• 대한방사선기술학회지:방사선기술과학
• /
• 제5권1호
• /
• pp.15-19
• /
• 1982

Authors made an experiment to know the relation of surface doses and multiple factors of exposure by using grids, fields, tube voltages objects and distances and obtained the results as follows: 1. Surface doses were increased in proportion to the thickness of objects. 2. Surface doses were more influenced when irradiated fields were small and tube voltages were low. 3. Surface doses were a logarthmic proportion to the focus-object distance. 4. Multiple factors of exposure by using grid were under the control of the thickness of objects, irradiated fields and tube voltages but the relation of them were not fixed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.45.4-45
• /
• 2002

In EIT, an array of disjoint electrodes is attached on the boundary of the object and a set of small alternating electrical currents is injected into the object through these electrodes, and then the corresponding set of voltages is measured on the same array of the electrodes. The objective in EIT is to estimate the resistivity distribution inside the object based on the set of measured voltages and injected currents. In this paper, we proposed a new dynamic EIT reconstruction scheme based on the interacting multiple model (IMM) algorithm. The main contribution of the proposed scheme is that multiple models are employed for the state evolution to get around the modeling uncertainty. Extensi...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1866-1868
• /
• 2004

This paper deals with the device for measuring the time-varying magnetic fields and induced voltages caused by lightning discharges. The system consists of two loop antennas for the measuring the magnetic flux density and induced voltages caused by the lightning current, an integrator a data acquisition and a personal computer with a software package that was developed for the analysis of the measurements.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.32-39
• /
• 2008

Tunnel oxide of non-volatile memory (NVM) devices would be very difficult to downscale if ten-year data retention were still needed. This requirement limits further improvement of device performance in terms of programming speed and operating voltages. Consequently, for low-power applications with Fowler-Nordheim programming such as NAND, program and erase voltages are essentially sustained at unacceptably high levels. A promising solution for tunnel oxide scaling is tunnel barrier engineering (TBE), which uses multiple dielectric stacks to enhance field-sensitivity. This allows for shorter writing/erasing times and/or lower operating voltages than single $SiO_2$ tunnel oxide without altering the ten-year data retention constraint. In this paper, two approaches for tunnel barrier engineering are compared: the crested barrier and variable oxide thickness. Key results of TBE and its applications for NVM are also addressed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1112-1115
• /
• 1990

Described is a new control signal transmission system which utilizes an optical fiber to transmit 2-bit control signals from the transmitter to receiver. In the transmitter the DC series control voltages are converted into the multiple frequency signals by voltage controlled oscillator (VCO). The multiple frequency signals can easily be transmitted by optical fiber. In the receiver the multiple frequency signals can be detected by analog or digital circuits and then be converted into 2-state control signals which can be used for a variety of applications.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.384-392
• /
• 2018

다중출력 LDO 레귤레이터는 다양한 공급 전압이 필요한 임베디드 시스템에서 변환 효율을 개선할 수 있는 방안이 된다. 다중 출력을 위한 시분할 구조에서 LDO의 피드백 인자가 작아지면 정착시간이 길어져서 리플 전압이 커진다. 제안하는 토폴로지에서는 기준 전압을 가변하여 일정한 피드백 인자를 구현함으로써 정착시간과 리플 특성을 개선한다. $0.35{\mu}m$ 표준 CMOS 공정으로 설계한 4 채널 프로토타입의 시뮬레이션 결과 제안하는 구조는 피드백 인자가 0.4 이하인 기존 회로보다 정착시간과 리플 특성이 2배 이상 개선되는 것을 입증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.184-191
• /
• 2016

In recent years, there are a number of studies that have been carried out to explore the alternative for Mineral Oil (MO) as dielectric insulating fluid in transformers due to the increasing tight regulation on safety and environment. Vegetable oils have been identified as suitable candidate since it is biodegradable, non-toxic and high flash/fire points which ensure more in-service safety. Among the types of vegetable oils considered for transformers application are Palm Oil (PO) and Coconut Oil (CO). This paper presents an experimental study on the lightning breakdown voltages of PO and CO under non-uniform electric field based on needle-sphere electrodes configuration at 3 small gap distances. The type of PO used in this study is Refined Bleached and Deodorized Palm Oil (RBDPO) Olein. The main focus of this study is to examine the lightning breakdown performance of RBDPO and CO under different test conditions and assess its suitability as dielectric insulating fluid in transformers. The effect of voltage polarities (positive and negative) and testing methods (rising-voltage, up-and-down and multiple-voltage) were investigated. The data obtained from all tests were analysed by Weibull distribution in order to determine the withstand voltages for each type of oils. It was found that the breakdown voltages of RBDPO and CO are comparable with MO under positive lightning impulse. Under negative lightning impulse, the breakdown voltage of MO is slightly higher than RBDPO and CO. There is no significant effect of testing methods and voltage polarities on lightning breakdown voltages of RBDPO and CO. Based on the statistical analysis, it is found that the breakdown voltages of RBDPO and CO at 1% probability are slightly lower than MO.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.13-14
• /
• 2013

Multiple output converters (MOCs) are widely used for applications which require various kinds of the output voltages due to its advantages in cost, volume, and efficiency. However, most of the MOCs developed so far can regulate only one output tightly and require as many secondary windings in the transformer as the number of the outputs. In this paper, a novel Time Division Multiple Control (TDMC) method to regulate all the outputs in high precision is proposed and applied to the double ended forward converter for the multiple battery charger. Additional benefit of the proposed topology is to require only one secondary winding in the transformer for all the outputs. The proposed converter can charge two different kinds of batteries or same kind of batteries in different state of charges (SOCs) by CC/CV mode independently with the even degree of tight regulation, thereby satisfying the ripple requirements for each battery.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.802-805
• /
• 2007

A hardware architecture is presented of a wavelet based multiple line addressing driving scheme for passive matrix displays using the FPGA (Field Programmable Gate Arrays), which will be integrated in the scalable video coding $architecture^{[1]}$. The incoming compressed video data stream will then directly be transformed to the required column voltages by the hardware architecture without the need of employing the video decompression.

• 대한전자공학회논문지SD
• /
• 제43권6호
• /
• pp.9-17
• /
• 2006

SoC(System-On-Chip) 시스템에서 초 저전력 시스템을 구현하기 위한 dynamic voltage and frequency scaling (DVFS)알고리즘에 사용될 시스템 버스의 다중 코어 전압 레벨을 생성해주는 새로운 다계층(multi-level) 코어 전압용 high-speed level up/down Shifter 회로를 제안한다. 이 회로는 내부 회로군과 외부 회로군 사이에서 서로 다른 전압레벨을 조정 접속하는 I/O용 level up/down shifter interface 회로로도 동시에 사용된다. 제안하는 회로는 인터페이스 접속에서 불가피하게 발생하는 속도감쇄와 Duty Ratio 불안정 문제를 최소화하는 장점을 갖고 있다. 본 회로는 500MHz의 입력 주파수에서 $0.6V\sim1.6V$의 다중 코어 전압을 각 IP들에서 사용되는 전압레벨로, 또는 그 반대의 동작으로 서로 Up/Down 하도록 설계하였다 그리고 제안하는 I/O 용 회로의 level up shifter는 500MHz의 입력 주파수에서 내부 코어 용 level up shifter의 출력전압인 1.6V를 I/O 전압인 1.8V, 2.5V, 3.3V로 전압레벨을 상승 하도록 설계하였으며, level down shifter는 반대의 동작으로 1Ghz의 입력 주파수에서 동작하도록 설계하였다. 시뮬레이션 및 결과는 $0.35{\mu}m$ CMOS Process, $0.13{\mu}m$ IBM CMOS Process 와 65nm CMOS model 변수를 이용한 Hspice를 통하여 검증하였다. 또한, 제안하는 회로의 지연시간 및 파워소모 분석과 동작 주파수에 비례한 출력 전압의 Duty ratio 왜곡에 대한 연구도 하였다.