• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.329-333
• /
• 2019

Solution-processed oxide thin-film transistors (TFTs) have garnered great attention, owing to their many advantages, such as low-cost, large area available for fabrication, mechanical flexibility, and optical transparency. Negative bias stress (NBS)-induced instability of sol-gel IGZO TFTs is one of the biggest concerns arising in practical applications. Thus, understanding the bias stress effect on the electrical properties of sol-gel IGZO TFTs and proposing an effective recovery method for negative bias stressed TFTs is required. In this study, we investigated the variation of transfer characteristics and the corresponding electrical parameters of sol-gel IGZO TFTs caused by NBS and positive bias recovery (PBR). Furthermore, we proposed an effective PBR method for the recovery of negative bias stressed sol-gel IGZO TFTs. The threshold voltage and field-effect mobility were affected by NBS and PBR, while current on/off ratio and sub-threshold swing were not significantly affected. The transfer characteristic of negative bias stressed IGZO TFTs increased in the positive direction after applying PBR with a negative drain voltage, compared to PBR with a positive drain voltage or a drain voltage of 0 V. These results are expected to contribute to the reduction of recovery time of negative bias stressed sol-gel IGZO TFTs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.769-772
• /
• 2014

The device reliability in amorphous InGaZnO under NBS(Negative Bias Stress) and hot carrier stress with different gate overlap has been characterized. Amorphous InGaZnO thin film transistor has been measured. and is channel $width=104{\mu}m$, $length=10{\mu}m$ with gate overlap $length=0,1,2,3{\mu}m$. The device reliability has been analyzed by I-V characteristics. From the experiment results, threshold voltage variation has been increased with increasing of the gate overlap length after hot carrier stress. Also, threshold voltage variation has been decreased and Hump Effect has been observed later with increasing of the gate overlap length after NBS.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.280-283
• /
• 2012

By inserting $H_2O$ treatment steps during atomic layer deposition of a ZnO layer, the turn-on voltage shift from negative bias stress (NBS) under illumination was reduced considerably compared to that of a device that has a continuously grown ZnO layer without any treatment steps. Meanwhile, treatment steps without introducing reactive gases, and simply staying under a low working pressure, aggravated the instability under illuminated NBS due to an increase of oxygen vacancy concentration in the ZnO layer. From the experiment results, additional oxidation of the ZnO channel layer is proven to be effective in improving the stability against illuminated NBS.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.1
• /
• pp.47-49
• /
• 2012

In this paper, we investigated the anomalous hump in the bottom gate staggered a-IGZO TFTs. During the positive bias stress, a positive threshold voltage shift was observed in the transfer curve and an anomalous hump occurred as the stress time increased. The hump became more serious in higher gate bias stress while it was not observed under the negative bias stress. The analysis of constant gate bias stress indicated that the anomalous hump was influenced by the migration of positively charged mobile interstitial zinc ion towards the top side of the a-IGZO channel layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.204.1-204.1
• /
• 2015

We studied the electrical properties and gate bias stress (GBS) stability of thin film transistors (TFTs) with multi-stacked InZnO layers. The InZnO TFTs were fabricated via solution process and the In:Zn molar ratio was 1:1. As the number of InZnO layers was increased, the mobility and the subthreshold swing (S.S) were improved, and the threshold voltage of TFT was reduced. The TFT with three-layered InZnO showed high mobility of $21.2cm^2/Vs$ and S.S of 0.54 V/decade compared the single-layered InZnO TFT with $4.6cm^2/Vs$ and 0.71 V/decade. The three-layered InZnO TFTs were relatively unstable under negative bias stress (NBS), but showed good stability under positive bias stress (PBS).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.154-154
• /
• 2013

In this work, we investigated the characteristics and the effects of light on the negative gate bias stress stability (NBS) in high mobility polycrystalline IGO TFTs. IGO TFT showed a high drain current on/off ratio of ${\sim}10^9$, a field-effect mobility of $114cm^2/Vs$, a threshold voltage of -4V, and a subthresholdslpe(SS) of 0.28V/decade from log($I_{DS}$) vs $V_{GS}$. IGO TFTs showed large negative $V_{TH}$ shift(17V) at light power of $5mW/cm^2$ with negative gate bias stress of -10V for 10000seconds, at a fixed drain voltage ($V_{DS}$) of 0.5V.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.126-126
• /
• 2018

최근 차세대 디스플레이인 flexible 하고 transparent 한 디스플레이 개발이 진행 중 이며, 이러한 디스플레이가 개발 되기 위해 백 플레인으로 사용되는 Thin Film Transistor (TFT) 또한 차세대 디스플레이 못지 않게 연구가 진행 되고 있다. 기존의 무기물을 기반으로 하고 Rigid한 TFT는 현재 많은 곳에 적용이 되어 사람들이 사용 하고 있다. 하지만 이미 시장은 포화상태이며 차세대 디스플레이 컨셉인 flexible 하고 투명한 것과 맞지 않는다. 그래서 유연하며 투명한 특성을 가진 TFT에 대한 연구가 활발히 진행 되고 있으며 많은 성과를 이루었다. 이러한 소자를 이용하여 훗날 Electronic-skin(e-skin)이라 부르는 전자 피부를 활용하여 실시간 모니터링 할 수 있는 헬스 케어 분야 등에 활용 가치 또한 높다. 현재 유연하며 투명한 기판 및 물질 개발에 많은 연구 개발이 진행 되고 있다. 하지만 유연한 기판을 사용하여 TFT를 제작한 후 stress나 bending에 대한 내구성과 안정성, 신뢰성 등이 무기물을 기반으로 한 TFT에 비해 좋지 않은 실정이다. 따라서 유연하며 투명한 기판을 사용한 TFT에 대한 안정성, 신뢰성 등을 확보하여야 한다. 본 연구 에서는 유연한 기판을 사용하여 TFT를 제작 한 후, TFT특성과 안정성을 확보하는 것을 목표로 실험을 진행하였다. 우리는 Mo전극과 Parylene 기판을 사용하여 유연한 TFT소자를 탑 게이트 구조로 제작 하였고 Rigid한 Glass기판 위에 Floating Process를 진행하기 위해 PVA층을 코팅 후 그 위에 Parylene을 CVD로 증착 하고 IGZO를 Sputter를 사용해 증착했다. Parylene은 DI Water 70도에서 Floating 공정을 통해 Rigid 기판에서 탈착 시켰다. 유연한 기판 위에 TFT를 제작 후 bending에 대한 특성 변화 및 안정성에 대한 측정을 실시하였다. Bending에 대한 특성 변화는 우수한 결과가 나왔지만 안정성 측정 중 Negative Bias Stress(NBS) 상에서 비정상적인 On Current Drop 현상이 발생 되었다. Parylene과 Channel층 사이 interface roughness로 인해 charge trap이 되고 이로 인해 On Current Drop 이라는 현상으로 나타났다. 그래서 우리는 Parylene 기판과 Channel 층간의 surface roughness를 개선하기 위한 방법으로 UV Treatment를 사용하였고 시간을 다르게 하여 surface 개선을 진행했다. Treatment 시간을 증가 시킴에 따라 Surface roughness가 많이 좋아 졌으며, Surface를 개선하고자 비정상적인 On Current Drop 현상이 없어졌으며 위 실험으로 Polymer의 surface roughness에 따라 TFT에 대한 안정성에 대한 신뢰성이 확보 될 수 있는 것을 확인 하였다.