• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.243-255
• /
• 1990

The objective of this study is to present an efficient measurement method of the effective thermal diffusivity for the fibrous insulation material. The non-linear parameter estimation (NPE) method is adapted for this analysis because of its accuracy and its results are compared with those by other direct methods such as CTP, CHP and STD method. A experimental system is constructed with bell-jar vaccum chamber, diffusion pump, tube type furnace, control unit and data acquisition system included with A/D converter and IBM XT/AT personal computer. The typical results obtained from this study are as follows; 1) NPE method can be recommended as an useful and accurate method to measure the effective thermal diffusivity of insuation material because it is shown that the measurement error compared with those by other direct methods is reduced for standard material, NBS-1450b. 2) NPE method can minimize the effects of ill-measured temperature due to external disturbance, because the final value is found by point to point estimating. 3) NPE method dose not depend on the kinds of heat flux, since the surfac temperature are used to estimate the thermal diffusivity. 4) With NPE method, compared with the steady state method, a measuring time and a sample size could be reduced.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.3
• /
• pp.179-186
• /
• 2009

The chemical composition of essential oil from the perennial herbaceous plants (Houttuynia cordata, Filipendula glaberrima, Peucedanum japonicum, and Ainsliaea acerifolia) was determined by GC/MS spectrometric analysis with the aid of NBS, Wiley Library and RI indice searches. The major constituents identified were $\alpha$-phellandrene (18.97%), $\gamma$-terpinene (12.32%), decanal (8.72%), 1-decanol (10.92%), decanoic acid (12.12%), and 2-undecanone (12.32%) from H. cordata, farnesol (2.83%), l-$\alpha$-terpineol (2.72%), benzenmethanol (2.03%), (Z)-3-hexen-1-ol (4.32%), and T-muurolol (2.07%) from F. glaberrima, $\alpha$-phellandrene (14.25%), endobornyl acetate (3.84%), heptanal (47.52%), octanal (2.65%), (E,E)-2,4-decadienal (2.75%), and octanoic acid (4.52%) from P. japonicum, and geyrene (9.74%), $\beta$-cubebene (11.15%), berkheyaradulen (22.32%), $\beta$-elemene (6.21%), (-)-A-selinene (4.85%), benzaldehyde (4.52%), and benzenacetaldehyde (3.40%) from A. acerifolia.

• Preventive Nutrition and Food Science
• /
• v.2 no.1
• /
• pp.71-76
• /
• 1997

Pullulanase was produced from the Klebisella pneumonias NFB_320 with the conmposition of 0.1% pullualn 1.5% yeast extract, 0.2% $K_2$HPO$_4$ and 0.02% MgSO$_4$.7$H_2O$(pH5.5). The optimum temperature for activity of the pulluanase was 3$0^{\circ}C$ and the highest yield of the enzyme was obtained after cell growth at 3$0^{\circ}C$ for 18hr, and maintained until 24hr cultivation. The pullulanase was successively purified 52.6 folds with 7.8% yield by acetone precipitation. DEAE-cellulose column chromatography and gel fitrations. The purified enzyme hydrolyzed pullulan into maltotriose exclusively. Chemical and physical properties of purified pullulanase from Klebisella pneumonias NFB-320 were examined. The optimum pH and temperature for enzyme activity were 5.0 and 6$0^{\circ}C$, respectively. The enzyme was stable between pH4 and 7, and up 5$0^{\circ}C$. The effect of mo-dification on the rate of enzyme reaction was studies with various chemicals and metal ions. The enzyme has been found to be inactivated by I$_2$ and N-bromosussinimide(NBS), which probably indicated the involve- ment of tryptophan residues in the active center of the enzyme.

• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.636-642
• /
• 1994

Essential amino acids involving in the catalytic mechanism of the $\beta$-D-xylosidase of Bacillus stearothermophilus were determined by chemical modification studies. Among various che- mical modifiers tested N-bromosuccinimide (NBS), $\rho$-hydroxymercurybenzoate (PHMB), N-ethylma- leimide, 1-[3-(di-ethylamino)-propyl]$-3-ethylcarbodi-imide (EDC), and Woodward's Reagent K(WRK)inactivated the enzyme, resulting in the residual activity of less than 20%. WRK reduced the enzyme activity by modifying carboxylic amino acids, and the inactivation reacion proceeded in the form of pseudo-first-order kinetics. The double-lagarithmic plot of the observed pseudo-first- order rate constant against the modifier concentration yielded a reaction order of 2, indicating that two carboxylic amino acids were essential for the enzyme activity. The $\beta$-D-xylosidase was also inactivated by N-ethylmaleimide which specifically modified a cysteine residue with a reaction order of 1, implying that one cysteine residue was important for the enzyme activity. Xylobiose protected the enzyme against inactivation by WRK and N-ethylmaleimide, revealing that carboxylic amino acids and a cysteine residue were present at the substrate-binding site of the enzyme molecule.

• The Plant Pathology Journal
• /
• v.19 no.1
• /
• pp.19-23
• /
• 2003

Turnip crinkle vims (TCV) inoculation onto resistant Arabidopsis ecotype Dijon（Di-17) leads to a hypersensitive response (HR) on the inoculated leaves. A dominant gene, HRT, which confers an HR to TCV, has been cloned from Di-17 plants by map-based cloning. HRT is a LZ-NBS-LRR class resistance gene and it belongs to a small gene family that includes RPP8, which confers resistance to Peronospora parasitica Emco5. Outside of the LRR region, HRT and RPP8 proteins share 98% amino acid identity while their LRR regions are less conserved (87% identity). HRT-transformed Arabidopsis plants developed an HR but generally remained susceptible to TCV due to a dominant RRT allele, which is not compatible with resistance. However, several transgenic plants that over-expressed HRT much higher than Di-l7 showed micro-HR or no HR when inoculated with TCV and were resistant to infection. Both the HR and resistance are dependent on salicylic acid but independent of NPRI, ethylene, or jasmonic acid. Arabidopsis plants containing both TCV coat protein gene and HRT developed massive necrosis and death in seedlings, indicating that the TCV coat protein is an avirulence factor detected by the HRT.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.154-154
• /
• 2013

In this work, we investigated the characteristics and the effects of light on the negative gate bias stress stability (NBS) in high mobility polycrystalline IGO TFTs. IGO TFT showed a high drain current on/off ratio of ${\sim}10^9$, a field-effect mobility of $114cm^2/Vs$, a threshold voltage of -4V, and a subthresholdslpe(SS) of 0.28V/decade from log($I_{DS}$) vs $V_{GS}$. IGO TFTs showed large negative $V_{TH}$ shift(17V) at light power of $5mW/cm^2$ with negative gate bias stress of -10V for 10000seconds, at a fixed drain voltage ($V_{DS}$) of 0.5V.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.367-376
• /
• 2011

In this paper, we propose self-organizing schemes for the initial configuration of the neighbor cell list (NCL), maintenance of the NCL, and physical cell identifier (PCI) allocation in heterogeneous networks such as long term evolution systems where lower transmission power nodes are additionally deployed in macrocell networks. Accurate NCL maintenance is required for efficient PCI allocation and for avoiding handover delay and redundantly increased system overhead. Proposed self-organizing schemes for the initial NCL configuration and PCI allocation are based on evolved universal terrestrial radio access network NodeB (eNB) scanning that measures reference signal to interference and noise ratio and reference symbol received power, respectively, transmitted from adjacent eNBs. On the other hand, the maintenance of the NCL is managed by adding or removing cells based on periodic user equipment measurements. We provide performance analysis of the proposed schemes under various scenarios in the respects of NCL detection probability, NCL false alarm rate, handover delay area ratio, PCI conflict ratio, etc.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.6
• /
• pp.1087-1097
• /
• 2016

An intracellular lipase from Anoxybacillus flavithermus HBB 134 was purified to 7.4-fold. The molecular mass of the enzyme was found to be about 64 kDa. The maximum activity of the enzyme was at pH 9.0 and 50℃. The enzyme was stable between pH 6.0 and 11.0 at 25℃, 40℃, and 50℃ for 24 h. The K_m and V_max of the enzyme for pNPL substrate were determined as 0.084 mM and 500 U/mg, respectively. Glycerol, sorbitol, and mannitol enhanced the enzyme thermostability. The enzyme was found to be highly stable against acetone, ethyl acetate, and diethyl ether. The presence of PMSF, NBS, DTT and β-mercaptoethanol inhibited the enzyme activity. Hg²⁺, Fe³⁺, Pb²⁺, Al³⁺, and Zn²⁺ strongly inhibited the enzyme whereas Li⁺, Na⁺, K⁺, and NH₄⁺ slightly activated it. At least 60% of the enzyme activity and stability were retained against sodium deoxycholate, sodium taurocholate, n-octyl-β-D-glucopyranoside, and CHAPS. The presence of 1% Triton X-100 caused about 34% increase in the enzyme activity. The enzyme is thought to be a true lipase since it has preferred the long-chain triacylglycerols. The lipase of HBB 134 cleaved triolein at the 1- or 3-position.

• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.202-206
• /
• 2018

Five solution styrene butadiene rubber/neodymium butadiene rubber (SSBR/NdBR) composites were manufactured using different ratios of SSBR and NdBR. In this study, the composites were reinforced with NdBR and silica to confirm the physical properties of SSBR used for treads of automobile tires and the dispersibility with silica. The morphologies of the rubber composites were observed using field-emission scanning electron microscopy (FE-SEM). The crosslinking behaviors of the composites were tested using a rubber process analyzer (RPA), and the abrasion resistances were tested using a National Bureau of Standards (NBS) abrasion tester. The hardness values, tensile strengths, and cold resistances of the composites were also tested according to ASTM standards. Increased NdBR content yielded composites with excellent crosslinking properties, abrasion resistances, hardnesses, tensile strengths, and cold resistances. The crosslinking point increased due to the double bond in NdBR, thereby increasing the degree of crosslinking in the composites. The NdBR-reinforced composites exhibited excellent abrasion resistances, which is explained as follows. In SSBR, a breakage is permanent because a resonance structure between styrene and SSBR forms when the molecular backbone is broken during the abrasion process. However, NdBR forms an additional crosslink due to the breakdown of the molecular backbone and high reactivity of the radicals produced. In addition, the low glass transition temperature (Tg) of NdBR provided the rubber composites with excellent cold resistances.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.674-680
• /
• 2022

In the present study, radiation shielding and protection ability of prepared Flyash-lime-Gypsum (FaLG) bricks has been studied in terms of energy exposure build up factors and dose parameters. The energy exposure build up factors of Flyash-lime-Gypsum (FaLG) bricks have been calculated for the energy range of 0.015 MeV-15 MeV and for penetration depth upto 40 mfp directly using a new and simplified Piecewise Linear Spline Interpolation Method (PLSIM). In this new method, the calculations of G.P fitting parameters are not required. The verification and accuracy of this new method has been checked by comparing the results of exposure build up factor for NBS concrete calculated using present method with the results obtained by using G.P fitting method. Further, the relative dose distribution and reduced exposure dose rate for various radioactive isotopes without any shielding material and with Flyash-lime-Gypsum (FaLG) bricks have been calculated in the energy range of 59.59-1332 keV. On the basis of the obtained results, it has been reported that the prepared Flyash-lime-Gypsum (FaLG) bricks possess satisfactory radiation shielding properties and can be used as environmentally safe storage facilities for low level nuclear waste.