• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2297-2311
• /
• 1994

This paper presents the study on the development of a DNC, system IPIS(Interactive Plant Information System)/DNC, which can manage NC machines and robots as a distributed control method in the machine. processing factory. The IPIS/DNC system is composed of a host computer, satellites and NC machines. A set of software modules are developed on the host computer and the satellites separately. By modularizing each functions of the IPIS/DNC system and using multi-taking method, the functions such as NC program management, NC program distribution, and shop monitoring can be performed on the host computer, and the functions such as NC program transfer to the NC machines, and NC program editing can be performed on the satellites. A Relational database which is linked with job scheduling system is used for IPIS/DNC system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.229-232
• /
• 2000

This research aims at developing a low-cost PC-NC system based on one-CPU and investigating the feasibility of its application to a simple-function lathe. Its hardware consists a two axes motion control board including a 24bit counter, 8253 timer, a 12bit DA converter, DIO board for PLC operation and a PC with Intel Pentium 466MHz. The fundamental real-time MC functions such as G-code interpretation, interpolation, position and velocity control of axes are performed. User programming interface with functions of icon manipulation, tool-path simulation and NC-code generation was implemented. In order to achieve real-time control and safety, axis control, NC interpretation, interpolation and user communication are completely executed during every interrupt interval of I msec.

• 한방안이비인후피부과학회지
• /
• 제18권1호
• /
• pp.116-134
• /
• 2005

Although the parallel prescription of Sopoongsangagambang (SG) administration along with external treatment such as spraying or ointment application on the skin is clinically used for the treatment of atopic dermatitis (AD), molecular mechanism underlying its effectiveness is unknown. Thus in the present study, diverse immune responses in terms of chemical mediators related to AD were investigated using an atopic mouse model NC/Nga after SG administration and external treatment (ET), and major findings are summarized as follows. 1. The clinical severities in 16 and 20 week old NC/Nga mice with SG and ET treatment were decreased to 72.2% and 62.3% respectively compared to the control NC/Nga mice with no drug treatment. 2. IgE, IL-4, IL-5, IL-6, IL-13, IgM, IgG1 and IgG2a levels in the serum of SG and ET treated NC/Nga mouse group were significantly decreased compared to the untreated control mice. In contrast, $IFN-{\gamma}$ showed a significant increase in the experimental group compared to the untreated control group. 3. The spleen weight of SG and ET treated NC/Nga mice was significantly decreased compared to the untreated control group. 4. The B/T ratio in the lymph node of SG and ET treated NC/Nga mice was increased compared to the untreated control group. $CD4^+\;and\;CD8^+$ cell numbers in the lymph node of SG and ET treated NC/Nga mice were significantly increased compared to the untreated control group, but $CD69^+\;and\;CD11a^+$ cells were significantly decreased. 5. mRNA expression levels of IL-4, IL-5, and CCR3 in the skin tissues of SG and ET treated NC/Nga mice were significantly decreased, and expression levels of IL-6, IL-13, $CD69^+/CD3{\varepsilon}^+\;and\;CD19^+/CD44^+$ in the skin tissues of SG and ET treated NC/Mga mice were significantly decreased compared to the untreated control group. $IFN-{\gamma}$ mRNA expression levels were increased compared to the untreated control group. 6. Histological observation of the ear and neck skin tissues showed that the extents of inflammation and infiltrated immune cells in the epidermis and dermis of SG and ET treated NC/Nga mice were highly reduced compared to the untreated control group. 7. Lymphokine assay showed a significant decrease in IL-4 levels in SG and ET treated NC/Nga mice compared to the untreated control group, but the levels of $IFN-{\gamma}$ secretion were significantly increased drug treated NC/Nga mice.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.237-241
• /
• 1987

In this paper, the BTR (Behind the Tape Reader) type communication unit which interfaces the IEBM PC/XT to the FANUC 5M NC controller is developed, making it possible to send NC part program from the memory of IBM PC/XT to the NC controller. As an example of integration of CAD and CAM technologies, the machining of a two dimensional hand-written free line which incorporates the processes of geometric data acquisition using a digitizing tablet, automatic part programming and control of NC milling machine operation is demonstrated.

• 한국한의학연구원논문집
• /
• 제13권3호
• /
• pp.87-95
• /
• 2007

Objectives : The aim of this study was to investigate the antihypertensive effect of S'NC nerve control treatment in hypertensive patients. Methods: We measured the blood pressure of 5 patients who were admitted in the Oriental Medical Clinic of S'NC Medicine Research Institute from 19th April 2007 to 29th June 2007. Eligible participants had systolic blood pressure ${\ge}$140mmHg or diastolic blood pressure ${\ge}$90mmHg. Blood pressure measurements were after the patient had been in bed rest for at least 10 min. Ten sessions of S'NC nerve control treatment over 2 weeks were performed in the patients. Blood pressure were measured twice before and after each treatment. Results : After 2 weeks, blood pressure reduction was observed in the treatment patients, with an average decline of systolic blood pressure up to 21mmHg and diastolic blood pressure up to 20mmHg. But, there were not statiscally significant The effects of S'NC nerve control treatment by measuring time on blood pressure were as follows: In a systolic blood pressure(p=0.087) and diastolic blood pressure(p=0.609) was gradually deceased not significantly from 1st to 10th. Conclusion: These results suggest that S'NC nerve control treatment may be efficacious in decreasing arterial blood pressure in hypertensive patients. Controlled trials investigating the efficacy of S'NC nerve control treatment for lowering blood pressure are warranted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1039-1042
• /
• 1995

In real time application such as motion control, it is hard to find the application of non-causal filtering due to its need for future position data, even though it shows wide usage in off-line digital signal processing. Recently, some of motion control areas such as learning and repetitive control use non-causal filtering technique in their application. these kinds of zero-lag non-causal filter application are very usful not only to reduce the machine vibration, but also to increase control accuracy with comparatively less work. In this paper, genuine method to implement zero-lag non-causal filter in a CNC is introduced. Also the variation of this implementation for the learning operation is suggested to give the NC better control performance for a specific job. By adopting the new NC architecture call Soft-NC, all these implementions are made possible here, and especially large memory requirement which hinders their usage for many years is no longer barrier in their real world application.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.27-33
• /
• 1999

In order to regulate cutting force at a desired level during NC lathe process, a feedrate override Adaptive Control Constraint system was developed. Nonlinear model of the cutting process was linearized as an adaptive model with a time varing process parameter. Performance of the ACC system was confirmed on the NC lathe equipped with the developed NC system through a large amount of experiment.

• 대한기계학회논문집
• /
• 제5권3호
• /
• pp.207-216
• /
• 1981

Recently in some nations, the interface of NC machine tool is by applying the softwired sequence control method which employs the PLE(Programmable Logic Controller) instead of the hardwired sequence control method. Due to this replacament, the funcion of the interface of NC machine tool has been improved in many respects. In order to accomplish such as improvement of the function of the interface and to develop the PLC, this paper deals with how to apply the sofrwired sequence control method that employs microcumputer to the interface of ATC(Automatic Tool Changer) which is a part of NC lathe.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.182-189
• /
• 2000

This paper presents the real time control method of 5-axis NC machine for high precision and productivity based on the curvature theory, of a ruled surface. The trajectory, of NC machine is described by, way of a ruled surface generated by the points on part surface and tool axis direction vector. The curvature theory, of a ruled surface is then applied to deter-mine the motion parameters of the 5-axis machine for control. The controller computes position, orientation, and differential motion parameters of the tool in each sampling period. The real-time approach produces smoother surfaces and requires substantially less machining time compared to conventional off-line approaches. The propose real-time control method based of the curvature theory of a ruled surface may give new methodology of precision 5-axis machine control.

• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.145-152
• /
• 2000

DNC(Direct Numerical Control) 네트워크 시스템에 대한 프로그램을 효율적으로 하기 위해서 현재 많은 시스템들이 개발되어 지고있다. 그러나 이 시스템들은 원거리 상의 컴퓨터와 머시닝 센터간에 상호연결이 원만하지 않아 작업에 비효율적인 면이 있고, 또 머시닝 센터의 데이터 송$\cdot$수신에서 오류가 발생되면 시스템에서 운영자가 적절한 대처를 할 수가 없다는 문제점이 있다. 그래서, 본 논문에서는 DNC Network을 통해 NC Controller에서 컴퓨터의 데이터를 오류가 없이 수신이 가능한 데이터 원격제어 시스템을 새로이 구성하였다. 이 데이터 원격제어 시스템의 주요 장점으로는 머시닝 센터에서 운영자가 쉽게 컴퓨터에 저장된 NC데이터의 호출과 송출이 자유롭고, 컴퓨터와 공작기계간의 상호대화가 없어도 NC기계 상에서 원격제어(Remote Control)가 가능하다.