• 한국의류산업학회지
• /
• 제18권1호
• /
• pp.103-112
• /
• 2016

This research was designed to figure out the perception and attitude of university students toward urban outdoor wear and to provide the guidelines for product quality improvement using Kano model. A total of 270 responses were analyzed by SPSS 20.0 through frequency and factor analysis. Respondents' levels for outdoor activity & outdoor products possession being still low, steady growth in urban outdoor wear market is expected. A total of eight quality factors were identified through factor analysis; suitability, production quality, functionality, ease of care, fabric performance, portability, fashionability, and symbolism. Based on Kano model, quality factors of urban outdoor wear were categorized into three groups: one-dimensional; indifferent; and must-be quality factor. It was found that consumers were satisfied with urban outdoor wear only when it meets the needs for suitability for body types and ease of care, meaning that manufactures should be cautious not to lose these features. Being must-be quality factor, production quality(form stability, quality of subsidiary materials), and fabric performance such as colorfastness should be basically satisfied. The relative importance of each quality feature on satisfaction/dissatisfaction was investigated using CSC(customer satisfaction coefficient). Based on the CSC, every item was classified again. Attractive quality features with large CSC were shown in suitability factor. Must-be quality features with small CSC were mainly shown in functionality and fabric performance factors. These findings imply that manufactures of urban outdoor wear should not only maintain the production quality but also focus on suitability features to differentiate their product with previous products.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.64-70
• /
• 2010

This paper presents how to decide on tuning factor(${\delta}$) and quality factor(Q) values in design of single-tuned passive harmonic filters. Tuning factor(${\delta}$) and quality factor(Q) values have to consider before decision on circuit parameters of passive filters. A Study on these two value has not been scarcely performed and only experienced values has been used in passive harmonic filter design by far. As a experienced value, in cases of 5th and 7th filter, tuning factor(${\delta}$) is about 0.94 and 0.96 respectively and quality factor(Q) is, in all cases of, 50. If Single-tuned passive harmonic filter will be off-tuned, performance of filter will be decreased steeply and occur to parallel resonance between system reactance and filter capacitance. Therefore During the operation, In order not to off-tuning, Filter must be tuned at former order than actual tuning order. This is the same that total impedance of filter must have a reactive impedance. In this paper, Tuning factor(${\delta}$) is decided via example of real system and using the bode-plot and then performance of filters confirmed by filter current absorbtion rate. And Quality factor(Q) decided using the bode plot in example system and then performance of filters confirmed by filter current absorbtion rate also, which makes a calculated filter parameters to satisfy IEEE-519 distortion limits. Finally, Performance of the designed passive harmonic filter using the tuning factor(${\delta}$) and quality factor(Q) values, decided in this paper is verified by experiment and shows that 5th, 7th, 9th, 11th and 13th current harmonic distortions are decreased within IEEE-519 distortion limits, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.148-149
• /
• 2014

In modern society, population overcrowding and concentration of facilities are happened because of the concentration on to city. So this phenomenon demands improvement of material's performance, technical development of structure analysis and design and improvement of constructing ability .High strength concrete has some merits. High strengthening makes the cross section reduced, and that cause decrease of structure weight. And using high durable and superplasticizer promote liquidity, thus high quality concrete can be produced. Because of these advantages, this study is for showing validity of using it by compression/tensile strength experiment. As this experiment's result, when concrete become stronger, interface intensity coefficient between cement and aggregate is different and they don't adhere to each other. So there is brittle failure. Fragility factor also steadily increase with strong concrete, it tells high strength concrete has problem. Therefore the sources used in high strength concrete like cement and aggregate must have great quality. So the source's performance must be supervised well because their quality decides performance criteria.

• 산업융합연구
• /
• 제15권2호
• /
• pp.27-36
• /
• 2017

본 연구에서는 카노 모형과 설문조사를 바탕으로 O2O 배달 앱의 서비스 품질 요인을 분석하고, 서비스 품질을 몇 가지 차원별로 분류하였다. 분석 결과, 일원적 품질요소로는 정확한 정보전달, 다양한 종류의 음식점, 지불방식의 다양성, 메뉴선택의 다양성, 불편사항 해결, 서비스의 친절도, 음식의 맛과 질, 위생과 청결, 간편 결제 시스템 등이었고, 매력적 품질요소로는 최신 정보 업데이트, 신뢰성 있는 이용후기, 다양한 주문방법, 신속한 배달, 브랜드 이미지, 할인 포인트 결제 및 적립 등이었다. 당연적 품질요소는 나오지 않았지만, 불편사항 해결이 당연적 품질요소에 가까운 것으로 나타났다. 무관심 품질요소로는 정보알림 서비스와 이벤트 및 판촉이었다. 본 연구결과는 O2O 배달 앱 서비스 업체들이 어떤 서비스 품질요소에 집중해야 하는지 전략을 수립하는데 많은 도움을 줄 수 있을 것으로 기대한다.

• 수산경영론집
• /
• 제17권1호
• /
• pp.1-17
• /
• 1986

Since the middle of the 70s, the countries with the marine resources declared the exclusive water zone of two hundred miles. As a result, our country lacked many foreign fishing grounds. This awakened our perception of fishing grounds. The fishing ground is an important factor in the economical effectiveness of fisheries. The fishing ground must have the following basic conditions. 1. It must be the place the fishery resources inhabit and wander. 2. Their catching or aquaculturing must be possible by the technical methods. 3. It must have economic worth in the management. The fishing ground that achieves the above basic conditions is affected by the following factors. This is the factor of the fishing ground location. A. Natural factor 1). Suitable climate 2).Abundant resources 3). Good quality of the sea-bottom 4). Not to be pollutted area B, Economic factor 1). Be adjacent to fishing port and fisheries market 2). Good working conditions 3). Be abundant of economical resources C. Social factor 1). Be possible to work legally 2). Be permitted in the political relations 3). Be acquainted with the customs of foreign countries The fishing ground location is mainly affected by the natural factor of the above factors. The abundance of resources depends on the natural resources. The resources in the fishing ground have the cycle of developing period, maturing period, and decaying period according to the fishing efforts. The point that we sustainably yield the maximum of fishery resources is the changing point of maturing period and decaying period. We call this point MSY, so the resources of fishing ground should be managed by the MSY. Therefore, when we select the fishing ground location. We should judge the natural factor, the economic factor and the social factor synthetically according to the situation and environment, so we can achieve the efficient management.

• 품질경영학회지
• /
• 제37권4호
• /
• pp.43-51
• /
• 2009

This study was designed to analyze the relationship of process quality, result quality and management performance in Korean insurance industry. For this study the linkage scheme of service quality concept is used on PZB model and BSC(Balances Score Card) system. In the linkage model, the 5 service qualitry factors used in PZB model are used as the result quality variables, and internal process factor, learning/growth factor in BSC are used the process quality variables affecting the result quality variables. And also customer satisfation factor and financial performance index are used as the management performance variables. In the ivsurance industry, the process quality variables were verified to meaningfully affect the result quality variables, and the result service quality variables were verified to affect the management performance indices. As the result, the process quality and the service quality must be emhanced for the competitiveness of Korean insurance industry.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.57-65
• /
• 2012

The relationship between product quality/function and customer satisfaction has been considered an important point for the new product development. The seminal paper by Kano was the first to thoroughly address the non-linear relationship between product performance/function and customer satisfaction. In the analysis framework of the original Kano model, five factors are assumed, among which indifference factor occupies 40% in the classification scheme. When we analyze survey response using Kano model, many quality attributes can be resulted in indifference factor. This implies that some attributes which are meaningful tend to be classified as indifferent attributes for the customer satisfaction. In order to tackle this problem, a modified Kano model is proposed by reducing the indifference factor. The modified Kano model can be robust for the survey response. A survey is performed for the quality attributes of the smart phone. The response is analyzed and compared based on the original and modified Kano model. The surveyed quality characteristics of the smart phone are performance related attributes, application programs, functional attributes and subjective emotional quality attributes. Many quality attributes classified as indifference factor in the original model are classified as attractive, must-be, and expected factors, respectively.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 추계학술대회
• /
• pp.475-488
• /
• 2005

This paper aimed to exam core factors of the service quality and analyze their effects on trust, satisfaction. And this paper analysis trust and satisfaction effects on revisti intention. To accomplish this purpose, this study examined previous studies and summarized core factors of service quality. Form previous studies, we drawed core factor. Core factor is convenience, technologies, valuable of contents, service. These core factors will affect on customer trust, customer satisfaction and trust, satisfaction will affect on revisit intention. To be winner, companies must be consider these key factor(convenience, technologies, valuable of contents, service).

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.291-301
• /
• 2012

Quality management activities are an important factor that they could be regarded as a most significant drive to prompt growth of a corporation. From this research as core strategy of the enterprise single ppm wants to emphasize the importance of the quality management activity. The Empirical results are summarized as follows, for successful Single PPM, leadership and corporate culture should be based on. As Single PPM activities factor, Customer Management significantly affects Single PPM Performance. Therefore, to the success of quality management activities, internal corporate leadership and corporate culture must be formed. And for customer management, should take advantage of a variety of the company's internal and external information strategically.

• International Journal of Quality Innovation
• /
• 제2권2호
• /
• pp.24-33
• /
• 2001

As we know, the quality of processes is technically depicted by variation, a product or process with the best quality must naturally require the variation as less as possible. The variation is usually reduced with many ways, say, by adjusting parameters settings under robust design with many turns expensive experiments. So ones are trying to reach the robustness by detecting cheap and simple methods. In this paper, a both practical and simple technique for quality improvement, namely reducing the variation, by data classification is studied. First, all possible system factors are included, which may dominate the variation law. And then we make use of the past observations and their classification as well as boxplot charts to find out the internal rule between the variation and the system factor. Next, adjust the location of the system factor according to the rule so that the variation could, to some extent, be lessened. Finally, two typical quality improvement cases based on data classification are presented.