• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.404-408
• /
• 1999

Gallium doped zinc oxide(GZO) films were deposited on soda-lime glass substrates without substrate heating $(T_s<50^{\circ}C$) by dc planar magnetron sputtering using GZO ceramic oxide targe with different inert gas (Ar, or Ne). For the GZO films deposited under different total gas pressure $(P_{tot})$, structural and electrical properties were investigated by XRD and Hall effect measurements. Crystallinity of GZO films deposited using Ar was degraded with increase in $(P_{tot})$, suggesting that it was heavily affected by kinetic energy of sputtered Zn particles$(PA_{zn})$ arriving at substrate surface. Whereas, crystallinity of GZO films deposited at lower Ptot than 3.0 Pa using Ne gas was degraded with decrease in $(P_{tot})$. This degradation was considered to be result of film damage caused by the bombardment of high-energy neutrals ($Ne^{\circ}$). On the basis of a hard sphere collision processes, the average final energy of particles (sputtered Zn, $Ar^{\circ}$and $Ne^{\circ}$)arriving at substrate surface were estimated.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.10a
• /
• pp.115-124
• /
• 1995

The purpose of the present study was to address whether the in vivo noradrenergic neural activities in the locus coeruleus are involved in the regulation of blood pressure. Two groups of the animals were prepared, 1) SHR and 2) age-matched normotensive control, WKY. At the age of 6 and 16 weeks, blood pressure and the releases of NE from the locus coeruleus in SHR and KWY were measured by in vivo microdialysis at three different conditions: 1) normal, 2) elevated state of blood pressure by systemic injected phenylephrine and 3) increased state of neural activity by perfused phenylephrine into the locus coeruleus. The basal release of NE of SHR were significantly higher than that of WKY, Phenylephrine treatment caused elevation of blood pressure in both SHR and WKY in dose-dependent manner. Following phenylephrine injection, the releases of NE from the locus coeruleus of SHR were significantly decreased, whereas the significant change of NE in WKY was observed in the highest dose of phenylephrine. Phenylephrine perfusion into the locus coeruleus through microdialysis probe caused pressor responses and the pressor response in SHR was greater compared with that in WKY. The results from the present study suggests that the noradrenergic nervous system in the locus coeruleus may contribute as one of the development and maintenance factors for hypertension in SHR.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.5
• /
• pp.164-169
• /
• 1983

A method to control the luminous colour of a gaseous discharge tube has been investigated by using the saw-tooth wave of which rise-time was controlled by an electronic circuit. The luminous colour of a Ne - Hg lamp was changed from red to blue continuously and vice versa, and it's luminous characteristics are as follows: (a) With D.C. potentials, it showed blue colour and the relative intensity of the colour is increased first and saturated at about 17 mA as the discharge current is increased. (b) When the rise-time of the saw-tooth wave is about 10 $\mu\textrm{s}$, the red colour which is caused by Ne - excitation is dominant, and when about 200 $\mu\textrm{s}$, only the blue colour which is caused by Hg - excitation is shown. (c) With saw-tooth pulse, the relative intensity of blue is increased similarly as that with D.C. potential as the current peak of each pulse is increased, while that of red is increasing continuously and it's intensity shows about twice than blue. (d) The spectrum of red colour contains Ne - excitation lines and Hg - blue lines, but the apparent luminous colour is red because Ne - red lines are more plenty than Hg-blue lines. The spectrum of blue colour presents only Hg-blre lines.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.176-194
• /
• 1991

A study on the Manufactiring of High-Precision Linear Scale by the Use of He-Ne Laser Interference Of late, along with the advancement of procision machining technology, the reauirement of super-precision measurement increases as time goes on, and the precision and accuracy of standard scale which is a basis of procision measurement has been cognized as a oriterion of industrial development in a nation. Up to now, mechanical and chemical methods have been widely employed to carve scale lines on linear scale, and it is impossible for the linear scale manufactured by means of those methods to guarantee the measurement with sub-micron level owing to errors attended with various problems. And the measuring length also bears errors subjected to the influence of surroundings condition, and shows inefficient circumstances in measurement on the ground of the complexity of measuring procedure as well as massive measuring apparatus. Hence in this paper, we described on technology by which we can carve scale lines thru optical method under the condition of laboratory by using rhcoherence of He-Ne two-mode stabilized laser and in turn, put it to practical use as linear scale for the measurment of lengrh. In this researchin the case of setting scale interval to 20 .mu. m, we employed super-precision scale-carving device associated by Ar larser and acoustic optical modulator in lieu of flsahing lamp scale-carving device, and we consequently obtained superior linear scales carved with precision and accuracy of .+-. 0.3 .mu. m.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.82-92
• /
• 1991

A study on the manufacturing of High Precision Linear Scalr using He-Ne Laser interference Of late, along with the advancement of precision machining technology, the requirement of super precision measurement increases as time goes on, and the accuracy of standard scale which is a basis of precision measurement has been cognized as a criterion of industrial development in a nationl. In this paper, we described on technology by which we could carve scale lines thru optical method under the condition of laboratory by using the coherence of He-Ne two-mode stabilized laser and in turn, put it to practical use as linear scale for the measurement of length. Hence in this research in the case of setting scale interval to 20 ${\mu}m$, we employed super precision scale-carving device associated with Ar laser and acousto optic modulator in lieu of flashing lamp scale-carving device, and we obtained as experimental result superior linear scales carved within the accuracy of ${\pm}$0.3${\mu}m$.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.29-35
• /
• 2020

The cure characteristics of three kinds of naphthalene type epoxy resins(NET-OH, NET-MA, NET-Epoxy) with a 2-methyl imidazole(2MI) catalyst were investigated for preparing sheet epoxy molding compound(SEMC) for wafer level package(WLP) applications, comparing with diglycidyl ether of bisphenol-A(DGEBA) and 1,6-naphthalenediol diglycidyl ether(NE-16) epoxy resin. The cure kinetics of these systems were analyzed by differential scanning calorimetry with an isothermal approach, and the kinetic parameters of all systems were reported in generalized kinetic equations with diffusion effects. The NET-OH epoxy resin represented an n-th order cure mechanism as like NE-16 and DGEBA epoxy resins, however, the NET-MA and NET-Epoxy resins showed an autocatalytic cure mechanism. The NET-OH and NET-Epoxy resins showed higher cure conversion rates than DGEBA and NE-16 epoxy resins, however, the lowest cure conversion rates can be seen in the NET-MA epoxy resin. Although the NETEpoxy and NET-MA epoxy resins represented higher cure reaction conversions comparing with DGEBA and NE-16 resins, the NET-OH showed the lowest cure reaction conversions. It can be figured out by kinetic parameter analysis that the lowest cure conversion rates of the NET-MA epoxy resin are caused by lower collision frequency factor, and the lowest cure reaction conversions of the NET-OH are due to the earlier network structures formation according to lowest critical cure conversion.

• Korean Journal of Veterinary Research
• /
• v.46 no.2
• /
• pp.87-96
• /
• 2006

We established an in vitro experimental system using the following procedure. We first introduced tritium-labeled norepinephrine ([$^3$H]-NE) into PC12 cells, The [$^3$H]-NE incorporated into PC12 cells were then stimulated by a high concentration (60 mM) of $K^+$ buffer during 12 minutes. Then, we collected $100{\mu}l$ supernatant and counted the amount of [$^3$H]-NE release from PC12 cells with a scintillation counter. After screening fungal, Streptomyces spp. or bacterial product using this experimental sytem, we obtained FS11052 from Streptomyces spp. which inhibited [$^3$H]-NE release from PC12 cells. FS11052 also inhibits the release of ATP as a neurotransmitter of PC12 cells and rat cortical neurons, The inhibitory effect was seen even when the PC12 cells were treated with low $K^-$ buffer containing ionomycin ($1{\mu}M$) as an ionopore. This result suggests that the inhibitory action of FS11052 on neurotransmitter release appeared after the influx of $Ca^{2+}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.445-446
• /
• 2008

In this paper, we investigated the diffraction grating efficiency on Ag-doped amorphous chalcogenide Ag/AsSeS thin film for used to volume hologram. The film thickness was 2 um and diffraction efficiency was obtained from He-Ne (632.8nm) and DPSS(532nm) (P:P) polarized laser beam on Ag/AsSeS thin films. As a result, for the films, the maximum grating diffraction efficiency using He-Ne laser(632nm) is 0.15%[2000sec]. And then The recording speed of DPSS laser was about 40s which of batter than He-Ne lasers.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.200-201
• /
• 2006

현재상용화 되어 있는 AC PDP는 Ne, Xe 혼합가스를 주로 사용한다. Xe gas의 비율이 높아짐에 따라 PDP의 휘도와 효율은 상승하지만 그와 동시에 방선 전압도 함께 상승하여 이 분야의 연구가 요구된다. 그래서 우리는 Ne gas를 버퍼 가스의 사용하괴 Xe gas를 0${\sim}$15%, Kr gas를 0${\sim}$50% 비율의 첨가하여 패널의 방전 개시 전압, 방선 유지 전압, 방선 마진, 휘도, 효율을 측정하였다. 그 결과 방선 개시 전압이 같고 효율이 각각 2.93[Im/w], 3.23[Im/w]인 Xe10%+Kr20%, Xe5%+Kr40%와 같은 최적의 3원 가스조합을 찾아내었다. 또한 Xe gas와 Kr gas의 합이 40%일 때 효율이 가장 좋아지는 것을 알 수 있었다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.93-101
• /
• 2010

Although various network management architectures such as centralized, distributed, and hybrid have been presented, any one is not always efficient in all the environment. In this paper, we propose a hierarchical and split network management architecture based on MA+SNMP in order to manage a network of many small NEs distributed over the wide area. Our hierarchical architecture has MA-based proxy management nodes for the flexibility and overhead reduction in NMS as well as SNMP-based NEs considering NE's capacity. Through the analysis with real experiments, we show that our proposal improves some drawbacks and the processing delay of the existing architectures in the given environment.