• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.31-36
• /
• 1989

In order to synthesize AlN-polytypes from AlN-SiO2-Al2O3 system, composition A (AlN/SiO2/Al2O3=1/0.3/0.05, mole ratio) and composition B(AlN-SiO2-Al2O3=1/0.2/0.05, mole ratio) were used. AlN-polytypes were produced by nitriding the mixture at 175$0^{\circ}C$~190$0^{\circ}C$ under N2 atmosphere. For lower reaction temperature, 15R phase was produced and in the case of higher reaction temperature, AlN phase was only produced. As each composition was heated at 185$0^{\circ}C$ in N2 atmosphere, produced main phases were 15R phase for composition A and 21R phase for composition B respectively. The fracture surfaces of produced reactants showed porous skeleton structure.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.242-247
• /
• 1998

Hydrogenated amorphous carbon nitride[a-C:H(N)] films were deposited on p-type Si(100) at room temperature with bias voltage of 200 V by DC saddle-field plasma-enhanced chemical vapor deposition. Effects of the ratio of $N_2$ to $CH_4$($N_2/CH_4$), in the range of 0 and 4 on such properties as optical properties, microstucture, relative fraction of nitrogen and carbon, etc. of the films have been investigated. The thickness of the a-C:H(N) film was abruptly decreased with the addition of nitrogen, but at $N_2/CH_4$>0.5, the thickness of the film gradually decreased with the increase of the $N_2/CH_4$. The ratio of N to C(N/C) of the films was saturated at 0.25 with the increase of $N_2CH_4$. N-H, C≡N bonds of the films increased but C-H bond decreased with the increase of $N_2CH_4$.Optical band gap energy of the film decreased from 2.53 eV at the ratio of $N_2CH_4$=4.

• Journal of Korean Vacuum Science & Technology
• /
• v.1 no.1
• /
• pp.24-29
• /
• 1997

Surface morphologies and fundamental characteristics of molybdenum nitride films deposited by reactive dc magnetron sputtering were studied for application to Cu diffusion barrier. A phase transformation from Mo to $\gamma$-Mo$_2$N phase at 0.5$N_2$ flow ratio.($N_2$/(Ar+$N_2$)) equal to and larger than 0.2, whereas a second phase transformation to $\gamma$-MoN phase at 0.5 N2 flow ratio, With the variation of the N2 ratio the surface morphologies of the films were generally smooth except the cases of 0.2 and 0.3$N_2$ gas rations, where build-up of film stresses occurred. $\gamma$-Mo$_2$N film was found to crystallize at the deposition temperature of 40$0^{\circ}C$. The surfaces of $\gamma$-Mo$_2$N films deposited up to 40$0^{\circ}C$ were smooth, but the film deposited at 50$0^{\circ}C$ had very rough surface morphology. It seems that this was due to the building-up of thermal stresses at the high deposition temperature, which might lead to hillock formation.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.10
• /
• pp.1200-1204
• /
• 1999

The reactions of Ru(tpy)Cl3 (tpy = 2,2';6',2"-terpyridine) with new N,N,C-terdentate ligands, 3,2'-annulated-6-(2"-pyridyl)-2-phenylpyridines (1, HL) and the properties of their Ru(II) complexes are described. The distribution ratio of the two possible Ru(II) complexes, a pentaaza-coordinated complex [Ru(tpy)(1-N,N')Cl]+ and a cycloruthenated complex [Ru(tpy)(La-N,N',C)]+ are highly dependent on the length of the polymethylene unit. The trimethylene bridge of the N,N,C-terdentate in pentaaza-coordinated complex is rigid enough to induce an asymmetry in the complex.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.365-371
• /
• 1994

The effects of ratios of initial concentration of carbon source to the initial concentration of nitrogen source in the fermentation media on both the yields of PHB fermentation variables and the accumulation of poly-${\beta}$-hydroxybutyric acid(PHB) were investigated. The fermentation media were composed of the combination of varing glucose concentrations, 10, 20, 25, 30, 40, $50g/\ell$ and the NH4Cl concentrations 0.33, 0.4, 0.5, 1.5, 3, $5g/\ell$. The yield of biomass on glucos, Yx/s, decreased very slowly according to the increase of the ratio of C to N. And the yield became constant at 0.35(g biomass/g glucose) with the ratio higher than 70. The yield of residual biomass, Yx/s, also decreased with the ratio of C to N and finally showed a constant value of 0.065(g residual biomass/g glucose) when the ratio was higher than 65. In accordance with the augmentation of the ratio, the yield of PHB, YPHB/S, however, increased and showed the maximum value of 0.35 (g PHB/g glucose) between 40 and 60 of the ratio. The maximum yield of PHB to the change of biomass, YPHB/S, was 0.87(g PHB/g biomass), and the yie1d YPHB/RX, was 4.2(g PHB/g residual biomass). The maximum accumulation percent of PHB to the final biomass was 81% when the ratio was higher than 67.

• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.240-244
• /
• 2006

In this paper, magnetic properties and annealing behavior of spin valve structures using Mo(MoN) layers as underlayers were studied varying the thickness of the underlayers. The spin valve structure was consisted of Si substrate/$SiO_2(2,000{\AA})/Mo(MoN)(t{\AA})/NiFe(21\;{\AA})/CoFe(28\;{\AA})/Cu(22\;{\AA})/CoFe(18\;{\AA})/IrMn(65\;{\AA})/Ta(25\;{\AA})$. Also, MoN films were deposited on Si substrates and their thermal annealing behavior was analyzed. The resistivity of the MoN film increased as the $N_2$ gas flow rate was increased. After annealing at $600^{\circ}C$, XRD results did not show peaks of silicides. XPS results indicated MoN film deposited with 5 sccm of $N_2$ gas flow rate was more stable than the film deposited with 1 sccm of $N_2$ gas flow rate. The variations of MR ratio and magnetic exchange coupling fold were small for the spin valve structures using Mo(MoN) underlayers up to thickness of45 ${\AA}$. MR ratio of spin valves using MoN underlayers deposited with various $N_2$ gas flow rate was about 7.0% at RT and increased to about 7.5% after annealing at $220^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased to about 3.5%. Variation of $N_2$ gas flow rate up to 5 sccm did not change the MR ratio and $H_{ex}$ appreciably.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.148-155
• /
• 2004

Response surface analysis was used to study dietary ratios of n-3/n-6 fatty acid and P/S to minimize plasma triglycerides, total cholesterol and LDL ${\cdot}$ VLDL-C levels and maximize plasma HDL ${\cdot}$ C levels of rats. Because the dietary components were not statistically independent, they were studied in combinations of two variables. The two-variable combinations were the most useful in locating the desired maximum or minimum plasma triglycerides, total cholesterol and LDL ${\cdot}$ VLDL-C response in terms of the proportions of the dietary components. Response surface contours and three dimensional plots were developed for each plasma lipid response. The contours and three dimensional plots were used to help determine those combinations of the dietary fatty acid ratios that would produce the desired minimum or maximum lpid responses. The statistical analyses indicated that the minimized plasma cholesterol response levels could be attained with a diet consisting of 2.26 n-3/n-6 fatty acid and 2.15 P/S ratios.

• Journal of Surface Science and Engineering
• /
• v.27 no.3
• /
• pp.143-148
• /
• 1994

Effects of process variables of HCD ion plating on the film composition of Ti(C, N) were analyzed. The mole ratio of carbon to nitrogen and that of non-metal to titanium in the film primarily depend on the partial pressure ratio of ($C-2H_2$/ $N_2$) and total reactive gas pressure, respectively. The amount of nonmetallic com-ponents increases in nonlinear fashion as the total gas pressure due to the different reactivity of $C-2H_2$ and $N_2$ gases with Ti. The nonmetallic components was saturated dwith nitrogen when the nitrogen gas was more than 60% of total reactive gas. These two process variables could be related systematically using the concept of effective pressure in which the difference of reactivity of each gas was normalized.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.343-346
• /
• 2000

This study was carried out to investigate the effects of influent $NH_4^{\;+}-N$ load, C/N ratio and superficial air velocity on the nitrogen removal efficiencies. Laboratory scale upflow biological aerated filter(BAF) was consisted of an anoxic-aerobic filter packed with porous ceramic media and operated with synthetic wastewater. BAFs requires less energy and space for the system when compared to conventional activated sludge process. The influent C/N ratios were varied from 0 to 1 by adjusting acetate. Various superficial air velocity had been applied to investigate aeration effect on nitrogen removal. The BAF reactor showed more than 90% average $NH_4^{\;+}-N$ removal efficiencies at $NH_4^{\;+}-N$ loading in the range of $0.26{\sim}1.33$ kg $NH_4^{\;+}-N/m^3{\cdot}d$ and 62% average T-N removal efficiencies at the C/N ratio of 1. Moreover, average T-N removal efficiencies increased as the superficial air velocity increased, because of the increase $NH_4^{\;+}-N$ removal efficiencies.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.2
• /
• pp.220-228
• /
• 2007

In this study, effective simultaneous nitrification and denitrification reaction was accomplished in a completely mixed single bioreactor. As the important factors on the reaction, optimal DO concentration and effective range of influent C/N ratio was investigated with the synthetic wastewater. Experimental results show that stable nitrogen removals were accomplished with 0.5 mg/L DO concentration and over 7 C/N ratio. Nitrogen removal efficiency of the real municipal wastewater was low with 0.5 mg/L DO concentration because of its low C/N ratio. The increment of the C/N ratio at the inflow of the municipal wastewater with addition of external carbon source (glucose) over 7(up to 14) shows over 70% nitrogen removal in the single bioreactor.