• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.17-18
• /
• 2011

Plasma in liquid phase has attracted great attention in the last few years by the wide domain of applications in material processing, decomposition of organic and inorganic chemical compounds and sterilization of water. The plasma in liquid is characterized by three main regions which interact each - other during the plasma operation: the liquid phase, which supply the plasma gas phase with various chemical compounds and ions, the plasma in the gas phase at atmospheric pressure and the interface between these two regions. The most complex region, but extremely interesting from the fundamental, chemical and physical processes which occur here, is the boundary between the liquid phase and the plasma gas phase. In our laboratory, plasma in liquid which behaves as a glow discharge type, is generated by using a bipolar pulsed power supply, with variable pulse width, in the range of 0.5~10 ${\mu}s$ and 10 to 30 kHz repetition rate. Plasma in water and other different solutions was characterized by electrical and optical measurements. Strong emissions of OH and H radicals dominate the optical spectra. Generally water with 500 ${\mu}S/cm$ conductivity has a breakdown voltage around 2 kV, depending on the pulse width and the repetition rate of the power supply. The characteristics of the plasma initiated in ultrapure water between pairs of different materials used for electrodes (W and Ta) were investigated by the time-resolved optical emission and the broad-band absorption spectroscopy. The deexcitation processes of the reactive species formed in the water plasma depend on the electrode material, but have been independent on the polarity of the applied voltage pulses. Recently, Coherent anti-Stokes Raman Spectroscopy method was employed to investigate the chemistry in the liquid phase and at the interface between the gas and the liquid phases of the solution plasma system. The use of the solution plasma allows rapid fabrication of the metal nanoparticles without being necessary the addition of different reducing agents, because plasma in the liquid phase provides a reaction field with a highly excited energy radicals. We successfully synthesized gold nanoparticles using a glow discharge in aqueous solution. Nanoparticles with an average size of less than 10 nm were obtained using chlorauric acid solutions as the metal source. Carbon/Pt hybrid nanostructures have been obtained by treating carbon balls, synthesized in a CVD chamber, with hexachloro- platinum acid in a solution plasma system. The solution plasma was successfully used to remove the template remained after the mesoporous silica synthesis. Surface functionalization of the carbon structures and the silica surface with different chemical groups and nanoparticles, was also performed by processing these materials in the liquid plasma.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.9-16
• /
• 2014

BACKGROUND: This study was conducted to investigate the effects of seeding timing and method of rye and/or hairy vetch on seasonal soil and foliar nutrient concentrations as well as fruit quality in a pesticide-free pear orchard. METHODS AND RESULTS: The treatments included as followed: single seeding of rye in September (Sep-Mono), November (Nov-Mono), and January (Jan-Mono), or mix seeding of rye+hairy vetch in November (Nov-Mix) and January (Jan-Mix), or sod culture as a control. Cover crops or vegetation was mown and mulched on the soil surface in April and May for two years. Nov-Mix treatment produced the highest dry matter weight of $12,070kg\;ha^{-1}$, with the lowest dry matter weight for sod culture ($6,520kg\;ha^{-1}$), following Jan-Mix ($7,030kg\;ha^{-1}$). Nov-Mix treatments increased potential amount of N, P, and K from the raw materials of the cover crops as well as improved soil physical properties. Nov-Mix treatments overall elevated soil pH, EC, organic matter, and $P_2O_5$ in May compared to other cover crop treatments or sod culture. The difference of the seasonal nutrient concentrations in leaves or fruit qualities were not consistently occurred amongst treatments. CONCLUSION: Nov-Mix treatments showed playing role in a substitute of a chemical fertilizer. Delayed seeding of cover crops such as Jan-Mix did not increase the potential dry matter production due to the short growing period, and the seeding time would affect the dry matter production of cover crops.

• Journal of the Korean Society for Library and Information Science
• /
• v.33 no.4
• /
• pp.17-27
• /
• 1999

The purpose of this these is aiming at making an investigation on the existing local publications which were including woodblock catalogs in the early Choson Dynasty and analysing the bibliographical matters. The overall findings of this study can be summarized as follows : First of all, publications contained in the woodblock catalogs are composed of 1292 titles. With the exclusion of 278 titles duplicated in Yongnamch' aekp'an-gi(221 titles) and Tong-gyongjapki(57 titles), there are one thousand fourteen titles in the woodblock catalogs in Kosach' waryo(989 titles) and Yongnamch' aekp'an-gi (25 titles). Secondly, publications which are included in woodblock catalog and being handed down to the present are composed of 160 titles. Excepting 43 titles which are duplicated in the woodblock catalogs containing Yongnamch' aekp'an-gi(33 titles) and Tong-gyongjapki(10 titles), there exist 117 titles. Thirdly, looking at the publications handed down to the present on the basis of location, 10 titles were published in five areas in Kangwon-do, 45 titles in 17 regions in Kyonsang-do, 33 titles in 10 areas in Cholla-do, 4 titles in 4 different areas in Chungchong-do two different areas in Pyongan-do, 1 titles in one area in Hamgyong-do, the other titles in three regions in Hwanghae-do.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1273-1279
• /
• 2016

Production of iodine-131 by neutron activation of tellurium in tellurium dioxide ($TeO_2$) material requires a target that meets the safety requirements. In a radiopharmaceutical production unit, a new lid for a can was designed, which permits tight sealing of the target by using tungsten inert gaswelding. The leakage rate of all prepared targets was assessed using a helium mass spectrometer. The accepted leakage rate is ${\leq}10^{-4}mbr.L/s$, according to the approved safety report related to iodine-131 production in the TRIGA Mark II research reactor (TRIGA: Training, Research, Isotopes, General Atomics). To confirm the resistance of the new design to the irradiation conditions in the TRIGA Mark II research reactor's central thimble, a study of heat effect on the sealed targets for 7 hours in an oven was conducted and the leakage rates were evaluated. The results show that the tightness of the targets is ensured up to $600^{\circ}C$ with the appearance of deformations on lids beyond $450^{\circ}C$. The study of heat transfer through the target was conducted by adopting a one-dimensional approximation, under consideration of the three transfer modes-convection, conduction, and radiation. The quantities of heat generated by gamma and neutron heating were calculated by a validated computational model for the neutronic simulation of the TRIGA Mark II research reactor using the Monte Carlo N-Particle transport code. Using the heat transfer equations according to the three modes of heat transfer, the thermal study of I-131 production by irradiation of the target in the central thimble showed that the temperatures of materials do not exceed the corresponding melting points. To validate this new design, several targets have been irradiated in the central thimble according to a preplanned irradiation program, going from4 hours of irradiation at a power level of 0.5MWup to 35 hours (7 h/d for 5 days a week) at 1.5MW. The results showthat the irradiated targets are tight because no iodine-131 was released in the atmosphere of the reactor building and in the reactor cooling water of the primary circuit.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.1
• /
• pp.75-82
• /
• 1997

건설기술과 산업의 발전에 따라 구조물은 대형화되어 가고, 건설공사의 급격한 팽창으로 골재 수용량이 급증함에 따라 천연골재자원은 점차 부족현상을 면치 못할 처지에 있다. 또한, 무리한 천연골재의 채취는 자연환경을 훼손시킬 뿐만 아니라 자연보호 측면에서도 심각한 공해문제로 대두되고 있어 공급량 부족현상은 날로 심화되고 있다. 이에 세계 몇몇 나라에세는 산업부산물을 이용한 골재 생산으로 공해예방과 폐기물 활용방법을 연구하고 있다. 산업부산물중 플라이 애쉬 생산량은 전 세계적으로 매년 약 2억여톤에 달하고 있으나 이중 일부만 활용되고 있는 실정이다. 이와같은 부산물을 활용하기 위한 일환으로 산업부산물인 PFA(Pulverized Fuel Ash)로 만든 인공경량골재의 년생산량이 영국은 600,000$m^3$, 미국은 300,000$m^3$이며, 매년 증가주세에 있다. 고성능 경량골재 콘크리트는 단위중량의 증가없이 내구성과 강도를 향상시켜 실용화 측면에서 경제적인 효과가 있으며, 플라이 애쉬로 만든 경량골재는 시멘트와의 친화력이나 접착면에서 우수한 것으로 알려져 있다. 본 시험에 사용한 골재는 플라이 애쉬로 만든 인공경량 조골재와 강모래이고, 결합제로서 프틀랜드 시멘트를 사용하였다. 부수적인 결합재로서는 플라이 애쉬, 슬래그, 실리카 흄을 사용하였으며, 고성능 경량골재 콘크리트를 개발코자 재령 28일과 180일의 압축강도가 각각 50MPa와 60MPa가 되도록 배합설계를 하였다. 본 연구에서는 플라이 애쉬, 슬래그, 시리카 흄과 같은 산업부산물을 혼입했을때 경량골재 콘크리트의 압축강도, 휨강도, 동탄성계수, 공극체적, 공극률, 단위중량, 공극 크기별 분포등의 변화를 실험적으로 구명하여 재반 구조용 콘크리트에 활용하기 위한 기초자료를 마련코저 한다.있어 특정한 발육단계의 난포 사망기전을 연구하기 어렵다. 또한 난포는 생체 내에서 다양한 호르몬을 동시에 분비하기 때문에 특정한 난소국부호르몬이 사망기전에 미치는 영향을 조사하기 힘든 점이 있다. 최근 들어 난포체외배양이 다양하게 개발되면서, 이러한 어려운 점을 극복할 수 있게 되었다. 본 논문은 각 발육단계의 난포를 절단해 체외배양하면서, apoptosis DNA 절단 현상을 이용하여 각종 난소국부 호르몬들이 난포발육단계별로 사망기전에 미치는 영향을 요약해 보였다. 난포는 발육하면서 점차 복잡한 호르몬 경로를 생존을 위해 필요로 한다. Prevulatory난포생존에 필요한 난소국부호르몬들은 early antral 단계의 난포에서는 그 미치는 영향이 감소되다가 preantral단계의 난포에서는 영향을 전혀 미치지 못했다. 단지 예외는 cGMP처리로써, 세포내 cGMP수준을 일정하게 유지시켜주는 것이 난포발육단계에 무관하게 생존에 중요한 인자로, 장래 연구는 난포 세포내의 cGMP수준을 조절하는 기작을 규명하는데 있을 것이다.인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.299-299
• /
• 2008

초전도 응용기기 개발을 위해 필수적인 초전도 박막선재는 길이방향으로 임계전류밀도가 균일한 것이 요구되고 있다. 전체 길이에 대해 가장 임계전류 밀도가 낮은 지점에서 선재의 특성이 제한되기 때문이다. 한편 초전도 박막선재의 경우 높은 임계전류 밀도와 함께 과전류 등의 사고발생시를 고려하여 안정화재를 반드시 초전도층 위에 구성하여야 한다. 고가의 은(Ag)을 두껍게 증착할 수 없으므로 보통은 구리도금 또는 솔더링으로 안정화재를 덧댄다. 본 연구에서는 초전도 박막선재의 대전류화와 길이방향의 전류 균일성 향상, 안정화 특성 항상 등의 목적으로 초전도 박막선재간 확산 접합을 시도하였다. 초전도 박막선재 제조 후 안정화재인 은을 증착 후 따로 구리도금이나 솔더링 없이 선재 2가닥을 서로 포개어서 열처리를 하였다. 이때 선재간의 충분한 확산접합을 위하여 선재를 둥근 SUS 디스크에 감고 외부에 다시 SUS판재로 감아서 열처리 도중 압력을 가하였다. 아울러 포개는 방법도 초전도층의 위치에 따라 3 가지로 하였으며 열처리 후 임계전류를 측정하였다. 각 선재한 가닥에 대한 임계전류는 77K에서 50~60 A 정도의 임계전류를 나타내었으며 선재를 접합한 경우 90~120A의 특성을 나타내었으며 특히 초전도층이 설마주보는 형태에서 가장 높은 임계전류 특성을 나타내었다.

• The Korean Journal of Pesticide Science
• /
• v.5 no.2
• /
• pp.1-12
• /
• 2001

A competitive indirect enzyme-linked immunosorbent assay (ci ELISA) for the organophosphorus insecticide acephate, O,S-dimethyl acetylphosphoramidothioate, was developed using a polyclonal antibody. Three different haptens mimicking the analyze and containing hexanoic acid moiety as a linker were synthesized, and then conjugated with the carrier proteins bovine serum albumin and keyhole limpet hemocyanin by the N-hydroxysuccinimide active ester method. Polyclonal antibodies raised against hapten-KLH conjugates in rabbits and the hapten-BSA conjugates as coating antigens were screened and selected for the assay in the homologous and/or heterologous ELISA system. The effects of various assay conditions, including blocking reagents, detergent content, organic solvents, pH, and preincubation of tile mixture of the polyclonal antibody and the analyze on the sensitivity were evaluated. The $IC_{50}$ value of acephate of 110 ng/mL was obtained in an optimized heterologous system using hapten-3-BSA as a coating antigen and a polyclonal antibody 8377, showing the detection range of 10-1000 ng/mL and the lowest detection limit of 4 ng/mL. The cross-reactivities of the structurally related insecticides, including methamidophos were less than 0.02%. These results indicate that the ELISA could be a convenient and alternative tool for monitoring acephate residues in agricultural products and environmental samples.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.501-507
• /
• 2005

Small intestinal submucosa (SIS) had been widely used as a biomaterial without immune rejection responses. SIS sponges prepared by crosslinking with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). SIS powders dissolved in $3\%(v/v)$ acetic acid aqueous solution for 48hrs and freeze-dried. EDC solution ($H_2O$ : ethanol = 5 : 95) as a crosslink agent was used in concentration of 100mM. In vitro, rat-BMSCs seeded in SIS sponges and induced the osteogenesis for 28 days. We have characterized the osteogenic potential of rat-BMSCs in SIS sponges by alkaline phosphatase activity(ALP), n assay, SEM and RT-PCR for osteogenic phenotype. In SEM, all morphology of SIS sponges was regular and showed interconnected pore structure. By RT-PCR analysis, we observed type I collagen expression. These results demonstrate osteogenic differentiation of rat-BMSCs. In conclusion, we confirmed that the morphology of surface, cross-section, and side of SIS sponges were highly porous with good interconnections between each pores, which can support the surface of cell growth, proliferation, and differentiation. This result indicates that SIS sponge is useful for osteogenesis of BMSCs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.72-72
• /
• 2000

ITO(Indium-Tin-Oxide)는 n-type 전도 특성을 갖는 산화물 반도체로서 가시광 영역에서의 높은 광투과율 및 낮은 전기 비저항을 나타내기 때문에 태양전지, 액정디스플레이(liquid crystal display), 터치스크린(touch screen) 등의 투명전극 재료, 전계 발광(electroluminescent) 소자, 표면발열체, 열반사 재료 등 다양한 분야에 응용되고 있다. 본 연구에서는 타겟 제작에 드는 비용을 줄이고, 타겟 이용의 효율성을 높이기 위해 기존의 세라믹 타겟 대신 분말 타겟을 사용하여 유리 기판 상에 ITO 박막을 DC magnetron sputtering법에 의해 제조하고, 열처리 온도 및 열처리 분위기에 따른 ITO 박막의 전기적 광학적 특성을 조사하였다. 열처리 온도가 10$0^{\circ}C$이하인 경우 열처리하지 않은 시편과 동일하게 In2O3의 (411)면에 해당하는 peak가 관찰되었다. 그러나 20$0^{\circ}C$의 온도로 열처리 할 경우 (411)면 peak의 세기는 상대적으로 감소하고 대신 이전에 나타나지 않았던 (222)면에 대응하는 peak 세기가 현저하게 증가함을 알 수 잇다. 이것은 ITO 박막의 경정성장이 열처리 전 (411)면 방향으로 이루어지나 20$0^{\circ}C$의 온도로 열처리 후 재결정화에 의해 (222)면 방향으로의 우선방위를 갖고 성장함을 의미한다. 또한 주로 높은 기판온도에서 관찰되었던 (211), (400), (411), (440), (622)면 등에 해당하는 peak가 나타남을 볼 수 있었다. 열처리 온도를 더욱 증가시킴에 따라 결정구조에는 큰 변화 없이 (222)면 peak 세기가 증가하였다. 한편 열처리 온도를 더욱 증가시킴에 따라 (222)면 peak 세기가 상대적으로 조금 감소할뿐 XRD회절 결과에는 큰 변화를 관찰할 수 없었다. 이러한 결과로부터 기판을 가열하지 않고 증착한 ITO 박막의 재결정화에 필요한 최소의 열처리 온도는 20$0^{\circ}C$이며, 그 이상의 열처리 온도는 ITO박막의 결정구조에 큰 영향을 미치지 않음을 알 수 있었다. 열처리 전 비저항은 1.1$\times$10-1 $\Omega$-cm 의 값을 가지거나 10$0^{\circ}C$의 온도로 열처리함에 따라 9.8$\times$102$\Omega$-cm 로 약간 감소하였다. 열처리 온도를 20$0^{\circ}C$로 높임에 따라 비저항은 급격히 감소하여 1.7$\times$10-3$\Omega$-cm의 최소값을 나타내었다. 열처리 온도가 10$0^{\circ}C$인 경우 가시광 영역에서의 광투과율은 열처리하지 않은 시편과 비교해 볼 때 약간 증가하였다. 열처리 온도는 20$0^{\circ}C$로 증가시킴에 따라 투과율은 크게 향상되어 흡수단 이상의 파장영역에서 90% 이상의 투과율을 나타내었다. 이러한 광투과율의 향상은 앞서 증착된 ITO 박막이 열처리 중 재결합에 의해 우선 성장 방위가 (411)면 방향에서 (222)면 방향으로 변화되었기 때문으로 생각된다. 그러나 열처리 온도를 20$0^{\circ}C$이상으로 증가시켜도 광투과율은 큰 변화를 나타내지 않았다.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.660-665
• /
• 2012

The purpose of this study was to use basic data of dental hygiene curriculum by comparing the rolling method and modified stillman method. Plaque measurement method, Q-ray examination of the clinical utilization value shall review. True experimental design is randomized controlled trial to the intervention group and the control group. Measurements are plaque control record (PCR; O'Leary index) measurements and Quantitative Light induced fluorescnece Digital (QLFD) shooting as a pre-test was conducted. Intervention group is modified stillman method, control group is rolling method. Intervention after 5 weeks, PCR measurement and QLFD shooting was carried out as a post-test. Rolling method and modified stillman method plaque reduction did not differ. Intervention before and after the results of the comparison showed reduced plaque score after brushing law education. Also, Plaque reduction differences were more pronounced modified stillman method than rolling method. PCR and QLFD values of the correlation was not confirmed but SPS Score and the lower value of the ${\Delta}R$ value of the correlation. Plaque of maturity tooth that are not observed visually.