• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.1-8
• /
• 1999

We analyze the transmission performance of WDM system based on cascaded optical add/drop multiplexers. The considered factors degrading the performance in this paper include the intra-channel corosstalk caused from space switches and demultiplexers/multiplexers, the amplified spontaneous emission noise, and the extinction ratio. To ensure the power penalty within 1dB, the extinction ration more than 13dB, the switch corosstalk less than 39dB, and the demultiplexer/multiplexer crosstalk less than 20dB are required. Under the assumption of switch corosstalk less than 30dB, performance degradation due to the ASE noise is dominant compared to the crosstalk. With the fixed decision threshold in an optical receiver, the maximum number of cascaded nodes reduces to a half compared to the case of the optimum decision threshold.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.471-482
• /
• 2011

This paper introduces an development of high-definition(HD) 3DTV experimental broadcasting system and its experimental service that has been launched via three broadcasting network including terrestrial, cable and satellite in the late of 2010. This 3DTV experimental broadcasting service employs an innovative 3DTV broadcasting mechanism, called as dual stream method in which left and right images are encoded by using each video encoder and multiplexed using MPEG-2 system technology for guaranteeing backward-compatibility with legacy DTV. This paper specifically describes the developed experimental broadcasting system, concentrating on 3DTV re-multiplexer and 3DTV receiver. Finally, implementation and terrestrial 3DTV experimental broadcasting service results will be introduced from the point of objective and subjective evaluation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.259-262
• /
• 2012

This paper describes a delay-locked loop (DLL) that generates a 64-phase clock with the operating frequency of 125MHz. The proposed DLL use a $4{\times}8$ matrix-based delay line to improve the linearity of a delay line. The output clock with 64-phase is generated by using a CMOS multiplex and a inverted-based interpolator from 32-phase clock which is the output clock of the $4{\times}8$ matrix-based delay line. The circuit for an initial phase lock, which is independent on the duty cycle ratio of the input clock, is used to prevent from the harmonic lock of a DLL. The proposed DLL is designed using a $0.18-{\mu}m$ CMOS process with a 1.8 V supply. The simulated operating frequency range is 40 MHz to 200 MHz. At the operating frequency of a 125 MHz, the worst phase error and jitter of a 64-phase clock are +11/-12 ps and 6.58 ps, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1910-1916
• /
• 1999

This paper suggested to solve ATM switch performance and service rate which was input buffer managed scheme in ATM network with burst traffic characteristics, For this purpose, ATM multiplexer is prepared before sending for handling burst random input traffic to multiplex and then sort based on cell inter-arrival time and cell processing due time which had been marked after that. The server looks for cell header with the most shortest due time and sends it, thus it is satisfied that real time traffic for instance CBR and rt-VBR was guaranteed cell processing time to send fast than non real time traffic. For analysis of ATM switch performance with cell processing due time and priority, each output port has divided into four different virtual buffer and each buffer has assigned different cell inter-arrival time and processing due time according to ATM Forum for example CBT/rt-VBR, nrt-VBR, ABR and UBR and showed it’s optimal service parameters then analyzed service rate behaviors according to each traffic characteristics.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.21-28
• /
• 2017

Eddy current array (ECA) technology provides the ability to electronically scan without mechanical scanning for a footprint of probe that consists of several eddy current coils arranged side-by-side and two dimensionally. Compared to single-coil eddy current technology, the ECA technology has a higher inspection speed and reliability because a large area can be covered in a single-probe pass and the obtained images can facilitate data interpretation. In this study, we developed an eddy current array probe with $2{\times}16$ coil arrays and a multiplexer that can select transmit-receive coils sequentially and operate in transmit-receive mode. Surface inspection was performed using this probe for specimens that had various flaws and the characteristics of transmit-receive mode ECA technology was studied through an analysis of the obtained eddy current signals and C-scan images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.46-51
• /
• 2002

A new interleaved synchronous mirror delay(SMD) is proposed in order to reduce the circuit size and the power. The conventional interleaved SMD has multiple pairs of forward delay array(FDA) and backward delay away(BDA) in order to reduce the jitter. The proposed interleaved SMD. requires one FDA and one BDA by changing the position of multiplexer. Moreover, the proposed interleaved SMD solves the polarity problem with just one extra inverter. Simulation results show that about 30% power reduction and 40% area reduction are achieved in the proposed interleaved SMD. All circuit simulations and implementations are based on a 0.25um two-metal CMOS technology.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.135-141
• /
• 2003

In arrayed waveguide grating (AWG) devices whose waveguides were composed of polymer with negative thermo-optic coefficient as overcladding, and silica with positive thermo-optic coefficient as both core and undercladding, we investigated the temperature dependence of the central wavelength using two-dimensional SFDM. From these results, it was confirmed that the temperature dependence can be nearly eliminated by adjusting the refractive index of the cladding and the thickness of the silica thin film upper-loaded on the core. Based on the numerical calculations, the AWG device with polymer overcladding was fabricated. and its optical characteristics were compared with those of the orginal silica AWG device. The introduction of polymer overcladding decreased the temperature dependence of the central wavelength from 0.0130 nm/$^{\circ}C$ to 0.0028 nm/$^{\circ}C$ without deteriorating the insertion loss and crosstalk characteristics.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.531-538
• /
• 1998

This paper represents the design of 3D endoscopic image processing system in order to Improve visualization and enhance the ability of the surgeon to perform delicate endoscopic surgery. The proposed 3D systems have four features of stereo endoscopic image processing The multiplexer give field seauential stereo for recording and for aligning cameras and viewing stereo with 3D monitor. Demultiplexing of the field sequential image which separates out the R and L images for dual TFT-LCD 3D monitor viewed with passive polarized glasses. separable processing of the left and right eye images, and design of TFT-LCD 3D monitor. The viewing angle, zone, and image quality of the Polarization-type Stereoscopic Display (SM500TFT-3D) system which we have developed using 15 Samsung TFT-1.CD with a screen resolution of 1024×768 pixels were measured and compared with those of Electric Shutter-type Stereoscopic Display system. The result of experiments shows that the Polarization-type Stereoscopic Display System using TFT-LCD has a wade viewing angle and zone which Is necessary fort multi-view and it has better image quality and stability of the optical performances than the Electric Shutter-type does.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1668-1675
• /
• 1999

In this thesis, a narrowband bandpass filter using HTS is proposed for the multiplexer of the satellite communication subsystems. The proposed structure using HTS provides the narrower band and the lower insertion loss characteristics than the conventional parallel-coupled-line bandpass filter. The filter structure using hairpin-line only cause the spurious modes due to the surface waves. But these modes can be lessened by using the hybrid hairpin-line/parallel-coupled-line proposed in this thesis. The narrowband bandpass filters using HTS at the operation frequency of 14.25 GHz are fabricated to have the narrow bandwidth less 1% and the insertion loss less 3dB in comparison with the normal metal microstrip filter with the same three poles. The experimental results show that the filter using HTS has the characteristics of the narrower bandwidth and less insertion loss and can be fabricated with more compact size in comparison with the bandpass filter using normal metal.