• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.195-200
• /
• 1996

In this paper, to eliminate some selected harmonics, we implement PWM inverter which can be able to control in real-time. Using walsh function, which is one of the ordered orthogonal functions, we propose a new method to calculate firing angles, and implement logic circuits which can be calculate firing angles in real-time and be applicable to 1- and 3-phase circuits. Finally, using simulation circuits which accept the outputs obtained from the implemented logic circuits as the inputs, we confirmed the characteristics in steady state of the proposed method for PWM inverter.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.101-106
• /
• 1992

pH-ISFETs, the semiconductor pH sensors, were combined with immobilized enzyme membranes to prepare FET type urea and glucose sensors and its operational characteristics were investigated. Photolithography techniques were applied to immobilize enzymes on the $H^{+}$ sensing membrane of the pH-ISFET with photo-sensitive polymers, PVA-SbQ. Fabricated urea and glucose sensors could determine $0.5{\sim}50{\;}mg/dl$ urea concentrations and $10{\sim}1000{\;}mg/dl$ glucose concentrations, respectively.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.39-48
• /
• 2004

An IP address shortage problem is happening with a rapid propagation of the Internet and demands about a new IP address. Address translation technology as NAT is becoming use widely in order to solve these problems. NAT is an very useful If address translation technique that allows two connected networks to use different and incompatible IP address schemes. Rut it is difficult to use NAT particularly for applications that embeded IP addresses in data payloads or encrypted IP packet to guarantee End-to-End Security such as IPSec. In addition to rewiting the source/destination IP address in the packet, NAT must modify IP checksum every time, which could lead to considerablely performance decrease of the overall system in the process of address translation. RSIP is an alternative to solve these disadvantages and address shortage problems of NAT. Both NAT and RSIP divide networks into inside and outside addressing realms. NAT translates addresses between internal network and external network, but RSIP uses a borrowed external address for outside communications. RSIP server assigns a routable, public address to an RSIP client temporaily to communicate with public network outside the private network. In this paper, I will analyze NAT and RSIP gateway system, and then I will propose the Linux-based RSIP gateway for more efficient IP Address Translation in Intranet environments based on RSIP standard of IETF.

• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.40-46
• /
• 2005

A process variation compensation method called 'regulated drain detection' is proposed. This paper also shows the how this newly invented method is applied to a typical differential PLL. The proposed RDD(regulated drain detection) and its PLL application has been designed and tested in a $0.18{\mu}m$ 1-poly 3-metal plain digital process so that its stable performance and higher yield can be proven. The implemented PLL aimed to the operation range of 80MHz - 240MHz and the total die size is only $0.18{\mu}m$ including the internal loop filter. The tracking jitter characteristics is measured to less than 150 peak-to-peak under l.8V supply rail.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.187-195
• /
• 2001

A wireless telemetry measurement system, using ISFETs, was developed for environmental monitoring applications, industrial processes, medical treatments and so on. This system is composed of the measurement part located at remote site and a personal computer(PC) which control whole instrument process. The measurement part transmits measured data to the PC by RF transceiver, and transmitted data are analyzed and handled in the PC. Proposed system utilizing time division multiplexing for the transmission of 3channel ISFET signal. The measurement part has an identification number(ID) so that the PC controls many measurement parts separately. Experiments were performed using pH-ISFETs, and the implemented system operates well within designed specification and accuracy of 0.1 pH.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1315-1322
• /
• 1988

$SnO_X$/Pt thin film gas sensors were fabricated and their performance characteristics were measured. The $SnO_X$/Pt films were deposited by vacuum evaporating the $SnO_2$ target mixed with 2 wt% Pt. The conductivity showed the temperature dependence and the sensitivity to CO gas was proportional to the square root of gas concentration below 2000 ppm. The optimum operating temperature of the fabricated devices was about 300$^{\circ}$C and the response time in 5000 ppm CO gas was about 20 sec.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.319-322
• /
• 2010

본 논문에서는 저가의 비용으로 구축이 가능한 USB 인터페이스용 PC 카메라를 이용한다. 사람의 침입이나 사람의 움직임을 감시할 필요가 있는 장소에 카메라를 설치하여 영상을 계속 감시한다. 감시가 필요한 장소에 설치된 각 카메라의 영상에 변화를 저장하여 기록하는데 있어서, 비교적 적은 비용이 필요하다. 또한 감시가 필요한 장소를 보다 안전하고 정확하게 감시할 수 있는 무인 침입탐지시스템에 영상처리와 영상인식 기술을 이용하여 실시간 감시시스템을 구현한다. 구현한 시스템은 웹을 기반으로 다양한 원격지의 화상 자료의 신속한 전송, 정확성의 구현, 특정 움직임의 캡처 및 선택, 검색, 자동 움직임 감지 등의 장점을 제공한다. 또한 독자적 시스템을 제공하여 다수의 시스템을 영상 입력 서버로 이용이 가능하도록 하였다. 뿐만 아니라, 서버에 C/S 형태의 시스템도 함께 제공하여, 영상인식 모듈을 탑재할 수도 있다. 덧붙여 인터넷을 통한 자료의 전송기술 및 QoS 만족을 위한 자료의 압축 및 품질 향상 기술을 적용하여 원격 출력과 원격 전송이 가능하여 저장 장치의 유지 관리 및 설치면에서 많은 경제적 이점이 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.271-273
• /
• 2003

차세대 인터넷의 기반이 되고 있는 IPv6가 소개된 이후 IPv4 인터넷 세계에서 IPv6 네트워킹이 가능하게 되었다. 현재 IPv6 도입을 위한 시험망이 세계 각국에서 구축되고 있으며, 이러한 IPv6망을 인터넷 망에 연결하기 위한 IPv6로의 전이에 대한 연구가 활발하게 추진되고 있다. 성공적으로 IPv6 로 전환하기 위해 무엇보다 필요한 것이 기존에 동작되고 있는 IPv4 에서 IPv6 로의 자연스러운 이전을 지원해 주는 IPv6 전환 메커니즘이다. 본 논문에서는 이러한 IPv6 로의 전이 단계에서의 전환기법들 중 NAT­PT를 기반으로 한 양 방향 프로토콜 전환기법의 연구 및 실제 구축을 통한 NAT­PT의 기능에 대한 연구를 수행하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.99-107
• /
• 1989

This paper describes the KUI-LED (Kyungpook national University Intelligent CAD-Layout EDitor) which is a 2-dimensional graphics editor for IC mask layout. This system runs of IBM PC/AT with the ${\Omega}$/PC graphics board. It offers a sufficient set of facilities to do most kinds of layout. KUIC-LED is written in 'C' and 'Assembly' language.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.792-794
• /
• 2000

This paper describes the design and the analysis of electromagnetic system of Magnetic Switch using 2D parametric finite element method(EM-Pulse). Magnetic Switch is electrical equipment, which is widely used for switching on/off motors in industrial field. The transient state is simulated in order to calculate the response time of Magnetic Switch. The simulation is based upon a step-by-step integration of the electric circuit equations and the core movement. The contactor uses a permanent magnet for maintaining the closed state. The presented solution takes account of non-linear magnetic material property and spring force controlled by core position. The dynamic response of Magnetic Switch predicted by the simulation agrees closely with the required condition.