• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.169-174
• /
• 2017

BACKGROUND:Kiwifruit growers build their vineyards using many windbreaks to protect their kiwifruit vines from defoliation injury by strong winds such as typhoon. In this study, we have compared fruit quality, budbreak rate and floral bud as affected by windbreaks. And also we surveyed several microclimate indices of kiwifruit orchard depending on the covering materials of arch-type windbreaks. METHODS AND RESULTS: Five different windbreak materials including polyethylene film (PE), blue- and white-colored nets were tested in pipe-framed archtype kiwifruit vineyards as the covering materials. Photosynthetically active radiation (PAR), annual mean temperature (AMT) and chill unit (CU) as well as fruit quality were compared among the covering materials. In all treatments, annual PAR was more than $400{\mu}mol\;m^{-2}s^{-1}$, in which kiwifruit leaf could reach its maximum photosynthesis, since the leaves were emerged. Annual mean temperature was greater in 0.1 mm-PE covering as much as $1-2^{\circ}C$ than other windbreaks. In CU calculated by three different models, all windbreaks showed more than 1400 CU that is fully fulfilled CU for kiwifruit rest completion. There were no difference in budbreak rate among the covering materials. Fruit weight was heavier in 0.1 mm-PE and white-net (4 mm) than other windbreaks. CONCLUSION: Regardless of the windbreak materials, the PAR quantity was enough for kiwifruit photosynthesis. And CU for kiwifruit rest completion was fully achieved in all treatments. However, with respect to fruit weight, quantity of PAR, and AMT, etc., It is highly recommended for kiwifruit growers to choose 0.1 mm-PE and white-net (4 mm) as for their windbreaks materials.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.2
• /
• pp.118-131
• /
• 1997

An opening efficiency experiment of anchovy boat seine has been carried out using a half size of the ordinary seine to reduce the size of the seine net and to improve the fishing efficiency from field operation. The intervals of towing boats were set at 100, 200 and 300m, and the towing speed, at 0.6, 0.9, and 1.2k't by possible combinations of them. The vertical openings of wing net, inside wing net, bagnet and flapper as well as the spreads of the seine net and the towing tension of the warp were measured, to find out efficient fishing gear and method of the anchovy boat seine. The results obtained are as follows : 1. The vertical opening of the inside wing net ranged from 8.7m to 12.0m at the normal current and from 7.0m to 10.0m at the counter current, and that of the wing net, from 8.4m to 19.8m at the normal current and from 4.9m to 16.3m at the counter current. The vertical opening of the wing net and inside wing net decreased as the towing speed and intervals of the boats increase, from 66% to 16% and from 32% to 18% of the normal opening, respectively. 2. The vertical opening of the fore of bag net ranged from 7.9m to 12.8m at the normal current and from 7.4m to 9.7m at the counter current, and that of the flapper, from 3.4m to 5.1m at the normal current and from 4.4m to 5.1m at the counter current, and that of the flapper, from 3.4m to 5.1m at the normal current and from 4.4m to 5.1m at the counter current. The vertical opening of the bag net was from 98% to 57% of the normal opening and the flapper showed a circular shape and it rose up to the upper layer with a slower towing speed. 3. The vertical opening of the end of the bag net ranged from 7.1m to 9.3m at the normal current and from 7.4m to 8.8m at the counter current. The end of the bag net rose up to the upper layer, This phenomenon was more apparent as the towing speed and the interval of the boats increase. 4. The towing tension of the experimental nets increased from 648kg to 2,716kg at the normal current and from 1,050kg to 6,010kg at the counter current with increasing towing speed. 5. The net depth of the anchovy seine was stable with the higher towing speed and the wider interval of the boats, but it was unstable by rising up to the upper layer with the lower towing speed and the narrower interval of towing boats.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.75-85
• /
• 1998

Algal meal (cell) was produced from the solution of dairy cow wastes by fermentation of ulothrix. sp. and chlorella sp. Raw wastes mainly feces were diluted with ground water to give dry matter concentration of 0.5 w/v of wastes in 20 l amounts of ten plastic containers. Each containers were covered with plastic nets and vinyl films to protect from the insects and rain. Algea cells were harvested every 3 to 5 days and dried by sunlight and artifitial heat. Dried cells were ground by a feed meal, and analyzed and tested for the chemical composition of dry cell, in vitro DM and protein digestibility and the safty of algae. Protein contents in algae meals, ulothrix (29.37%) and chlorella (29.24%) were similar. However, chlorella contained lower Neutral detergent fiber (5.92%) than ulothrix(20,76%), and higher ash (32.86%) and calcium (12.62%) than ulothrix (28.66% and 6.09%) (P<.01). Ulothrix protein had higher for essential amino acids; valine, isoleucine and phenylalanine, than chlorella (P<.05). Algal fats contained high saturated fatty acids, C16:0 and C18:0, for ulothrix and high unsaturated fatty acids, C18:1 and C18:2, for chlorella (P<.01). In vitro digestibility of. ulothrix tended to be higher for DM, but lower for protein than chlorella. The weight gain and survival percentage were higher for pond fishes (loaches, Misgurnus sp. ) fed diet added chlorella meal than diets added ulothrix meal and control diet (P<.05).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.3
• /
• pp.150-159
• /
• 2008

The marine litter generated as by-products of human activities and economic development enters to the sea through rivers or stream Indirectly, and through sea-based activities directly. It is commonly comprised of materials that degrade very slowly, such as various plastic products, polystyrene, glass, rubber, metal, wood, derelict fishing nets, wire, rope and so on. Such litter is found in the water column and on the seafloor as well as coastal areas In the Northwest Pacific region. It causes injury or death of human and other living organisms and also accident or damage of the vessel. It is not only a problem of country but also regional and/or global problem because it is transported by currents and winds from one country to another. In this regard, Northwest Pacific Action Plan (NOWPAP) Marine Litter Activity (MALITA) project had been carried out during 2006-2007 biennium and NOWPAP Regional Action Plan on Marine Litter (RAP MALI) has been also continuously implemented in the 2008-2009 biennium as next phase step of MALITA. MERRAC, one of four Regional Activity Centres (RACs) of NOWPAP, has developed monitoring guidelines, sectoral guidelines, and brochures related to sea-based marine litter and port reception facilities and services through MALITA project. Based upon these output, MERRAC will continuously implement relevant activities of RAP MALI in order to help to establish and improve a regional mechanism to deal with the sea-based marine litter problem. This paper aims to introduce MERRAC activities under MALITA and RAP MALI, and to suggest several recommendations to reduce marine litter in the NOWPAP region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.49-54
• /
• 2017

We collected and reared Theragra chalcogramma walleye pollock brood-stock for use in natural spawning tests and undertook to obtain domestic pollock via fertilized egg capture, development of fertilized eggs, and absorption of yolk sac after hatching. Whole pollock were caught with trammel and set nets and immediately placed in a deep-sea water tank. Adults were the most common pollock age group (43.0%; n = 86) among the 254 pollock captured in March 2014 with 57.9% (n = 147) being captured off Southern Gosung, Korea. The main spawning period of pollock is February (spawning phase of 91% of pollock). From the deep-sea tank, we collected 1640 mL of naturally fertilized eggs (~820,000 eggs) from 12 spawning events occurring between February 4 and 22 2015. The floating/ live eggs were maintained in deep-sea water tanks at $5.5{\pm}0.2^{\circ}C$. Egg size was $1.5{\pm}0.03mm$. Six hours after fertilization the eggs were at the 2 cell stage, and the eggs hatched approximately 340 hours after collection. At hatching, larval length and yolk sac area were $5.2{\pm}0.25mm$ and $9.5{\pm}1.00mm^2$ (100%), respectively. Four days after hatching, the yolk sac area was $2.2{\pm}0.53mm^2$ ($23.1{\pm}5.55%$). This is the first report of collection of naturally fertilized eggs from pollock and their subsequent hatching while held in an indoor deep-sea water tank. The results suggest that such collection could assist in the recovery of pollock resources and the possibility of domestic rearing of cultivated larvae.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.602-612
• /
• 2010

This study was conducted to investigate the state of hygiene education aimed for by bakers, and the evaluations of the importance and the performance concerning sanitary characteristics by the bakers. The questionnaires were administered to 186 bakers in Busan and the data evaluated by 5 scales method of Likert were statistically analyzed. 20.4% of bakers have not received hygiene education. Only 32.8% of bakers have experienced hygiene education regularly. The more the bakers were educated, the more they practiced the contents of hygiene education. The major reason of education unfulfilment was due to insufficient equipments and facilities. The scores of the hygienic performance of educated bakers were significantly (p<0.05) higher than those of uneducated bakers in food sanitation, especially for sanitary characteristics on inspection, pre-preparation and distribution. The mean scores of the importance and the performance evaluated by bakers were 4.05/5.00 and 3.76/5.00, respectively. The bakers assessed the highest scores on the importance and the performance of personal hygiene. The gap score was -0.30 between the importance and the performance for sanitary characteristics. The baker recognized that sanitary management was not performed as much as they recognized its importance. The importance and the performance grid of bakers revealed that the items of checking the certification for the origin of new food ingredient, inspecting deliveries as quickly as possible, separation between preparing and breading time, thawing frozen food under running tap water/in refrigerator, separating disposal gloves and utensils by the purpose, putting products in cleaned and sterilized utensils, letting consumes know the expiration date of products, preventing a rubber hose from being left on the kitchen floor, checking insect nets frequently and so on showed lower scores compared to the mean scores of the importance and the performance. The levels of the hygienic performance by bakers were positively correlated (p<0.01) with the recognitions of the importance on sanitary characteristics. These results might provide basic data for hygienic training and play a role on the improvement of the sanitary management in bakery.

• Journal of Aquaculture
• /
• v.8 no.3
• /
• pp.195-207
• /
• 1995

In order to study the embryonic development and hatching of wild long shanny, Stichaeus grigorjewi, were caught with the gill nets in the East Sea of Korea, and stocked at indoor tanks to induce natural spawning in February 25, 1994 and February 16 to 24, 1995. They were already matured when stocked, and average body length (50.66 cm) and body weight (1,192.74 g) of 57 females and average body length (48.62 cm) and body weight (612.58g) of 43 males were recorded. Before stocking, they were inserted with identification tags(ID tags) in the dorsal muscle, and spawning was traced by the portable reader (Destron/lDl Ltd.) Forty females among 57 spawned successfully in the average of 4 days after stocking. Females spawned almost all eggs contained in the ovaries at one time in the form of an egg mass and averaging 227,200 eggs Per egg mass. The egg mass was oval in shape, translucent milky in color, 20.32cm long axis and 14.57cm short axis in size, and 803.7g in weight. Male parents guarded their egg masses and circulated water with the tail part of the body. Fertilized egg was spherical in shape, and their average diameter was 1.54 mm. Each egg had a containing single oil globule, and it's average diameter was 0.37 mm. The average water temperature was $13.2^{\circ}C$ and incubation times after fertilization were 5 hours 25 minutes up to 2-cell stage, 13 hours up to morula stage, and 66 hours 35 minutes up to embryo formation stage. Hatching rate was approximately 10 percent in 368 hours 50 minutes after fertilization, and approxionateoly 90 percent of eggs were hatched in 425 hours 30 minutes after fertilization.

• The Korean Journal of Malacology
• /
• v.24 no.2
• /
• pp.131-136
• /
• 2008

Growth and survival of the spat of arkshell, Scapharca broughtonii were investigated for the improvement of survival in intermediate culture with different shape of protective net and type of preventive net of spat loss. The growth performance of the spat of arkshell was observed for 60 days by using different forms of protective net, as the exposure form with an average shell length of $12.8{\pm}3.2$ mm(P<0.05), the fish pot form with $12.2{\pm}3.5$ mm, the cylinder form with $11.9{\pm}3.8$ mm and the last one is the rectangular form with $10.9{\pm}3.7$ mm. Their numerical value did not show any marked difference with each other. But in case of survival rate, the fish pot form showed highest survival rate which is 43.7% and the significantly lowest was showed by the exposure form, which is 5.4%(P<0.05). The cylinder form and rectangular form showed 41.2 and 31.6% respectively. And then the growth of the spat of arkshell was observed for 163 days by rearing in a sort of preventive net, the first group was in a blackout curtain with average shell length of $13.9{\pm}3.1$ mm, the next group was in a balsam pear net with $12.9{\pm}3.0$ mm, in a polyethylene net with $11.8{\pm}3.1$ mm and the control with $12.6{\pm}3.3$ mm which was not installed by preventive net of spat loss. The survival rate was 91.5% in a blackout curtain, 90.1% in a polyethylene net, 88.5% in a balsam pear net and 61.5% in a controlled group. It is seen that the highest growth and survival rate were observed in a fish pot form and cylinder form. These results were a little bit difference from those of the spat of arkshell cultured in the form of different preventive nets. There was no significant difference in survival rate in relation to the sorts of preventive net against carrying-away, but there was a difference in survival rate by more than 30% as against the non-installed controlled group. We expect that survival rate would be highly improved in intermediate culture carried out with fish pot form and cylinder form of protective net and preventive net of spat loss.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.1 s.19
• /
• pp.16-30
• /
• 1986

In order to prepare the fundamental data for the improvement of noisy working environments and the effective hearing conservation program on workers exposed to industrial noise, the authors surveyed the working processes and evaluated the noise levels on 56 manufacturing industries in Pusan area from April to July in 1985. The results were summarized as follows : 1. The noise level was the highest in shipbuilding and repairing(95.6 dBA), and followed by steel rolling(94.0 dBA), manufacture of motor vehicles(93.1 dBA), manufacture of fishing nets(92.9 dBA), manufacture of testiles(92.5 dBA), iron and steel foundries(89.3 dBA), manufacture of metal products(89.1 dBA), preserving and processing of marine foods(87.0 dBA), manufacture of rubber products(85.3 dBA), manufacture of plywood(84.9 dBA) and manufacture of paints(84.5 dBA). 2. Among fifty surveyed working processes, the noise level of twenty-one processes (42%) exceeded the threshold limit value for 8 hours per day. 3. As the allowable exposure times by governmental threshold limit values to industrial noise level(dBA), cocking of shipbuilding and repairing and plating(CGL) of steel rolling were the shortest(30 minutes), and followed by assembling(rivet) of manufacture of motor vehicles(1 hour) weaving of manufacture of textiles and shot, machine, pipe laying of shipbuilding and repairing(2 hours). 4. By the result of octave band analysis on noisy working processes in excess of 90 dBA, the sound level was the highest at 2,000 Hz or 4,000 Hz. 5. It was recognized that the measurement of overall sound pressure level was also effective as octave band analysis in evaluating the industrial noise.

• Journal of Aquaculture
• /
• v.10 no.3
• /
• pp.261-271
• /
• 1997

Ammonia removal capacities of five submerged filter media, 2~3mm sand, 30~50mm gravel, 20~40mm coral sand, polythylene net, and corrugated plastic plate in a seawater recirculating system were tested. A rotating biological contactor (RBC) was also tested for comparison. Oxygen consumption rates were measured along with the ammonia removal efficiencies. The ammonia concentrations in the system were maintained from 0.052 to 0.904 mg/l (mean 0.338$\pm$0.219 mg/l) and the water temperature was ranged from 19.2 to $21.4^{\circ}C\;(mean 20.2^{\circ}C\pm0.58^{\circ}C$). The 1/2-order kinetic model (Y:g/$m^3$/day) and the mean ammonia removal rates (g/$m^3$/day) of the filter media were : Sand : Y=135.5X0.5-25.1(r2=0.8110), 45.1 Coral sand : Y=125.1X0.5-33.0 (r2=0.7307), 31.8 Polyethylene net : Y=87.4X0.5-20.1 (r2=0.6780), 25.2 Corrugated plastic plate : Y=87.4X0.5-20.1(r2=0.5206), 19.2 Gravel : Y=4307X0.5-5.5 (r2=0.2596), 17.1 RBC : Y=127.6X0.5-33.4 (r2=0.7146), 32.8 where X is the concentration of ammonia. Oxygen consumption rates well corresponded to the ammonia removal capacities of each filter medium, thus the sands showing the highest value (442g/$m^3$/day) followed by coral sands (291.1g/$m^3$/day), polyethylene nets (236.9g/$m^3$/day), gravels (135.6g/$m^3$/day) and corrugated plastic plates (134.2g/$m^3$/day). Oxygen consumption rate of the RBC was unable to measure because of the characteristics of the structure.