• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.673-681
• /
• 2016

The adequacy of urban air quality monitoring networks in the largest metropolitan city, Seoul was evaluated using multivariate analysis for $SO_2$, $NO_2$, CO, PM10, and $O_3$. Through cluster analysis for 5 air pollutants concentrations, existing monitoring stations are seen to be clustered mostly by geographical locations of the eight zones in Seoul. And the stations included in the same cluster are redundantly monitoring air pollutants exhibiting similar atmospheric behavior, thus it can be seen that they are being operated inefficiently. Because monitoring stations groups representing redudancy were different depending on measurement items and several pollutants are being measured at the same time in each air monitoring station, it is seemed to be not easy to integrate or transmigrate stations. But it may be proposed as follows : the redundant stations can be integrated or transmigrated based on ozone of which measures are increasing in recent years and alternatively the remaining pollutants other than the pollutant exhibiting similar atmospheric behavior with nearby station's can be measured. So it is considered to be able to operate air quality monitoring networks effectively and economically in order to improve air quality.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1108-1113
• /
• 2000

A condition monitoring methodology for rotating machinery is proposed based on multivariate statistical analysis. The CMS usually are using the vibration signal amplitude such as acceleration RMS, peak and velocity RMS to detect machine faults but the information is not so enough that CMS cannot perform reliable monitoring. So new parameters are added such as shape factor, crest factor, kurtosis and skewness as time domain parameters and spectrum amplitude of rotating frequency, $2^{nd}$ harmonics and gear mesh frequency etc. as frequency domain parameters. Many parameters are combined to represent the machine state using the Hotelling's $T^2$ statistics. The proposed methodology is tested in laboratory and the on-line experiment has shown that the proposed methodology offers a reliable monitoring for rotating machinery.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.2
• /
• pp.525-533
• /
• 2015

Modern production process is a very complex structure combined observations which are correlated with several factors. When the error signal occurs in the process, it is very difficult to know the root causes of an out-of-control signal because of insufficient information. However, if we know the time of the change, the system can be controlled more easily. To know it, we derive a maximum likelihood estimator (MLE) of the change point in a process when observations are from a multivariate IMA(1,1) process by monitoring residual vectors of the model. In this paper, numerical results show that the MLE of change point is effective in detecting changes in a process.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.4
• /
• pp.937-945
• /
• 2017

The purpose of using a control chart is to detect any change that occurs in the process. When control charts are used to monitor processes, we want to identify this changes as quickly as possible. Many problems in quality control involve a vector of observations of several characteristics rather than a single characteristic. Multivariate CUSUM or EWMA charts have been developed to address the problem of monitoring covariance matrix or the joint monitoring of mean vector and covariance matrix. However, control charts tend to work poorly when we use the highly correlatted variables. In order to overcome it, Hawkins (1991) proposed the use of regression adjustment variables. In this paper, to monitor covariance matrix, we investigate the performance of MEWMA-type control charts with and without the use of regression adjusted variables.

• Journal of Integrative Natural Science
• /
• v.14 no.3
• /
• pp.116-122
• /
• 2021

Properties and comparison of multivariate CUSUM and EWMA charts for monitoring Σ of multivariate normal N(${\underline{\mu}}$, Σ) process has considered. Comparison of the performances of the considered charts, the numerical values are obtained by simulation with 10,000 iteration in terms of ATS, ANSS and ANSW. We found that EWMA chart with small values of smoothing constant more effectively detects the process changes than with large smoothing constant. And we also found that CUSUM chart with small value of reference value is more effectively detecting the process change than with large reference value. If a process engineer has interest in detecting small amount of shift rather than large shift, he/she can be recommended to use small smoothing constant in EWMA chart and small reference value in CUSUM chart.

• Smart Structures and Systems
• /
• v.14 no.3
• /
• pp.377-395
• /
• 2014

Vibration-based fault detection and condition monitoring of rotating machinery, using statistical process control (SPC) combined with statistical pattern recognition methodology, has been widely investigated by many researchers. In particular, the discrete wavelet transform (DWT) is considered as a powerful tool for feature extraction in detecting fault on rotating machinery. Although DWT significantly reduces the dimensionality of the data, the number of retained wavelet features can still be significantly large. Then, the use of standard multivariate SPC techniques is not advised, because the sample covariance matrix is likely to be singular, so that the common multivariate statistics cannot be calculated. Even though many feature-based SPC methods have been introduced to tackle this deficiency, most methods require a parametric distributional assumption that restricts their feasibility to specific problems of process control, and thus limit their application. This study proposes a nonparametric multivariate control chart method, based on multiscale wavelet scalogram (MWS) features, that overcomes the limitation posed by the parametric assumption in existing SPC methods. The presented approach takes advantage of multi-resolution analysis using DWT, and obtains MWS features with significantly low dimensionality. We calculate Hotelling's $T^2$-type monitoring statistic using MWS, which has enough damage-discrimination ability. A bootstrap approach is used to determine the upper control limit of the monitoring statistic, without any distributional assumption. Numerical simulations demonstrate the performance of the proposed control charting method, under various damage-level scenarios for a bearing system.

• Communications for Statistical Applications and Methods
• /
• v.12 no.2
• /
• pp.265-273
• /
• 2005

In this paper, we proposed multivariate EWMA control charts for both combine-accumulate and accumulate-combine approaches to monitor dispersion matrix of multiple quality variables. Numerical performance of the proposed charts are evaluated in terms of average run length(ARL). The performances show that small smoothing constants with accumulate-combine approach is preferred for detecting small shifts of the production process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.86-109
• /
• 2019

Cloud computing systems' performance is still a central focus of research for determining optimal resource utilization. Running several existing benchmarks simultaneously serves to acquire performance information from specific cloud system resources. However, the complexity of monitoring the existing performance of computing systems is a challenge requiring an efficient and interactive user directing performance-monitoring system. In this paper, we propose an effective multivariate control framework for monitoring cloud systems performance. The proposed framework utilizes the hardware cloud systems performance metrics, collects and displays the performance measurements in terms of meaningful graphics, stores the graphical information in a database, and provides the data on-demand without requiring a third party software. We present performance metrics in terms of CPU usage, RAM availability, number of cloud active machines, and number of running processes on the selected machines that can be monitored at a high control level by either using a cloud service customer or a cloud service provider. The experimental results show that the proposed framework is reliable, scalable, precise, and thus outperforming its counterparts in the field of monitoring cloud performance.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.201-207
• /
• 2007

In some manufacturing industries, there are many situation in which the simultaneous monitoring or control of two or more related quality characteristics is necessary. However, monitoring these two or more related quality characteristics independently can be very misleading. When several characteristics of manufactured component are to be monitored simultaneously, multivariate $x^2$ or $T^2$ control chart can be used. In this paper, establishing a early warning system(EWS) using multivariate control charts to analyze early out-of-control signals in melting process with many quality characteristics was presented. This module which we developed to control several characteristics improved efficiency and effectiveness of process control in the melting process.

• Structural Engineering and Mechanics
• /
• v.88 no.6
• /
• pp.569-581
• /
• 2023

This paper introduces a system to detect and diagnose anomalies in pumped storage hydropower plants. We collect data from various types of sensors, including those monitoring temperature, vibration, and power. The data are classified according to the operation modes (pump and turbine operation modes) and normalized to remove the influence of the external environment. To detect anomalies and diagnose their types, we adopt a multivariate normal distribution analysis by learning the distribution of the normal data. The feasibility of the proposed system is evaluated using actual monitoring data of a pumped storage hydropower plant. The proposed system can be used to implement condition monitoring systems for other plants through modifications.