• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2297-2311
• /
• 1994

This paper presents the study on the development of a DNC, system IPIS(Interactive Plant Information System)/DNC, which can manage NC machines and robots as a distributed control method in the machine. processing factory. The IPIS/DNC system is composed of a host computer, satellites and NC machines. A set of software modules are developed on the host computer and the satellites separately. By modularizing each functions of the IPIS/DNC system and using multi-taking method, the functions such as NC program management, NC program distribution, and shop monitoring can be performed on the host computer, and the functions such as NC program transfer to the NC machines, and NC program editing can be performed on the satellites. A Relational database which is linked with job scheduling system is used for IPIS/DNC system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.229-232
• /
• 2000

This research aims at developing a low-cost PC-NC system based on one-CPU and investigating the feasibility of its application to a simple-function lathe. Its hardware consists a two axes motion control board including a 24bit counter, 8253 timer, a 12bit DA converter, DIO board for PLC operation and a PC with Intel Pentium 466MHz. The fundamental real-time MC functions such as G-code interpretation, interpolation, position and velocity control of axes are performed. User programming interface with functions of icon manipulation, tool-path simulation and NC-code generation was implemented. In order to achieve real-time control and safety, axis control, NC interpretation, interpolation and user communication are completely executed during every interrupt interval of I msec.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.18 no.1
• /
• pp.116-134
• /
• 2005

Although the parallel prescription of Sopoongsangagambang (SG) administration along with external treatment such as spraying or ointment application on the skin is clinically used for the treatment of atopic dermatitis (AD), molecular mechanism underlying its effectiveness is unknown. Thus in the present study, diverse immune responses in terms of chemical mediators related to AD were investigated using an atopic mouse model NC/Nga after SG administration and external treatment (ET), and major findings are summarized as follows. 1. The clinical severities in 16 and 20 week old NC/Nga mice with SG and ET treatment were decreased to 72.2% and 62.3% respectively compared to the control NC/Nga mice with no drug treatment. 2. IgE, IL-4, IL-5, IL-6, IL-13, IgM, IgG1 and IgG2a levels in the serum of SG and ET treated NC/Nga mouse group were significantly decreased compared to the untreated control mice. In contrast, $IFN-{\gamma}$ showed a significant increase in the experimental group compared to the untreated control group. 3. The spleen weight of SG and ET treated NC/Nga mice was significantly decreased compared to the untreated control group. 4. The B/T ratio in the lymph node of SG and ET treated NC/Nga mice was increased compared to the untreated control group. $CD4^+\;and\;CD8^+$ cell numbers in the lymph node of SG and ET treated NC/Nga mice were significantly increased compared to the untreated control group, but $CD69^+\;and\;CD11a^+$ cells were significantly decreased. 5. mRNA expression levels of IL-4, IL-5, and CCR3 in the skin tissues of SG and ET treated NC/Nga mice were significantly decreased, and expression levels of IL-6, IL-13, $CD69^+/CD3{\varepsilon}^+\;and\;CD19^+/CD44^+$ in the skin tissues of SG and ET treated NC/Mga mice were significantly decreased compared to the untreated control group. $IFN-{\gamma}$ mRNA expression levels were increased compared to the untreated control group. 6. Histological observation of the ear and neck skin tissues showed that the extents of inflammation and infiltrated immune cells in the epidermis and dermis of SG and ET treated NC/Nga mice were highly reduced compared to the untreated control group. 7. Lymphokine assay showed a significant decrease in IL-4 levels in SG and ET treated NC/Nga mice compared to the untreated control group, but the levels of $IFN-{\gamma}$ secretion were significantly increased drug treated NC/Nga mice.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.237-241
• /
• 1987

In this paper, the BTR (Behind the Tape Reader) type communication unit which interfaces the IEBM PC/XT to the FANUC 5M NC controller is developed, making it possible to send NC part program from the memory of IBM PC/XT to the NC controller. As an example of integration of CAD and CAM technologies, the machining of a two dimensional hand-written free line which incorporates the processes of geometric data acquisition using a digitizing tablet, automatic part programming and control of NC milling machine operation is demonstrated.

• Korean Journal of Oriental Medicine
• /
• v.13 no.3
• /
• pp.87-95
• /
• 2007

Objectives : The aim of this study was to investigate the antihypertensive effect of S'NC nerve control treatment in hypertensive patients. Methods: We measured the blood pressure of 5 patients who were admitted in the Oriental Medical Clinic of S'NC Medicine Research Institute from 19th April 2007 to 29th June 2007. Eligible participants had systolic blood pressure ${\ge}$140mmHg or diastolic blood pressure ${\ge}$90mmHg. Blood pressure measurements were after the patient had been in bed rest for at least 10 min. Ten sessions of S'NC nerve control treatment over 2 weeks were performed in the patients. Blood pressure were measured twice before and after each treatment. Results : After 2 weeks, blood pressure reduction was observed in the treatment patients, with an average decline of systolic blood pressure up to 21mmHg and diastolic blood pressure up to 20mmHg. But, there were not statiscally significant The effects of S'NC nerve control treatment by measuring time on blood pressure were as follows: In a systolic blood pressure(p=0.087) and diastolic blood pressure(p=0.609) was gradually deceased not significantly from 1st to 10th. Conclusion: These results suggest that S'NC nerve control treatment may be efficacious in decreasing arterial blood pressure in hypertensive patients. Controlled trials investigating the efficacy of S'NC nerve control treatment for lowering blood pressure are warranted.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1039-1042
• /
• 1995

In real time application such as motion control, it is hard to find the application of non-causal filtering due to its need for future position data, even though it shows wide usage in off-line digital signal processing. Recently, some of motion control areas such as learning and repetitive control use non-causal filtering technique in their application. these kinds of zero-lag non-causal filter application are very usful not only to reduce the machine vibration, but also to increase control accuracy with comparatively less work. In this paper, genuine method to implement zero-lag non-causal filter in a CNC is introduced. Also the variation of this implementation for the learning operation is suggested to give the NC better control performance for a specific job. By adopting the new NC architecture call Soft-NC, all these implementions are made possible here, and especially large memory requirement which hinders their usage for many years is no longer barrier in their real world application.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.27-33
• /
• 1999

In order to regulate cutting force at a desired level during NC lathe process, a feedrate override Adaptive Control Constraint system was developed. Nonlinear model of the cutting process was linearized as an adaptive model with a time varing process parameter. Performance of the ACC system was confirmed on the NC lathe equipped with the developed NC system through a large amount of experiment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.3
• /
• pp.207-216
• /
• 1981

Recently in some nations, the interface of NC machine tool is by applying the softwired sequence control method which employs the PLE(Programmable Logic Controller) instead of the hardwired sequence control method. Due to this replacament, the funcion of the interface of NC machine tool has been improved in many respects. In order to accomplish such as improvement of the function of the interface and to develop the PLC, this paper deals with how to apply the sofrwired sequence control method that employs microcumputer to the interface of ATC(Automatic Tool Changer) which is a part of NC lathe.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.182-189
• /
• 2000

This paper presents the real time control method of 5-axis NC machine for high precision and productivity based on the curvature theory, of a ruled surface. The trajectory, of NC machine is described by, way of a ruled surface generated by the points on part surface and tool axis direction vector. The curvature theory, of a ruled surface is then applied to deter-mine the motion parameters of the 5-axis machine for control. The controller computes position, orientation, and differential motion parameters of the tool in each sampling period. The real-time approach produces smoother surfaces and requires substantially less machining time compared to conventional off-line approaches. The propose real-time control method based of the curvature theory of a ruled surface may give new methodology of precision 5-axis machine control.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.145-152
• /
• 2000

Some evolutional system has been used to promote the efficiency of the DNC(Direct Numerical Control) Controller. However, these are many inconvenience to this operator because it lacks harmony in interaction between the computer and the NC(Numerical Control) Controller. Also, there are some controversial points when data error occurs at the Data Input/Output. Accordingly, this paper explores a new Data Remote Control System. In this study, the NC Controller of the DNC network has to get full data by removing data error in this system. In this system, the main merits are easy manufacturing and the convenience of Data Input/Output. That is, remote control of the NC machine tool is possible without mutual interaction between the computer and itself.