• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2339-2345
• /
• 2020

Radiation imaging systems consisting of a large number of channels greatly benefit from multiplexing methods to reduce the number of channels with minimizing the system complexity and development cost. In conventional pixelated radiation detector modules, such as anger logic, is used to reduce a large number of channels that transmit signals to a data acquisition system. However, these methods have limitations of electrical noise and distortion at the detector edge. To solve these problems, a multiplexing concept using a digital signal encoding technique based on a time delay method for signals from detectors was developed in this study. The digital encoding multiplexing (DEM) method was developed based on the time-over-threshold (ToT) method to provide more information including the activation time, position, and energy in one-bit line. This is the major advantage of the DEM method as compared with the traditional ToT method providing only energy information. The energy was measured and calibrated by the ToT method. The energy resolution and coincidence time resolution were observed as 16% and 2.4 ns, respectively, with DEM. The position was successfully distributed on each channel. This study demonstrated the feasibility that DEM was useful to reduce the number of detector channels.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.2
• /
• pp.52-56
• /
• 2010

In this paper, we investigate the polarization multiplexing for micro holographic storage. The proposed multiplexing method is performed by using crystal media that use photorefractive materials such as Fe-doped $LiNbO_3$. We discuss the feasibility of fast recording, high capacity and transfer rate for polarization multiplexing method. Finally, we experimentally verify the proposed method using polarization selectivity.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3790-3797
• /
• 2021

Although the individual channel readout method can improve the performance of PET detectors with pixelated photo-sensors, such as silicon photomultiplier (SiPM), this method leads to a significant increase in the number of readout channels. In this study, we proposed a novel multiplexing method that could effectively reduce the number of readout channels to reduce system complexity and development cost. The proposed multiplexing circuit was designed to generate bipolar pulses with different zero-crossing points by adjusting the time constant of the high-pass filter connected to each channel of a pixelated photo-sensor. The channel position of the detected gamma-ray was identified by estimating the width between the rising edge and the zero-crossing point of the bipolar pulse. In order to evaluate the performance of the proposed multiplexing circuit, four detector blocks, each consisting of a 4 × 4 array of 3 mm × 3 mm × 20 mm LYSO and a 4 × 4 SiPM array, were constructed. The average energy resolution was 13.2 ± 1.1% for all 64 crystal pixels and each pixel position was accurately identified. A coincidence timing resolution was 580 ± 12 ps. The experimental results indicated that the novel multiplexing method proposed in this study is able to effectively reduce the number of readout channels while maintaining accurate position identification with good energy and timing performance. In addition, it could be useful for the development of PET systems consisting of a large number of pixelated detectors.

• Journal of the Optical Society of Korea
• /
• v.2 no.1
• /
• pp.38-41
• /
• 1998

The method of using fiber speckle patterns can be applied to the multiplexing of volume holograms. Fiber speckle patterns enable various multiplexing techniques such as shift, angular, and mode-scrambling methods Hybrid methods involving more than one multiplexing technique are also possible. Some images are stored and retrieved with one or two of multiplexing methods, and the experimental results are discussed.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.859-861
• /
• 2008

This letter proposes a conditional access system (CAS) suitable for use in terrestrial digital multimedia broadcasting (T-DMB), based on an effective multiplexing method to provide encrypted T-DMB services. Specifically, the proposed multiplexing method for a CAS is designed to reduce the additional bit rate while assuring easy access to the designated encrypted services. Finally, the performance of the implemented CAS is confirmed through implementation and a broadcasting experiment under various service environments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.42-48
• /
• 2008

In this paper, we have introduced a Code Division Multiplexing transmission method which is similar to OFDM and analyze ECCM performances. We have verified CDM transmission method has a good LPI performance and a feasible ECCM performance. This capability could be useful for reduction of RF interference which occurs when many equipments operate densely in small area. The equipment that uses CDM transmission method supports variable transmission rate and order-wire effectively and conveniently to user. This CDM method has similar ECCM performance comparing to serial DS method. CDM method has good multi-path signal processing capability and could be useful for mobile communication environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1419-1424
• /
• 2013

Passive optical networks (PONs) are the emerging solution for access networks since PONs provide high bandwidth and the low operation cost. In recent, the new solution in access networks is TWDM PON which is a mixture of WDM (wavelength-division multiplexing) and TDM (time-division multiplexing). This paper proposes a new MAC (media access control) protocol for TWDM PON. In addition, this paper proposes and evaluates a new dynamic bandwidth allocation method for TWDM PON.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.436-442
• /
• 2018

In a spatially interlaced stereoscopic (SIS) three-dimensional (3D) display to be realized by providing the observer a part of left-eye/right-eye images, a loss of information can be perceived due to the un-shown part of each image. In order to resolve that problem, an improved SIS 3D display is proposed to deliver the images without loss of information to the observer using a time-multiplexing scheme. However, that time-multiplexing SIS also has a problem of luminance distortion when the desired luminance is not shown due to an insufficient response of the liquid crystal cell. In this paper, we propose a new method by optimizing the image data to show correct luminance with minimum distortion.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.3
• /
• pp.63-69
• /
• 2001

Smartcard is highlighted as infrastructure that has an excellent security for executing functions such as user authentication, access control, information storage and control, and its market is expanding rapidly. But possibilities of forgery and alteration by hacking are increasing as well. This paper proposes a method to prevent card forgery and alteration using angular multiplexing and private key multiplexing method on optical encryption, and proposed a Public Key Infrastructure(PKI)-based authentication system combined with One-Time Password (OTP) for verification of forgery and alteration .

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3728-3752
• /
• 2016

Wireless mesh networks (WMNs) have been increasingly applied in private and public networks during the last decade. In a different context, voice over IP (VoIP) has emerged as a new technology for making voice calls around the world over IP networks and is replacing traditional telecommunication systems. The popularity of the two technologies motivated the deployment of VoIP over WMNs. However, VoIP over WMNs suffers from inefficient bandwidth utilization because of two reasons: i) attaching 40-byte RTP/UDP/IP header to a small VoIP payload (e.g., 10 bytes) and ii) 841 μs delay overhead of each packet in WMNs. Among several solutions, VoIP packet multiplexing is the most prominent one. This technique combines several VoIP packets in one header. In this study, we will survey all the VoIP multiplexing methods over WMNs. This study provides a clear understanding of the VoIP bandwidth utilization problem over WMNs, discusses the general approaches in which packet multiplexing methods could be performed, provides a detailed study of present multiplexing techniques, shows the aspects that hinder the VoIP multiplexing methods, discusses the factors affected by VoIP multiplexing schemes, shows the merits and demerits of different multiplexing approaches, provides guidelines for designing a new improved multiplexing technique, and provides directions for future research. This study contributes by providing guidance for designing a suitable and robust method to multiplex VoIP packets over WMNs.