 내에서의 전기전도도의 변화는 Ca이온의 영향을 받는 것으로 사료된다. 비정질 탄산칼슘은 수용액에서 불안정하여 CO2 가스를 방출하면서 급격히 결정화되는데, 본 연구에서는 Ca(OH)2의 양을 20g으로 하여 위의 방법에 의해 얻어진 겔을 수용액의 종류와 농도 및 결정화 온도, 교반속도를 달리하면서 결정화시켰다. 교반속도를 100rpm으로 하여 물의 온도변화에 다라 결정화시킨 경우 전 온도범위에서 칼사이트상이었으며, 물의 온도가 5$^{\circ}C$일 경우에는 미세한 입자들이 응집된 형태였으나, 그 외의 온도변화조건에서는 모두 평균입경 0.4$\mu\textrm{m}$정도의 비교적 균일하 능면체 형태였다. 또한 교반속도를 500rpm으로 증가시켰을 경우에는 8$0^{\circ}C$에서 침상의 아라코나이트가 소량생성되었음을 SEM사진으로 관찰할 수 있었으며, 소량의 바테라이트도 혼재되어 결정화되었음을 XRD결과로 알 수 있었다. 교반속도를 100rpm으로 한 NH4Cl 0.5mol/l 수용액에서는 입자의 형태와 크기가 불규칙한 칼사이트로 결정화되었으며, MgCl2 0.05mol/l 수용액의 경우에는 순수한 H2O의 경우에서와는 달리 2$0^{\circ}C$에서는 모서리가 무딘 매우 균일한 크기의 칼사이트 입자가 관찰되었으며, 6$0^{\circ}C$부터는 아라고나이트가 생성됨을 관찰할 수 있었다. 따라서, 고온(8$0^{\circ}C$)의 농도 MgCl2 수용액(0.1, 0.2 mol/l)에서 교반속도를 높여(800rpm) 겔을 결정화시킨 결과 아라고나이트의 생성수율이 증가되는 것을 확인할 수 있었다.

• Clean Technology
• /
• v.22 no.2
• /
• pp.114-121
• /
• 2016

In this studies, SCR reaction activity and SO₂ durability enhancement study on manufacturing conditions of the V/TiO₂ catalyst was carried out for the removal of nitrogen oxides generated in the combustion furnace. The catalysts are characterized by XPS, Raman, H₂-TPR and SO₂-TPD. When the vanadium was contained of 2 wt%, it showed excellent SO₂ durability and catalytic activity. and When the tungsten is added as a promotor, the enhancement of reducing ability at a low temperature and reduction of SO₂ adsorption capacity improved the reaction activity and SO₂ durability. V/W/TiO₂ are prepared by the lower pH of vanadium solution, vanadium was highly dispersed on the surface and inhibited the formation of crystalline V₂O₅. in addition, it was confirmed that this catalyst can be used as excellent resistance to high concentration of CO in the combustion furnace.

• Journal of Radiation Protection and Research
• /
• v.31 no.3
• /
• pp.129-134
• /
• 2006

A TL pellet for a neutron dose measurement (KCT-306) by embedding a $^6Li$-compound into a $CaSO_4:Dy$ phohphor was developed based upon the technical information of KCT-300. The KCT-300 is an another kind of $CaSO_4:Dy$ TL detector shich was developed at KAERI, in which small amounts of $NH_4H_2PO_4$ have been emvedded as a binding material. This paper presented the optimized manufacturing condition of KCT-306 and compared its sensitivity with that of the commercialized neutron TL pellets. $CaSO_4:Dy$ Phosphor with grain size ranging less than $45{\mu}m$ are used for the KCT-306. The optimum $CaSO_4:Dy$ TL phosphor, $^6Li$-compounds and P-compound as the binding material are determined as 20-40wt%, 50-70wt% and 20wt%. The TL pellet combination of our KCT-306/KCT-300, TLD-600/TLD-700 and TLD-600H/TLD-700H(Harshaw) have been irradiated in the neutron/gamma mixed fields from a $D_2O$ moderated $^{252}Cf$ neutron source. The KCT-300, TLD-700 and TLD-700H were used at the same time as gamma ray discriminators in the neutron/gamma mixed fields. It was found that the neutron/gamma response ratios of KCT-306/KCT-300, which were developed in this study, were approximately 4 times higher than those of the commercial TLD-600H/TLD-700H.