• 한국식품위생안전성학회지
• /
• 제27권1호
• /
• pp.63-67
• /
• 2012

동물성 식품 유래 장구균의 항생제 내성은 내성균주 또는 내성 유전자가 먹이사슬을 통해 인체로 전달될 수 있다는 가능성 때문에 공중보건학적으로 중요하게 대두되고 있다. 본 연구는 원유 시료에서 분리된 장구균의 tetracycline에 대한 내성을 표현형 및 유전형 수준에서 분석하였다. 원유 시료에서 총 245주의 장구균을 분리하였으며 그 중 $E.$ $faecalis$ 가 199주로 전체의 81.2%를 차지 하였으며 그 외에 $E.$ $faecium$ 이 25주(10.2%), $E.$ $avium$ 이 7주(2.9%), $E.$ $durans$ 이 6주(2.5%), $E.$ $gallinarum$ 이 4주(1.6%), $E.$ $raffinosus$ 이 4주(1.6%)의 비율로 분리되었다. 분리 균주중 76.3%에 해당하는 187주가 tetracycline에 내성을 나타내었으며 내성균주의 83.4%에 해당하는 156주가 $tet$(M)을 26.7%에 해당하는 50주가 $tet$(S)를 16.1%에 해당하는 30주가 $tet$(L)을 3.2%에 해당하는 6주가 $tet$(M) + $tet$(L) + $tet$(S)의 3개의 유전자를 동시에 소유하고 있는 것으로 분석되었다.

• 한국축산식품학회지
• /
• 제42권2호
• /
• pp.225-239
• /
• 2022

As commensal colonizers in livestock, there has been little attention on staphylococci, especially non-aureus staphylococci (NAS), contaminating meat production chain. To assess prevalence of staphylococci in retail pork and slaughterhouse carcass samples in Korea, we collected 578 samples from Korean slaughterhouses (n=311) and retail markets (n=267) for isolation of staphylococci and determined antimicrobial resistance phenotypes in all the isolates. The presence of and prevalence of fusB-family genes (fusB, fusC, fusD, and fusF) and mutations in fusA genes were examined in fusidic acid resistant isolates. A total of 47 staphylococcal isolates of 4 different species (Staphylococcus aureus, n=4; S. hyicus, n=1; S. epidermidis, n=10; Mammaliicoccus sciuri, n=32) were isolated. Fusidic acid resistance were confirmed in 9/10 S. epidermidis and all of the 32 M. sciuri (previously S. sciuri) isolates. Acquired fusidic acid resistance genes were detected in all the resistant strains; fusB and fusC in S. epidermidis and fusB/C in M. sciuri. Multi-locus sequence type analysis revealed that ST63 (n=10, 31%) and ST30 (n=8, 25%) genotypes were most prevalent among fusidic acid resistant M. sciuri isolates. In conclusion, the high prevalence of fusB-family genes in S. epidermidis and M. sciuri strains isolated from pork indicated that NAS might act as a reservoir for fusidic acid resistance gene transmissions in pork production chains.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.857-858
• /
• 2006

In order to clarify the wear resistance as cutting tools, the effect of oxygen addition on oxidation behavior of the ${\beta}-Si_3N_4$ ceramics with 5 mass% $Y_2O_3$ and 2 or 4 mass% $Al_2O_3$ was investigated by performing oxidation tests in air at $1300^{\circ}$ to $1400^{\circ}C$ and cutting performance tests. From test results, we could conclude that the mechanical properties of ${\beta}-Si_3N_4$ ceramics depending on oxygen introduction are much effective on cutting performance improvements of ${\beta}-Si_3N_4$ ceramics.

• 한국수산과학회지
• /
• 제17권1호
• /
• pp.1-8
• /
• 1984

어구의 전저항에서 전개판과 끌줄의 항력을 뺀 나머지를 트로올 그물의 유체저항이라 보고, 그물의 유체저항과 연계상의 요소 및 예망속도와의 관계를 R_N=k\frac{d}{l}abv^n 라고 표현할때, 새바다호에서 사용하고 있는 각종 그물에 대한 k와 n의 값을 구한 결과는 다음과 같다. 1. 6폭짜리 그물에 2가닥의 그물목줄을 쓰는 형(A형)과 8폭짜리 그물에 3가닥의 그물목줄을 쓰는 형(B형)은 예망속도가 1.8m/sec 이상일때 k는 11, n는 1.8이었다. 2. 10폭짜리 그물에 3가닥의 그물목줄을 쓰는 형(C형)은 예망속도가 1.8m/sec이하일 때는 k는 12, n는 1.3이며, 예망속도가 1.8m,/sec 이상일 때 k는9, n는 1.9이였다. 3. 10폭짜리 그물에 4가닥의 그물목줄을 쓰는 형(D형)은 예망속도가 1.8m/sec 이하일 때는 k는 16, n는 1.0이고, 예망속도가 1.8m/sec 이상일 때는 k는9, n는 1.9이었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.438-444
• /
• 2000

We report the effects of etch process parameters on the ohmic contact formation in the plasma etching of GaN. Planar inductively coupled plasma system with $CH_4/H_2/Ar$gas chemistry has been used as etch reactor. The contact resistance and the specific contact resistance have been investigated using transfer length method as a function of RF bias power and %Ar gas concentration in total flow rate. AES(Auger electron spectroscopy) analysis revealed that the etched GaN has nonstoichiometric Ga rich surface and was contaminated by carbon and oxygen. Especially large amount of carbon was detected at the sample etched for high bias power (or voltage) condition, where severe degradation of contact resistance was occurred. We achieved the low ohmic contact of $2.4{\times}10^{-3} {\Omega}cm^2$ specific contact resistance at the input power 400 W, RF bias power 150 W, and working pressure 10mTorr with 10 sccm $CH_4$, 15 sccm H2, 5 sccm Ar gas composition.

• 열처리공학회지
• /
• 제12권1호
• /
• pp.9-20
• /
• 1999

The effect of post oxidation, water-quenched after holding in air for 5~420 seconds or cooling or furnace cooling, on corrosion resistance and phase formation characteristics of the surface layer of SM20C and SM45C carbon steels after gas nirtrocarbursing in the $NH_3-5%CO_2-N_2$ gas atmosphere at $580^{\circ}C$ for 3hours is studied. The compound layers of two steels consist of ${\varepsilon}-Fe_{2-3}N$, ${\gamma}^{\prime}-Fe_4N$ and $Fe_3O_4$, phases, however, the quantity of ${\gamma}^{\prime}-Fe_4N$ phase increases for the furnace cooled specimen compared to that of air cooling specimen. With increasing $NH_3$ content in the gas mixture and also increasing the keeping time in the air after gas nitrocarburising, the ${\varepsilon}-Fe_{2-3}N$ phase of compound layer increases, while the decreased current density recognizing the improvement of corrosion resistance are shown. the passive current density of SM45C steel is lower than that of SM20C steel at the same nitrocarburising conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.451-456
• /
• 2004

The Titanium has many superior characteristics Which are specific strength, heat resistance, corrosion resistance, organism compatibility, non-magnetic and etc. and their quantity are abundant this study performed turning operation of Ti-6Al-4V alloy using the TiAlN Coate Tool which treated PVD (Physical Vapor Deposition). Experimental works are also executed to measure cutting force, chip figuration and surface roughness for different cutting conditions. As a result of study. Tool wear was serious at over 100m/min of cutting speed and cutting condition was excellent at 1.0mm of cutting depth.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.658-662
• /
• 2001

Continuous fiber ceramic composites(CPCCs) having the advantages of ceramics resistance to heat, eroson can be applied in chemical reactors and engine. CFCCs has relatively high stiffness in spite of low weight. In particular, it exhibits greatly increased toughness, which serves to decrease its inherent damage characteristics of the brittle nature of monolithic ceramics. In this wort, tensile and flexural test for SCS6 fiber/ $Si_3N_4$ matrix composites were studied. An objective of this study is to obtain the basic quantities of mechanical properties for tension and flexural test and link these to the fracture resistance behavior. Then, we showed that wok of fracture concept was useful as a method for describing fracture restance behavior of CFCCs.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권10호
• /
• pp.495-499
• /
• 2004

Characteristics of ohmic Ni/Si/Ni contacts to n-type 4H-SiC are investigated systematically. The ohmic contacts were formed by annealing Ni/Si/Ni sputtered sequentially The annealings were performed at 950℃ using RTP in vacuum ambient and N₂ ambient, respectively. The specific contact resistivity(p/sub c/), sheet resistance(R/sub s/), contact resistance (R/sub c/) transfer length(L/sub T/) were calculated from resistance(R/sub T/) versus contact spacing(d) measurements obtained from TLM(transmission line method) structure. While the resulting measurement values of sample annealed at vacuum ambient were p/sub c/ = 3.8×10/sup -5/Ω㎠, R/sub c/ = 4.9 Ω and R/sub T/ = 9.8 Ω, those of sample annealed at N₂ ambient were p/sub c/ = 2.29×10/sup -4/Ω㎠, R/sub c/ = 12.9 Ω and R/sub T/ = 25.8 Ω. The physical properties of contacts were examined using XRD 3nd AES. The results showed that nickel silicide was formed on SiC and Ni was migrated into SiC. This result indicates that Ni/Si/Ni ohmic contact would be useful in high performance electronic devices.

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.137-143
• /
• 2005

CrSiN coatings of stepwise changing Si concentration were deposited on stainless steel by closed field unbalanced magnetron sputtering (CFUBM) system. Microstructure of the films due to the Si concentration is measured by XRD. The corrosion behavior of CrSiN coatings in deaerated $3.5\%$ NaCl solution was investigated by potentiodynamic test, electrochemical impedance spectroscopy (EIS) and surface analyses. The microstructure of CrSiN film depends on the Si concentration. When Si/(Cr+si) was under $11.7\%$, preferred orientation is defined at CrN(220), CrN(311) and $Cr_2N(111).$ The results of potentiodynamic polarization tests showed that the corrosion current density and porosity decreased with increasing Si/(Cr+si) ratio. EIS measurements showed that the corrosion resistance of Si-bearing CrN was improved by phase transformation of the film, which leads to increase of pore resistance and charge transfer resistance. At the Si(Cr+si) ratio of 20, the Si-bearing CrN possesses the best corrosion resistance due to the highest pore resistance and charge transfer resistance.