• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2003

In this study, TOPMODEL(TOPography based hydrologic MODEL) was tested linked with Muskingum river routing technique for $581.7km^2$ Anseong-cheon watershed. Linear trend surface interpolation was used to give flow direction for flat areas located in downstream watershed. MDF (multiple flow direction) algorithm was adopted to derive the distribution of ln(a/$tan{\beta}$) values of the model. Because the coarser DEM resolution, the greater information loss, the watershed was divided into subwaterhseds to keep DEM resolution, and the simulation result of the upstream watershed was transferred to downstream watershed by Muskingum techniques. Relative error of the simulated result by 500 m DEM resolution showed 27.2 %. On the other hand, the relative error of the simulated result of 300 m DEM resolution by linked 2 subwatersheds with Muskingum method showed 15.8 %.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.407-407
• /
• 2017

홍수 예측을 위한 분포형 수문모형의 유출해석에서 하도추적은 수리학적 하도 추적과 수문학적 하도 추적 방법이 있다. 수리학적 하도 추적은 운동파 방정식, 확산파 방정식 등을 이용하여 수리현상을 시간과 공간으로 편미분하여 홍수량 예측을 한다. 수리적 하도 추적은 시간적, 공간적 안정조건(stability condition)을 만족해야된다. 면적이 큰 유역에서 적용할 때에는 계산에 소요되는 시간이 크다. 그러므로 국지호우로 인한 돌방홍수 예 경보를 위해서는 준실시간 또는 실시간 홍수 감시 및 예측이 필요하므로 계산에 소요되는 시간이 큰 수리학적 하도추적을 이용한 홍수 예측은 한계를 가진다. 본 연구에서는 유역면적이 큰 유역의 준실시간 홍수 감시 및 예측을 위하여 수문학적 하도추적 기법은 하천차수별 저류상수를 적용한 multi-Muskingum방법을 개발하여 모의하였다. multi-Muskingum 적용한 결과 모의시간이 상당히 단축되었으며 자료동화 기법을 통하여 모형의 정확도를 개선하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2270-2275
• /
• 2008

수문학적 하도추적법의 하나인 Muskingum 모형은 미 육군공병단(U.S. Army Corps of Engineers)에 의해서 미국 Ohio 주의 Muskingum 유역에 홍수조절계획으로 처음 사용되었으며 모형의 구조 및 입력자료의 단순성에 비하여 비교적 우수한 결과를 모의할 수 있는 것으로 알려져 있다. 1938년 McCarthy에 의해서 개발되었고 구간내 총저류량은 prism 저류와 wedge 저류로 구분하여 prism 저류는 유출량에 wedge 저류는 유입량과 유출량의 차에 직접 비례한다는 가정하에 추적식을 개발하였다. 이후 지속적인 연구가 이뤄져 1985년 O'Donnel은 측방유입량(lateral inflow)을 상류단의 유입량에 비례하는 형태로 3-매개변수 muskingum 모형을 제안하여 추적계수의 결정을 선형대수(linear algebra)에서 동차(homogeneous)연립방정식 해를 구하는 Cramer 법칙인 matrix 기법을 적용하였다. 본 연구에서는 홍수사상으로부터 측방유입량이 고려되고 추적계수 결정에 있어서 직접 계산이 가능한 O'Donnel(1985)이 제안한 3-매개변수 muskingum 모형을 적용하였다. 추적계수들의 결정은 직접 matrix 기법을 적용하였고 적용대상은 낙동강 유역의 낙동 지점을 상류단으로 구미 지점을 하류단으로 선정하였다. 홍수사상은 낙동강 유량측정 조사사업 2005년${\sim}$2007년 보고서에 수록된 수문자료를 선정하여 관측치와 계산치를 비교하였고 홍수사상에 적용하여 수문곡선을 추정하였으며, 각각의 매개변수가 추적구간에 어떠한 영향을 미치는지 변수간의 관계를 분석하였다. 또한, 관측치와 계산치의 적합도 검증은 평균제곱근오차(root mean squar error; RMSE)와 모형 효율성 계수(model efficiency; ME)를 산정하여 분석하였으며, 하도 구간내 저류량은 대상구간에 대한 유입량과 유출량의 가중합에 비례한다는 선형모형을 적용하였다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.289-292
• /
• 2002

In this study, a topography based hydrologic model (TOPMODEL) was tested on the Anseong-cheon watershed. Pit in watershed was removed by liner trend surface interpolator. The DTM Analysis program is used to derived a distribution of ln($a/tan{\beta}$) values from DEM (Digital Elevation Model) using the MDF (Multiple Direction Flow) algorithm of Quinn et al (1995). Current TOPMODEL program limits are number of time step, ln($a/tan{\beta}$) increment, delay histogram ordinate and size of subcatchment pixel maps. Therefore, TOPMODEL is not suitable for application of large watershed. Muskingum method and watershed division enhance grid pixel resolution for rainfall-runoff simulation accuracy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1993.07a
• /
• pp.425-432
• /
• 1993

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.404-411
• /
• 2019

In this study, the HEC-HMS was applied to determine rainfall-runoff processes for the Gokgyuchun basin. Several sub-basins have large-scale reservoirs for agricultural needs and they store large amounts of initial runoff. Three infiltration methods were implemented to reflect the effect of initial loss by reservoirs: 'SCS-CN'(Scheme I), 'SCS-CN' with simple surface method(Scheme II), and 'Initial and Constant rate'(Scheme III). Modeling processes include incorporating three different methods for loss due to infiltration, Clark's UH model for transformation, exponential recession model for baseflow, and Muskingum model for channel routing. The parameters were calibrated using an optimization technique with trial and error method. Performance measures, such as NSE, RAR, and PBIAS, were adopted to aid in the calibration processes. The model performance for those methods was evaluated at Gangcheong station, which is the outlet of study site. Good accuracy in predicting runoff volume and peak flow, and peak time was obtained using the Scheme II and III, considering the initial loss, whereas Scheme I showed low reliability for storms. Scheme III did not show good matches between observed and simulated values for storms with multi peaks. Conclusively, Scheme II provided better results for both single and multi-peak storms. The results of this study can provide a useful tool for decision makers to determine master plans for regional flood control management.

• Spatial Information Research
• /
• v.8 no.2
• /
• pp.257-274
• /
• 2000

Recently, natural environment is being forced by the quick increasing of population and industrialization, and especially, capacity and pollution of water resource is being come to the front. It needs to extract the accurate topological and hydrological parameters of watershed in order to manage water resource efficiently. But, these data are processed yet by manual work and simple operation in hydrological fields. In this paper, we presented algorithm that could extract topological any hydrological parameters over Sumjin watershed using GIS and RS and it gives the saving of data processing time and the confidency of data. The extraction procedure of topological characteristics and hydrological parameters is as below. First, watershed and stream are extracted by DEM and curve number is extracted throughout the overlay of landcov map and soil map. Also, we extracted surface parameters like watershed length and the slope of watershed length by Grid computation into watershed and stream. And we gave the method that could extract hydrologic parameters like Muskingum K and sub-basin lag time by executing computation into surface parameters and average SCS curve number being extracted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.17-24
• /
• 2018

The HEC-HMS model was applied to identify the rainfall-runoff processes for the Anseongchun basin, where the lower part of the stream has been damaged severely by tropical storms in the past. Modeling processes include incorporating with the SCS-CN model for loss, Clark's UH model for transformation, exponential recession model for baseflow, and Muskingum model for channel routing. The parameters were calibrated through an optimization technique using a trial and error method. Sensitivity analysis after calibration was performed to understand the effects of parameters, such as the time of concentration, storage coefficient, and base flow related constants. Two storm water events were simulated by the model and compared with the corresponding observations. Good accuracy in predicting the runoff volume, peak flow, and the time to peak flow was achieved using the selected methods. The results of this study can be used as a useful tool for decision makers to determine a master plan for regional flood control management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.11-22
• /
• 2000

It needs to extract the accurate topological characteristics and hydrological parameters of watershed in order to manage water resource efficiently. But, these data are processed yet by manual wok and simple operation in hydrologic fields. In this paper, we presented algorithm that could extract topological characteristics and hydrological parameters over watershed using GSIS and it gives the saving of data processing tin and the confidency of data. We presented coupling method between GSIS and hydrologic model by using extracted parameters into the input parameter of HEC-HMS hydrologic model. The extraction procedure of topological characteristics and hydrological parameters is as below. First, watershed and stream are extracted by DEM and curve unmber is extracted throughout the overlay of landuse map and soil map. Also, we extracted surface parameters like the length of the longest flow path and the slope of the longest flow path by Grid computation into watershed and stream. And we gave the method that could extract hydrologic parameters like Muskingum K and sub-basin lag tin by executing computation into surface parameters and average Sn curve number being extracted.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.272-276
• /
• 2011

현재 우리나라에서 사용되고 있는 강우-유출모형은 하도추적 방식을 모형 내에 내장되어 있는 해석절차나 유역내 모든 관거 및 하도에 일괄하여 적용하는 방식으로 되어있어 도시유역과 같이 관거와 하도가 복합적으로 구성되어 있는 경우 적절한 해석방식의 채택이 힘든 실정이다. 따라서 본 연구에서는 관거 및 하도의 개별적인 해석이 가능한 2009년 하천설계기준의 도시유역 유출해석 모형으로 포함된 FFC2Q모형을 이용하여 관거와 하도가 복합적으로 구성되어 있는 홍제천 유역을 선정하여 흐름이송 해석방법을 다양하게 설정하여 강우-유출 특성을 분석하고 실측자료에 대한 모의 방식별 분석결과에 대한 적합도를 분석하였다. 적합도 분석결과 하도에 Muskingum-Cunge법, 관거에 Kinematic-Wave법을 적용하여 흐름이송해석을 하는 경우가 가장 적합한 것으로 나타났다.