• The Korean Journal of Ecology
• /
• v.27 no.3
• /
• pp.155-159
• /
• 2004

In order to gain a better understanding of how forests participate in the cycling of carbon, effects of nitrogen addition on soil respiration were investigated on the oak forest in Kongju, Korea. Study site was divided into control, treatment f and treatment 2 plots, with 5 replication in each plot. In each replicate of treatment 1 and treatment 2 were fertilized with ammonium nitrate (NH$_4$NO$_3$), 30 g/$m^2$ and 60 g/$m^2$, respectively. Soil respiration, soil temperature, ammonium-N and nitrate-N were measured during the experimental period. Ammonium-N and nitrate-N in Ta were higher than those in control and T$_1$. Ammonium-N and nitrate-N in top-soil and sub-soil decreased sharply in August after bi9 rainfall in July in T$_1$ and T$_2$, however, those in control plot increased. Soil respiration in T$_2$ Plot showed consistently higher than those in control and T$_1$ until the end of July. However, soil respiration was similar among the control, T$_1$ and T$_2$ in mid-August and September The amount of Co$_2$ released from soil respiration in control, T$_1$ and T$_2$ in mid-August was 8.0$\pm$0.4, 9.3$\pm$0.6 and 10.2$\pm$0.5 $\mu$mol$^{-1}$ ㆍm$^{-2}$ ㆍs$^{-1}$ , respectively. However, those in control, T$_1$ and T$_2$in mid-August was 13.0$\pm$0.4, 13.5$\pm$0.5, 13.3$\pm$0.6 $\mu$mol$^{-1}$ ㆍm$^{-2}$ ㆍ$^{-1}$ , respectively. The results suggest that nitrogen addition in this oak forest has a positive effect on soil respiration.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.374-379
• /
• 1997

The rate constants for the nucleophilic addition of thiophenol derivatives (p-OCH3, H, p-CH3, m-CH3, p-Br and p-NO2) to 4'-[N-(9-acridinyl)]-1'-(N-methanesulfonyl)-3'-methoxyquinonediimide (AMQD) were determined by ultraviolet spectrophotometer in water at 5 ℃, and rate equations which can be applied over a wide pH range were obtained. On the basis of pH-rate profile, Bronsted plot, adduct analysis, general base catalysis and substituent effect, a plausible mechanism of this addition reaction was proposed: Below pH 2.5, the reaction proceeded by the addition of thiophenol molecule to 6'-position of quinonoid after protonation at the acridinyl nitrogen. Above pH 6.2, the addition of sulfide anion to 6'-position of quinonoid was rate controlling. However, in the range of pH 3.0-6.0, these two reactions occured competively.

• Journal of Powder Materials
• /
• v.13 no.1 s.54
• /
• pp.10-17
• /
• 2006

Model experiment was introduced to obtain the formation of a core/rim structure by only liquid phase reaction in Ti(C, N)-based cermet alloys. Infiltrated Ti(C, N)-Ni, $MO_2C-Ni$, and TaC-Ni cermets were bonded to sandwiched specimen by heat treatment $1450^{\circ}C$ for 5hr. With nitrogen addition, both (Ti, Mo) (C, N) and (Ti, Ta) (C, N) rim structure was nucleated around comer of cuboidal Ti(C, N) core. However, equilibrium shapes of(Ti, Mo) (C, N) and (Ti, Ta) (C, N) rim were different possibly due to the effect of interface energy. The core/rim and rim! binder interfaces were parallel to each other with TaC addition, while rotated to each other with $MO_2C$ addition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.1039-1046
• /
• 2002

Co-flow axisymmetric laminar premixed flame of methane was used to study the influence of air temperature and $N_2$ addition on the flame structure, temperature field and emission characteristics. OH 2-D images and temperatures along the centerline were measured experimentally by PLIF and CARS techniques respectively to observe the influences of dilution and thermal effects of $N_2$ in the gas mixture. Also, the concentration of NOx was measured at each condition by gas analyser to see the suppression effect of N2 addition on NOx emissions. It was found that OH concentrations distribute widely as air temperature goes higher, while the effect of $N_2$ addition is not significant. But $N_2$ addition highly contributes to the flame front and NOx emissions which was argued to be due to the reduction of flame temperature. In accordance with experimental study, numerical simulation using CHEMKlN code was carried out to compare the temperature results with those acquired by CARS measurement, and we could find that there is good agreement between those results.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.230-237
• /
• 2006

The operational parameters and control strategies of a tertiary wastewater treatment process a biological filtration system were investigated. The biological filtration system consisted of a nitrification filter (Fiter 1) and a polishing filter with anoxic and aerobic parts (Filter 2). SS, T-C-BOD, and T-N in effluent were kept stable at less than 3, 5 mg/L, and 5 mgN/L, respectively, under a HRT in Filter (filter-bed) of 0.37~2.3 h. T-N at the outlet of Filter 2 were about 1~5 mgN/L under the condition of LV of 50~202 m/d. Methanol addition was controlled based on the COD/N ratio or McCarty's equation. Constant COD/N ratio control results in excess addition under large diurnal fluctuation of $NOx^--N$, and McCarty's equation can be used to add appropriate amount of methanol. Control of methanol addition by on-line nitrate measurement, control of aeration by on-line DO measurement, and control of backwashing by head loss measurement are successfully operated. These results proved that this process prove the easy-maintenance and cost-effectively treatment is attainable.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.325-326
• /
• 2006

Using $6wt%Y_2O_3-2wt%Al_2O_3$ as sintering additives and Si as a raw powder, the continuously porous in-situ $Si_2N_2O-Si_3N_4$ bodies were fabricated by multi-pass extrusion process and their microstructures were investigated depending on the addition of carbon (0-9wt%) in the mixture powder. The introduction of $Si_2N_2O$ fibers observed in the unidirectional continuous pores as well as in the pore-frame regions of the nitrided bodies can be an effective method in increasing the filtration efficiency. In the case of no carbon addition, the network type $Si_2N_2O$ fibers with high aspect ratio appeared in the continuous pores with diameters of 150-200 nm. However, in the case of 9wt% C addition, the fibers were found without any network type and had diameters of 200-250 nm.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.453-460
• /
• 1997

Sr-ferrite having magnetoplumbite structure is similar to Ba-ferrite in magnetic characteristics, but better magnetic characteristics for using motor application. To improve remanence magnetic flux density(Br) and coercive force(iHc), it is necessary that sintered ferrites must have high density and grain size less than 1 $\mu$m. By varying n values in SrO.nFe2O3 basic composition, calcination temperature, and BaO addition, Sr-ferrite powder and sintered specimen was prepared. The n values, calcination temperature, and BaO addition affected secondary phase formation, particle size, and particle shape. BaO addition enhanced Fe2O3 secondary phase and hexagonal shape particle. Fe2O3 phase reduced sintered density which greatly decreased Br.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.2
• /
• pp.83-92
• /
• 1999

GaN etching was performed using planar inductively coupled $Cl_2$-based plasmas and the effects of main process parameters on the characteristics of the plasmas and their relations to GaN etch rates were studied. Also, the GaN etch mechanism was investigated using a Langmuir probe and optical emission spectroscopy (OES) during the etching, and X-ray photoelectron spectroscopy (XPS) of the etched surfaces. The GaN etch rates increased with the increase of chlorine radical density and ion energy, and a vertical etch profile haying the etch rate close to 4000 $\AA$/min could be obtained. The addition of 10% Ar to $Cl_2$ gas increased the GaN etch rate and the addition of Ar (more than 20%) and HBr generally reduced the GaN etch rate. The GaN etch rate appeared to be more affected by the chemical reaction between Cl radicals and GaN compared to the physical sputtering itself under the sufficient ion bombardments to break GaN bonds.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.796-800
• /
• 2004

The structure of [Cu(tpen)]$(ClO_4)_2$ (tpen = N,N,N',N'-tetrakis(2-pyridylmethyl)-1,2-ethanediamine) has been identified by X-ray crystallography. The copper(II) ion is surrounded by two amine N atoms and three pyridine N atoms of the ligand, making a distorted trigonal-bipyramid. Among the six potential N donor atoms (two amine N and four pyridine N atoms), only one pyridine N atom remains uncoordinated. We examined structural changes on addition of $Cl^-$ to $[Cu(tpen)]^{2+}$(1). The addition of $Cl^-$ in methanol resulted in the formation of a novel dinuclear copper(II) complex $[Cu_2Cl_2(tpen)](ClO_4)_2{\cdot}H_2O$. The structure of the dinuclear complex was verified by X-ray crystallography. Each copper(II) ion in the dinuclear complex showed a distorted square planar geometry with two pyridine N atoms, one amine N atom and one $Cl^-$ ion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.332.2-332.2
• /
• 2016

Two dimensional transition-metal dichalcogenides (TMDs) semiconductors are attractive materials for optoelectric devices because of their direct energy bandgap and transparency. To investigate the feasibility of transparent p-n junctions, we have fabricated a p-n heterojunction consisting of p-type WSe2 and n-type MoS2 flakes since WSe2 and MoS2 with proper electrode metals exhibit p-type and n-type behaviors, respectively. These heterojunctions exhibits gate-tunable rectifying behaviors and photovoltaic effects (ECE ~ 0.2%) indicating that p-n junctions were formed. In addition, photocurrent and photovoltaic effects were observed under light illumination, which were dependent on the gate voltage. In addition, the photocurrent mapping images indicate that the photovoltaic effects comes from the junction area. Possible origins of gate-tunability are discussed.