• 한국전산구조공학회논문집
• /
• 제30권5호
• /
• pp.445-452
• /
• 2017

본 연구에서의 날개 앞전은 날개의 공기역학적인 기능뿐만 아니라 조류 등의 외부의 손상을 줄 수 있는 것으로부터 날개 내부 구성요소를 보호하고 안전한 항공기 운항을 위한 반드시 필요한 구조 요소이다. 복합재 무인기의 날개 경량화를 위한 최적의 제작 모델을 비교 검토하였다. MSC. Patran/Nastran을 이용한 유한요소해석을 통하여 비틀림 하중의 변위 형상을 비교 확인하였으며, 각 모델들의 비틀림 강도 실험을 통하여 적층 유형, 두께 변화 및 형상 적용에 따른 경량화 성능 개선을 확인하므로써 소형 복합재 무인기 최적의 경량화 날개 앞전스킨의 형태를 제시하였다.

• 대한조선학회논문집
• /
• 제32권3호
• /
• pp.126-134
• /
• 1995

본 연구에서는 피로강도중 설계자의 입장에서 일차적으로 관심의 대상인 균열발생수명에 대하여 선박용 중형엔진의 크랭크축을 대상으로 피로강도평가를 수행하였다. 본 평가를 위하여 크랭크축에 대한 구조해석모델을 구성하고 작용하중을 선정하였고 구조해석을 통한 반복적 응답을 근거로 균열발생수명을 추정하였으며 이들의 수명분포상황을 제시하여 보았다. 균열발생수명의 추정에서 주로 사용되고 있는 몇가지 상관관계를 소개하고 이의 적용성에 대하여 언급하여 보았다. 본 해석을 위하여 PATRAN, NASTRAN 및 EMRC/NISA 등의 상용프로그램을 적극 활용하였다. 균열발생해석의 결과로서 아직 조선업계의 적용성이 활발치 못한 수명분포도를 제시하였으며 이로부터 일반구조해석에서의 응력분포도와 같은 방식으로 수명분포상황을 일목요연하게 파악할 수 있는 방법의 적용성을 타진하여 보았다.

• Structural Engineering and Mechanics
• /
• 제49권6호
• /
• pp.705-726
• /
• 2014

In general, cylindrically curved plates are used in ships and offshore structures such as wind towers, spa structures, fore and aft side shell plating, and bilge circle parts in merchant vessels. In a number of studies, it has been shown that curvature increases the buckling strength of a plate under compressive loading, and the ultimate load-carrying capacity is also expected to increase. In the present paper, a series of elastic and elastoplastic large deflection analyses were performed using the commercial finite element analysis program (MSC.NASTRAN/PATRAN) in order to clarify and examine the fundamental buckling and collapse behaviors of curved plates subjected to combined axial compression and lateral pressure. On the basis of the numerical results, the effects of curvature, the magnitude of the initial deflection, the slenderness ratio, and the aspect ratio on the characteristics of the buckling and collapse behavior of the curved plates are discussed. On the basis of the calculated results, the design formula was developed to predict the buckling and ultimate strengths of curved plates subjected to combined loads in an analytical manner. The buckling strength behaviors were simulated by performing elastic large deflection analyses. The newly developed formulations were applied in order to perform verification analyses for the curved plates by comparing the numerical results, and then, the usefulness of the proposed method was demonstrated.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.42-47
• /
• 2004

This paper describes basic structural design for the large floating crane barge of fixed undulation type. Structural analysis is performed to divide two parts because crane barge is composed two parts, crane part of jib boom back stay and back tower and barge part to support crane part. The structural strength for jib boom structure members are in compliance with JIS B 8821 and scantling of all barge structural members are in compliance with the requirement of KR (Korean Register of Shipping) Steel Barges and Rules for Classification of Steel Ships. For the structural analysis of large floating crane, MSC/NASTRAN & MSC/PATRAN software is used.

• 항공우주시스템공학회지
• /
• 제1권3호
• /
• pp.26-31
• /
• 2007

This paper addresses a method for structural optimum design of composite rotor blade. The basic model of a composite helicopter main rotor blade is designed and its parameters determining the structural/dynamic properties are studied. Through the investigation of flap/lag/torsional stiffness, the structural properties of the model are analyzed. In this study, helicopter rotor blades are analyzed by using VABS. The computer program VABS (Variational Asymptotic Beam Section Analysis) uses the variational asymptotic method to split a three-dimensional nonlinear elasticity problem into a two dimensional cross-sectional analysis and a one-dimensional nonlinear beam problem. This is accomplished by taking advantage of certain small parameters inherent to beam-like structures. In addition, the rotational stability of the blade is estimated by the frequency diagram from FE analysis(MSC.Patran/Nastran) to understand its vibrational property. From the result, design parameters to determine and optimize the properties of the model are presented.

• 수산해양기술연구
• /
• 제51권1호
• /
• pp.9-15
• /
• 2015

A Korean-designed cruiser class sailing yacht, based on the form of traditional yachts, has been developed. In this paper, structural design procedures for the yacht are studied. The scantling of structural members and loads is carried out based on the guidelines suggested by Australian Standard 4132-1993, the American Bureau of Shipping (ABS) and the International Organization for Standardization (ISO). Patran/Nastran finite element analysis is performed on models of the trial sailing boat, and from these results, the structural strength of the ship's hull is verified.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.13-18
• /
• 2001

This paper deals with finite element analysis for free vibration and forced sine vibration of Ka- and Ku- bend antenna structures using MSC/PATRAN/NASTRAN. The structures are designed to satisfy minimum resonance frequency requirement in order to decouple the dynamic interaction of the satellite with the spacecraft bus structure. From the forced sinusoidal vibration, we have observed output acceleration versus input in X-,Y- and Z- direction, based on base excitation using large mass method. The results of finite elements analysis can be used as the reference data for the experimental test of satellite antenna, resulting in the reduction of cost and time by predicting and complementing experimental data.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1244-1251
• /
• 2006

The objective of this paper is to get excitation forces of the engine at each of the brackets for the prediction of the vehicle interior noise by the powertrain. A powertrain geometry model is produced by CATIA and its FE model is made by MSC/Patran. A vibration mode analysis and a running mode analysis are experimentally implemented. After getting a satisfied MAC value by doing a correlation about a measured mode analysis value and analyzed value through MSC/Nastran software, all components are assembled through MSC/ADAMS software which is a dynamic analysis tool. We can predict the vibration of brackets which is the last points to occur the force of the engine combustion by analyzing the combustion force produced by engine mechanism.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.20-26
• /
• 2008

The nacelle cover and nosecone are made of composite materials, especially the stiffener is added in the nacelle cover in order to enhance it's stiffness. The nacelle cover consists of all three covers of left, right side cover and upper cover and each cover is connected with bolts. Also, the nacelle cover and nacelle frame are connected with bolts. The nacelle cover and nosecone have a important role to prevent the components of nacelle and rotor from external circumstances such as snow, rain and wind. Therefore, it is necessary to analyze and evaluate the strength and deformation for them in the design level. According to GL Wind Specifications, this paper shows the results that nacelle cover of 2MW wind turbine satisfy the strength and deformation throughout analysis using Patran/Nastran programs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.68-71
• /
• 2000

A tool holder system has been designed to measure cutting forces in diamond turning. This system includes a 3-component piezo-electric tranducer. In this research, tool holder system is modeled by considering the element dividing, material properties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of structure is simulated by MSC/NASTRAN, for the purpose of developing the effective design. In addition, tool holder system is verified by vibration test using accelerometer. This system will aid to the development of Fast Tool Servo.