• Bulletin of the Korean Mathematical Society
• /
• v.26 no.2
• /
• pp.169-173
• /
• 1989

Let V={(x,y,z):f=z$^{n}$ -npz+(n-1)q=0 for n .geq. 3} be a compled analytic subvariety of a polydisc in $C^{3}$ where p=p(x,y) and q=q(x,y) are holomorphic near (x,y)=(0,0) and f is an irreducible Weierstrass polynomial in z of multiplicity n. Suppose that V has an isolated singular point at the origin. Recall that the z-discriminant of f is D(f)=c(p$^{n}$ -q$^{n-1}$) for some number c. Suppose that D(f) is square-free. then we prove that by Theorem 2.1 .mu.(p$^{n}$ -q$^{n-1}$)=.mu.(f)-(n-1)+n(n-2)I(p,q)+1 where .mu.(f), .mu. p$^{n}$ -q$^{n-1}$are the corresponding Milnor numbers of f, p$^{n}$ -q$^{n-1}$, respectively and I(p,q) is the intersection number of p and q at the origin. By one of applications suppose that W$_{t}$ ={(x,y,z):g$_{t}$ =z$^{n}$ -np$_{t}$ $^{n-1}$z+(n-1)q$_{t}$ $^{n-1}$=0} is a smooth family of complex analytic varieties near t=0 each of which has an isolated singularity at the origin, satisfying that the z-discriminant of g$_{t}$ , that is, D(g$_{t}$ ) is square-free. If .mu.(g$_{t}$ ) are constant near t=0, then we prove that the family of plane curves, D(g$_{t}$ ) are equisingular and also D(f$_{t}$ ) are equisingular near t=0 where f$_{t}$ =z$^{n}$ -np$_{t}$ z+(n-1)q$_{t}$ =0.}$ =0.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.220-225
• /
• 2008

In this research, the P(VDF-TrFE) copolymer thin films were prepared by the physical vapor deposition and studied to their piezoelectric properties. In the case of a specimen produced by varying the deposition temperature from $260^{\circ}C$ to $300^{\circ}C$, its piezoelectric coefficient($d_{33}$) increased from 32.3pC/N to 36.28pC/N, and piezoelectric voltage coefficient($g_{33}$) from $793{\times}10^{-3}V{\cdot}m/N$ to $910.5{\times}10^{-3}V{\cdot}m/N$. On the basis of these experimental results, we concluded that the P(VDF-TrFE) copolymer thin film prepared at $300^{\circ}C$ showed the optimum piezoelectric properties. At the deposition temperature of $320^{\circ}C$, its piezoelectric coefficient(d33) decreased 25.3 pC/N and piezoelectric voltage coefficient($g_{33}$) $680{\times}10^{-3}V{\cdot}m/N$.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.44-50
• /
• 1994

In order to develop an effective extraction method of sea mustard, five different methods of boiling in 0.5% $Na_{2}EDTA(A)$, in 0.1 N HCI(B), in 0.5% $Na_{2}EDTA$ and 0.1 N HCI(C) and hydrolysis with two different polysaccharides-hydrolyzing enzymes of Celluclast(method D) and Ultrazyme(method E) prior to boiling in 0.5% $Na_{2}EDTA$ and 0.1 N HCI were studied. The highest yields of solids(63.14%) and protein(26.39%) from the extract were obtained by method D. The concentration of amino-N was significantly improved by method C(870 ppm) followed by method D(770 ppm), B(570 ppm) and A(480 ppm) compared to the control(270 ppm). Total free amino acids, mainly alanine, glutamic, and aspartic acids, were greatly increased by methods of A(8.88 mg%), D(4.14 mg%) and E(4.18 mg%) which were $2.5{\sim}5.1$ times higher than those in control(1.71 mg%). The sensory characteristics showed that extract D was significantly low in intensity of fishy odor and high in seaweed taste. Therefore, method D was suggested as the effective extraction method.

• Communications for Statistical Applications and Methods
• /
• v.12 no.3
• /
• pp.545-556
• /
• 2005

Hjort(1990) obtained the nonparametric Bayes estimator $\^{F}_{c,a}$ of $F_0$ with respect to beta processes in the random censorship model. Let $X_1,{\cdots},X_n$ be i.i.d. $F_0$ and let $C_1,{\cdot},\;C_n$ be i.i.d. G. Assume that $F_0$ and G are continuous. This paper shows that {$\^{F}_{c,a}$(u){\|}0 < u < T} converges weakly to a Gaussian process whenever T < $\infty$ and $\~{F}_0({\tau})\;<\;1$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.977-982
• /
• 2005

Al/AlN/n-type 6H-SiC (0001) MIS structures were prepared by AlN layers on vicinal 6H-SiC(0001) substrates with reactive RF magnetron sputtering method. The AlN films were annealed at $900^{\circ}C$, $N_2$ atmosphere lot 1 minutes showed the best result. With XRD analysis, AlN(0002) peak was clearly found. The typical dielectric constant value of the AlN film in the MIS capacitors was obtained as 8.4 from photo C-V. Also, the gate leakage current density of the MlS capacitor was $10^{-10}\;A/cm^2$ order within the electric field of 1.8 MV/cm. Finally, the amount of interface trap densities, $D_{it}$, was evaluated as $5.3\times10^{10}\;eV^{-1}cm^{-2}$ at (Ec-0.85) eV.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.169-174
• /
• 2015

In this research, pristine graphene was synthesized using methane ($CH_4$) gas, and N-doped graphene was synthesized using pyridine ($C_5H_5N$) liquid source by chemical vapor deposition (CVD) method. Basic optical properties of both pristine and N-doped graphene were investigated by Raman spectroscopy and XPS (X-ray photoemission spectroscopy), and electrical transport characteristics were estimated by current-voltage response of graphene channel as a function of gate voltages. Results for CVD grown pristine graphene from methane gas show that G-peak, 2D-peak and C1s-peak in Raman spectra and XPS. Charge neutral point (CNP; Dirac-point) appeared at about +4 V gate bias in electrical characterization. In the case of pyridine based CVD grown N-doped graphene, D-peak, G-peak, weak 2D-peak were observed in Raman spectra and C1s-peak and slight N1s-peak in XPS. CNP appeared at -96 V gate bias in electrical characterization. These result show successful control of the property of graphene artificially synthesized by CVD method.

• Journal of the Korean Magnetic Resonance Society
• /
• v.15 no.2
• /
• pp.115-127
• /
• 2011

A newly developed cost-effective approach to prepare $^{15}N/^{13}C$-labeled protein for NMR studies is presented. This method has been successfully applied to isotopically labeling of PTK6 SH2 domain and MTH 1880 protein. The production method generates cell density using a growing media containing $^{15}NH_4Cl$, $^{12}C_6$-D-glucose. Following a doubling time period for unlabeled metabolite exhaustion and then addition $^{13}C_6$-D-glucose into a M9 growing media, the cells are induced. Our results demonstrate that in order to get full incorporation of $^{13}C$, the isotopes are not totally required during the initial growth phase before induction. The addition of small amounts of $^{13}C_6$-D-glucose to the induction phase is sufficient to obtain more than 95% incorporation of isotopes into the protein. Our optimized protocol is two-thirds less costly than the classical method using $^{13}C$ isotope during the entire growth phase.

• Biomolecules & Therapeutics
• /
• v.15 no.4
• /
• pp.266-272
• /
• 2007

A rapid analytical method was developed to quantify very long-chain fatty acids (VLCFAs, C22:0, C24:0, C26:0) in human plasma with good sensitivity and specificity using tert-butyldimethylsilyl (TBDMS) derivatization and stable isotope GC-MS selective ion monitoring (GC-MS/SIM). Two-hundred and fifty ${\mu}L$ of plasma was fortified with deuterated stable isotope internal standards (d3-C22:0, d3-C24:0, d3-C26:0) and standard mixtures of chloroform and methanol, and then extracted with hexane and acetonitrile. To upper layer of liquid-liquid-extraction, N-(t-Butyldimethylsilyl)-N-methyltrifluoroacetamide was added and then heated to $60^{\circ}C$ for 30 min to produce the TBDMS derivatives. Derivatives of VLCFAs were analyzed by GC-MS/SIM. Calibration curves showed a linear relationship for the target compounds in the concentration range of $10^{-4}{\sim}2{\times}10^3\;{\mu}g/mL$ with the correlation coefficient ranging from 0.996 to 0.999. The limit of quantification for the plasma was $10^{-4}{\sim}2{\times}10^{-4}\;{\mu}g/mL$ (S/N=3). When applied to the plasma specimens of patients with peroxisomal disorder, X-linked adrenoleucodystropy (ALD, Mckusick 202370), the method clearly differentiated normal subjects from ALD patients. The C24:0/C22:0 and C26:0/C22:0 ratios were significantly elevated in the plasma of patients with X-linked ALD compared to normal subjects. The new developed method might be useful for a rapid and sensitive diagnosis of X-linked ALD and other peroxisomal disorders.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.197-200
• /
• 2001

In this letter, we report on the investigation of Ni/Si/Ni Ohmic contacts to n-type 4H-SiC. Ohmic contacts have been formed by a vacuum annealing and $N_2$ gas ambient annealing method at $950^{\circ}C$ for 10 min. The specific contact resistivity ( $\rho_{c}$ ), sheet resistance($R_s$), contact resistance($R_c$), transfer length($L_T$) were calculated from resistance($R_T$) versus contact spacing(d) measurements obtained from 10 TLM(transmission line method) structures. The resulting average values of vacuum annealing sample were $\rho_{c}=3.8{\times}10^{-5}\Omega cm^{3}$, $R_{c}=4.9{\Omega}$, $R_{T}=9.8{\Omega}$ and $L_{T}=15.5{\mu}m$, resulting average values of another sample were $\rho_{c}=2.29{\times}10^{-4}\Omega cm^{3}$, $R_{c}=12.9{\Omega}$ and $R_{T}=25.8{\Omega}$. The physical properties of contacts were examined using X-Ray Diffraction and Auger analysis, there was a uniform intermixing of the Si and Ni, migration of Ni into the SiC.

• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.301-308
• /
• 2004

Three types of parylene (PA-N, PA-C, PA-D) were used for coating the surface on natural latex rubbers in order to improve surface characteristics including mechanical properties and biocompatibility. The parylene coating was the CVD (chemical vapor deposition) method, and the surface properties of the modified latex were measured. Annealing effects on the mechanical properties of the coated latex were also investigated. The adhesion between latex and parylene was good for all the types of parylene used. As annealing temperature was increased, latex modified with PA-N became more hydrophobic, while the latex treated with PA-C and PA-D became more hydrophilic. As the annealing temperature was raised, the tensile strength was increased, and the elongation was decreased. The biocompatibility was noticeably improved on the latex surface modified with the parylenes through CVD method.