• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1424-1427
• /
• 2002

This paper proposes a novel postprocessing algorithm for reducing the blocking artifacts in low bit rate block-based transform coded images, that use adaptive neural network filter (NNF) in wavelet transform domain. n this algorithm, after performing a 2-level wavelet transform of the decompressed image, the existence of locking artifacts is determined using statistical characteristic of neighborhood blocks. And then a different one-dimensional (1-D) or 2-D NNF is used to reduce the locking artifacts according to the classified regions. That is, for HL and LH subbands regions with the blocking artifacts, a different 1-D NNF is used. And 2-D NNF is used in HH subband. Experimental results show that the proposed algorithm produced better results than those of conventional algorithms both subjectively and objectively.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.664-671
• /
• 2002

고속으로 압축변환을 하기 위해 DCT(Discrete Cosine Transform) 영역에서 영상의 해상도를 줄이는 MPEG-2 복호기를 제안한다. 제안하는 복호기는 움직임 보상을 하기 전에 DCT 영역에서 영상의 해상도를 줄이며 해상도가 줄어든 영상에 대해서 DCT 영역에서 움직임 보상을 수행한다. 본래 해상도의 영상 (N${\times}$CN)에서는 1/2화소 정밀도의 움직임 보상을 해야 하지만 해상도가 반으로 줄어든 영상(N/2${\times}$N/2)에 대해서는 1/4화소 정밀도의 움직임 보상을 수행해야 한다. 하지만 해상도가 줄어든 영상에 대해 1/4화소 정밀도의 움직임 보상을 수행하면 영상이 흐릿해지는 현상이 발생할 수 있다. 본 논문에서는 해상도를 줄인 영상에 대해 계산시간 뿐만 아니라 DCT 영역에서의 움직임 보상 시에 발생 할 수 있는 흐려짐도 줄일 수 있는 방법을 제안한다. 실험 결과는 제안한 방법이 높은 해상도의 영상을 낮은 해상도의 영상으로 효율적으로 복호할 수 있는 알고리즘이라는 것을 보여준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.760-765
• /
• 1992

In this paper, robust adaptive control algorithms which can be applied to unknown uncertain systems are suggested. Transform matrix for dividing states into "uncontrolled" states and "controlled" states and general searching procedure for the transform matrix which assign arbitrary n-1 eigen values for the uncontrolled subsystem of n-th order single-input single-output systems is also studied and utilized for the design of new-type controllers. We derived new-type control laws by using adaptive control theory and variable structure system and its stability is proved by using Lyapunov stability theory. From computer simulation results, we can see that the proposed adaptive control algorithm is robust and stable.s robust and stable.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.6-12
• /
• 2019

An IE-FFT algorithm is implemented and applied to the electromagnetic (EM) solution of perfect electric conducting (PEC) scattering problems. The solution of the method of moments (MoM), based on the magnetic field integral equation (MFIE), is obtained for PEC objects with closed surfaces. The IE-FFT algorithm uses a uniform Cartesian grid to apply a global fast Fourier transform (FFT), which leads to significantly reduce memory requirement and speed up CPU with an iterative solver. The IE-FFT algorithm utilizes two discretizations, one for the unknown induced surface current on the planar triangular patches of 3D arbitrary geometries and the other on a uniform Cartesian grid for interpolating the free-space Green's function. The uniform interpolation of the Green's functions allows for a global FFT for far-field interaction terms, and the near-field interaction terms should be adequately corrected. A 3D block-Toeplitz structure for the Lagrangian interpolation of the Green's function is proposed. The MFIE formulation with the IE-FFT algorithm, without the help of a preconditioner, is converged in certain iterations with a generalized minimal residual (GMRES) method. The complexity of the IE-FFT is found to be approximately $O(N^{1.5})$and $O(N^{1.5}logN)$ for memory requirements and CPU time, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.50-50
• /
• 2011

The aluminum nitride films were prepared by RF magnetron sputtering using an AlN ceramic target. The crystallinity, grain size, Al-N bonding and thermal conductivity were investigated in dependence on the plasma power densities (4.93, 7.40, 9.87 W/$cm^2$) during sputtering. High thermal conductivity is important properties of A1N passivation layer for functioning properly in thermal inkjet printhead. The crytallinity, grain size, Al-N bonding formation and chemical composition were observed using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), respectively. The AlN thin film was changed from amorphous to crystalline as the power density was increased, and the largest grain size appeared at medium power density. The near stoichiometry Al-N bonding ratio was acquired at medium power density. So, we know that the AlN thin film had better thermal conductivity with crystalline phase and near stoichometry Al-N bonding ratio at 7.40 W/$cm^2$ power density.

• Tribology and Lubricants
• /
• v.19 no.2
• /
• pp.72-77
• /
• 2003

Chitosan derivatives, Fluorinated chitosan, and N,N,N-Trimethyl chitosan iodide were synthesized as the disperse phases for the electrorheological fluid. The synthesis of these materials were confirmed by Fourier transform infrared spectroscopy (FT-lR). Chitosan derivative suspensions showed ER effect under the electric field. Especially, N,N,N-Trimethyl chitosan iodide suspension showed better electrorheological and electric properties than Fluorinated chitosan. It is due to difference in electron strength of polar groups composed derivatives. N,N,N-Trimethyl chitosan iodide suspension exhibited a linear dependence on an electric field power of 2.07.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.708-711
• /
• 1999

MDCT( Modified Discrete Cosine Transform ) is one of the most compute-intensive operations in the MPEG audio coding standard. In this paper a fast algorithm to perform MDCT operation is presented. The algorithm presented in the MPEG audio coding standard requires (N/2) $\times$ N multiplications and (N/2) $\times$ (N-1) additions to generate the result, but the algorithm presented in this paper requires (N/2) $\times$ (N/2) multiplications and (N/2) $\times$ (N/2) additions to perform the same task. In this algorithm N should be multiple of 4. The algorithm was implemented using ARM processor and the processing time comparison between the original algorithm and the fast algorithm is presented.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.59-68
• /
• 2000

This paper proposes efficient VLSI architectures for computation of the 2- D discrete wavelet transform (DWT). The two proposed VLSI architectures for the 2- D DWT are constructed based on block-based computation Each $M{\times}N$ ($N{\times}M$) block DWT is performed along the row (column) direction simultaneously, where M and N denote the number of filter taps and the number of columns (rows), respectively The proposed architectures compute the lowpass and highpass output sequences of the 1 - DWT along the row and column directions using a single architecture In alternate clock cycles Therefore the extra processing units required for the proposed architectures are much smaller than those of the conventional architectures They are modeled In very high speed Integrated circuit hardware description language (HIDL) and Simulated to show their functional validity.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.777-783
• /
• 2013

We used dipodal type bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to modify silica nanoparticles to introduce secondary amino groups on the silica surface. These grafted N-H groups were reacted with glycidyl methacrylate (GMA) to introduce polymerizable methacrylate groups on the silica surface. After modification reaction, we used several analytical techniques such as Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state $^{13}C$ cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to analyze the effects of reaction time, reaction temperature and used GMA concentration on the modification degree between N-H groups on the silica surface and epoxide groups of GMA. We found increased introduction of methacrylate groups on the silica surface by ring opening reaction of epoxide groups of GMA with N-H groups on BTMA treated silica with increased reaction time, reaction temperature and used GMA concentration within our experimental conditions.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.5
• /
• pp.1117-1127
• /
• 2019

Let ${\mathcal{L}}_2=(-{\Delta})^2+V^2$ be the $Schr{\ddot{o}}dinger$ type operator, where nonnegative potential V belongs to the reverse $H{\ddot{o}}lder$ class $RH_s$, s > n/2. In this paper, we consider the operator $T_{{\alpha},{\beta}}=V^{2{\alpha}}{\mathcal{L}}^{-{\beta}}_2$ and its conjugate $T^*_{{\alpha},{\beta}}$, where $0<{\alpha}{\leq}{\beta}{\leq}1$. We establish the $(L^p,\;L^q)$-boundedness of operator $T_{{\alpha},{\beta}}$ and $T^*_{{\alpha},{\beta}}$, respectively, we also show that $T_{{\alpha},{\beta}}$ is bounded from Hardy type space $H^1_{L_2}({\mathbb{R}}^n)$ into $L^{p_2}({\mathbb{R}}^n)$ and $T^*_{{\alpha},{\beta}}$ is bounded from $L^{p_1}({\mathbb{R}}^n)$ into BMO type space $BMO_{{\mathcal{L}}1}({\mathbb{R}}^n)$, where $p_1={\frac{n}{4({\beta}-{\alpha})}}$, $p_2={\frac{n}{n-4({\beta}-{\alpha})}}$.