• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.5-5
• /
• 2017

Too little and too much water due to climatic events is a significant cause of global food insecurity. Crops are less productive under water-limited conditions and all major crops, with the exception of rice (Oryza sativa), die within a few days of complete submergence. To complement our studies on genes such as SUB1A, (an ERF-VII transcription factor that provides robust submergence tolerance) and AG1 (a TREHALOSE 6-P PHOSPHATASE that promotes establishment of young seedlings underwater), we have retooled INTACT (${\underline{I}}solation$ of ${\underline{N}}uclei$ ${\underline{TA}}gged$ in specific ${\underline{C}}ell$ ${\underline{T}}ypes$) and TRAP (${\underline{T}}ranslating$ ${\underline{R}}ibosome$ ${\underline{A}}ffinity$ ${\underline{P}}urification$) for rice. These technologies enable us to follow dynamics in chromatin, nuclear pre-mRNAs and ribosome-bound mRNAs in meristems and diverse cell types. With these technologies we can better interpret responses to stresses and reestablishment of homeostasis. These include stress acclimation strategies involving changes in metabolism and development, such as dynamics in suberin deposition in sub-epidermal layers of roots that limit water loss under drought and oxygen escape during waterlogging. Our new data uncover dynamic and reversible regulation at multiple levels of gene regulation and provide new insights into processes of stress resilience. Supported by US NSF-PGRP Plasticity (IOS-1238243), Secretome (IOS-1546879) and REU (DBI-146129) grants.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1077-1083
• /
• 2014

Multi-material Additive Manufacturing (AM) is being focused to apply for direct manufacturing of a product. In this paper, a three-dimensional circuit device (3DCD) fabrication technology based on the multi-material AM technology was proposed. In contrast with conventional two-dimensional Printed Circuit Board (PCB), circuit elements and conducting wires of 3DCD are placed in threedimensional configuration at multiple layers of the structure. Therefore, 3DCD technology can improve design freedom of an electronic product. In this paper, 3DCD technology is proposed based on AM technology. Two types of 3DCD fabrication systems were developed based on the Stereolithography and the Fused Deposition Modeling technologies. And the 3DCD samples which have same function were fabricated, successfully.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.25-32
• /
• 2001

Doosan Construction & Engineering Co., Ltd is building a railway tunnel beneath the Soo-Young River connecting MinLak Station and Centum City Station, a section 230, subway line 2, Pusan City, Korea. When completed the tunnel will have a finished inner diameter of 6.5m(21.311) throughout its total length of 840m(420m = 0.52 miles, Two Single Track Tunnel : 420m＋420m). The ground profile of the face toward shield machine is composed of multi layers, silty clay, clayey gravel, soft rock etc. This research paper is to predict ground deformation and variation of stresses around tunnel using Hyperbolic model, and to reflect the works on the next shield tunneling project. And this research paper is analyzed data of measuring instrument (such as settlement gauge, inclinometer, Multiple extensometer, etc.) which is installed along tunnel line for safety of tunnel. For calculations, the finite difference Method is applied. Backfill grouting material is supposed to have instantly strength of 10kg/$\textrm{cm}^2$ above, although its strength is available after 24 hours passed.

• Structural Engineering and Mechanics
• /
• v.61 no.4
• /
• pp.551-561
• /
• 2017

As FGM (functionally graded material) bars which vibrate in axial or longitudinal direction have great potential for applications in diverse engineering fields, developing a reliable mathematical model that provides very reliable vibration and wave characteristics of a FGM axial bar, especially at high frequencies, has been an important research issue during last decades. Thus, as an extension of the previous works (Hong et al. 2014, Hong and Lee 2015) on three-layered FGM axial bars (hereafter called FGM bars), an enhanced spectral element model is proposed for a FGM bar model in which axial and radial displacements in the radial direction are treated more realistic by representing the inner FGM layer by multiple sub-layers. The accuracy and performance of the proposed enhanced spectral element model is evaluated by comparison with the solutions obtained by using the commercial finite element package ANSYS. The proposed enhanced spectral element model is also evaluated by comparison with the author's previous spectral element model. In addition, the effects of Poisson's ratio on the dynamics and wave characteristics in example FGM bars are numerically investigated.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.12 no.4
• /
• pp.263-269
• /
• 2012

The ability to characterize feature objects from radar readings is often limited by simply looking at their still frame reflectivity, differential reflectivity and differential phase data. In many cases, time-series study of these objects' reflectivity profile is required to properly characterize features objects of interest. This paper introduces a novel technique to automatically track multiple 3D radar structures in C,S-band in real-time using Doppler radar and profile their characteristic reflectivity distribution in time series. The extraction of reflectivity profile from different radar cluster structures is done in three stages: 1. static frame (zone-linkage) clustering, 2. dynamic frame (evolution-linkage) clustering and 3. characterization of clusters through time series profile of reflectivity distribution. The two clustering schemes proposed here are applied on composite multi-layers CAPPI (Constant Altitude Plan Position Indicator) radar data which covers altitude range of 0.25 to 10 km and an area spanning over hundreds of thousands $km^2$. Discrete numerical simulations show the validity of the proposed technique and that fast and accurate profiling of time series reflectivity distribution for deformable 3D radar structures is achievable.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.279-282
• /
• 2012

로컬 히스토그램 평활화(LHE)는 영상에서 로컬 정보를 강조하기 위한 효율적인 알고리즘 중 하나이다. 그러나 이 알고리즘은 스펙클 노이즈를 증폭시키는 단점을 가진다. 따라서, 기존의 로컬 히스토그램 평활화 기법을 확장한 다중 레이어 블록 오버랩 히스토그램 평활화 기법을 이용하여 기존 로컬 히스토그램 평활화 기법들의 문제점을 해결하고자 하였다. 이 방법은 3단계-컨트라스트 향상 단계, 노이즈 제거 단계, 통합 단계로 이루어진다. 제안된 방법에서는 기존 방법의 컨트라스트 향상 단계에서 일반적인 로컬 히스토그램 평활화 방법이 아닌 컨트라스트를 제한하는 적응적인 히스토그램 평활화 기법을 적용하고, 노이즈 제거 단계에서 새로운 바이레터럴 필터를 적용하였다. 즉, 기존 방법의 문제점들을 해결하도록 알고리즘을 변형하여 기존 알고리즘의 성능을 개선하였다. 실험 결과는 제안된 방법이 기존의 방법 및 잘 알려진 로컬 히스토그램 평활화 기법들과 비교하여 좋은 성능을 내는 것을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.261-268
• /
• 2011

Generally, modeling procedure of cross section of composite rotor blade is complicated and time-consuming, because it is made up of various stiffeners and multiple layers of composite materials. For efficient modeling of cross section of composite rotor blade, a modeling program so called KSec2D, which provides a user friendly GUI, is developed by using a 2D modeling algorithm based on set operation. By the developed program KSec2D, a modeling of complicated cross section of rotor blade is carried out. Through the demonstration, the usefulness of developed program in modeling procedure of cross section of composite rotor blade is verified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.52-54
• /
• 2006

In the Langmuir-Blodgett (LB) technique, a monolayer on the water surface is transferred onto a substrate, which is raised and dipped through the surface. From this, multi layers can be obtained in which constituent molecules are periodically arranged. The LB technique has attracted considerable interest in the fabrication of electrical and electronic devices. Many researchers have investigated the electrical properties of monolayer and multiplayer films. Dendrimers represent a new class of synthetic macromolecules characterized by a regularly branched treelike structure. Multiple branching yields a large number of chain ends that distinguish dendrimers from conventional star-like polymers and microgels. The azobenzene dendrimer is one of the dendritic macromolecules that include the azo-group exhibiting a photochromic character. Due to the presence of the charge transfer element of the azo-group and its rod-shaped structure, these compounds are expected to have potential interest in electronics and ptoelectronics, especially in nonlinear optics. In the present paper, we give pressure stimulation to organic thin films and detect the induced displacement current.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.543-550
• /
• 2014

A magnet gear composed of two layers of permanent magnets repeated circumferentially can transmit the power without mechanical contact. In the topology called by the magnet shutter gear known as the most competitive concept among the existing concepts, the number of pole-pairs on the high speed rotor corresponds to that of low speed rotor through electric steel set functioning as a magnetic modulator. The methodology is classified into radial type and axial type according to its magnetic path as in the motor. However, the magnetic modulator has multiple poles located separately. So, it is very complicated to assemble each module of the magnet gear mechanically and to sustain a mechanical stiffness of the modulator. The practical trouble can be solved partially through reconfiguring the modules. This paper deals with the novel magnetic shutter gear topology varying the magnetic path and its effectiveness is verified through real hardware implementation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1140-1143
• /
• 2009

Organic Vapor Phase Deposition (OVPD) equipment enables the accurate and simultaneous control of deposition rates of multiple materials as well as their homogenous mixing in the gas phase. Graded or even cross-faded layers by varying carrier gas flow are options to improve OLED performances. As example, we will show how the efficacies of standard red phosphorescent OLEDs with sharp interfaces can be increased from 18.8 cd/A and 14.1 lm/W (1,000 cd/$m^2$) to 36.5 cd/A (+94 %, 18 % EQE) and 33.7 lm/W (+139 %) by the introduction of cross-fading, which is a controlled composition variation in the organic film.