• 제목/요약/키워드: Multiple input

검색결과 2,083건 처리시간 0.024초

입력 위상 잡음 억제 및 체배 주파수의 듀티 사이클 보정을 위한 VCO/VCDL 혼용 기반의 다중위상 동기회로 (A Multiphase DLL Based on a Mixed VCO/VCDL for Input Phase Noise Suppression and Duty-Cycle Correction of Multiple Frequencies)

  • 하종찬;위재경;이필수;정원영;송인채
    • 대한전자공학회논문지SD
    • /
    • 제47권11호
    • /
    • pp.13-22
    • /
    • 2010
  • 본 논문은 입력 클록의 고주파 위상 잡음 억제와 정확한 듀티 사이클을 갖는 체배 주파수 생성을 위하여 Voltage-Controlled Oscillator(VCO)/Voltage-Controlled Delay Line(VCDL) 혼용기반의 다중 위상 Delay-Locked Loop(DLL)를 제시한다. 이 제안된 구조에서, 다중 위상 DLL은 혼용 VCO/VCDL의 입력 단에 nMOS 소스 결합 회로 기반의 이중 입력 차동 버퍼를 사용한다. 이것은 고주파 입력 위상 잡음 억제를 위하여 전 대역 통과 필터 특성을 갖는 기존 DLL의 입/출력 위상 전달을 저주파 통과 필터 특성을 갖는 PLL의 입/출력 위상 전달로 쉽게 변환시킬 수 있다. 또한, 제안된 DLL은 추가적인 보정 제어 루프 없이 단지 듀티 사이클 보정 회로와 위상 추적 루프를 이용하여 체배 주파수의 듀티 사이클 에러를 보정할 수 있다. $0.18{\mu}m$ CMOS 공정을 이용한 시뮬레이션 결과에서, 제안된 DLL의 출력 위상 잡음은 800MHz의 입력 위상 잡음을 갖는 1GHz 입력 클록에 대하여 -13dB 이하로 개선된다. 또한, 40%~60%의 듀티 사이클 에러를 갖는 1GHz 동작 주파수에서, 체배 주파수의 듀티 사이클 에러는 2GHz 체배 주파수에서 $50{\pm}1%$이하로 보정된다.

다변수 시스템의 자기동조제어 (Self-Tuning Control of Multivariable System)

  • 이동철
    • 동력기계공학회지
    • /
    • 제3권4호
    • /
    • pp.69-78
    • /
    • 1999
  • In the single-input and single-output system, the parameter of plant is scalar polynomial, but in the multiple input and multiple output, it accompanies, being matrix polynomial, the consideration of observable controlability index or problems non-commutation in matrix polynomial as well as degree, and it is more complex to deal with. Therefore, it is thought that a full research on the single-input and single-output system is not sufficient. This paper proposes that problems of minimum variance self-tuning regulator by using numerical calculation example of multivariable system and pole assignment self-tuning regulator.

  • PDF

감쇄 환경에서 여러 입력 여러 출력 시스템에 알맞은 혼합 검파 방식 (A Hybrid Detection Technique for Multiple Input Multiple Output Systems in Fading Environment)

  • 오종호;안태훈;송익호;박주호;박소령
    • 한국통신학회논문지
    • /
    • 제31권9C호
    • /
    • pp.897-904
    • /
    • 2006
  • 여러 입력 여러 출력 시스템은 주파수 효율이 높으며, 가장 비슷함 검파기를 쓸 때 성능이 가장 뛰어나다. 가장 비슷함 검파기는 송신 안테나와 별자리의 신호수가 많아지면 지수적으로 복잡해지므로, 성능은 가장 비슷함 검파기보다 떨어지지만 복잡하기는 덜한 영 만들기 검파기가 제안된 바 있다. 이 논문에서는 가장 비슷함 검파기보다 덜 복잡하고 영 만들기 검파기보다 성능이 나은 새로운 검파 기법을 제안한다. 제안한 기법은 신호대잡음비가 높을 때 더욱 효과적임을, 곧, 가장 비슷함 검파기보다 덜 복잡하고 성능은 거의 같음을, 보인다.

Optimal Planar Array Architecture for Full-Dimensional Multi-user Multiple-Input Multiple-Output with Elevation Modeling

  • Abubakari, Alidu;Raymond, Sabogu-Sumah;Jo, Han-Shin
    • ETRI Journal
    • /
    • 제39권2호
    • /
    • pp.234-244
    • /
    • 2017
  • Research interest in three-dimensional multiple-input multiple-output (3D-MIMO) beamforming has rapidly increased on account of its potential to support high data rates through an array of strategies, including sector or user-specific elevation beamforming and cell-splitting. To evaluate the full performance benefits of 3D and full-dimensional (FD) MIMO beamforming, the 3D character of the real MIMO channel must be modeled with consideration of both the azimuth and elevation domain. Most existing works on the 2D spatial channel model (2D-SCM) assume a wide range for the distribution of elevation angles of departure (eAoDs), which is not practical according to field measurements. In this paper, an optimal FD-MIMO planar array configuration is presented for different practical channel conditions by restricting the eAoDs to a finite range. Using a dynamic network level simulator that employs a complete 3D SCM, we analyze the relationship between the angular spread and sum throughput. In addition, we present an analysis on the optimal antenna configurations for the channels under consideration.

상향링크 Massive MIMO 시스템에서 파일럿 할당 알고리즘 (Pilot Assignment Algorithm for Uplink Massive MIMO Systems)

  • 장석주;공한배;이인규
    • 한국통신학회논문지
    • /
    • 제40권8호
    • /
    • pp.1485-1491
    • /
    • 2015
  • 본 논문에서는 상향링크 Massive multiple-input multiple-output 시스템 상황에서의 파일럿 할당 알고리즘을 소개한다. 기존에 제안된 파일럿 할당 알고리즘은 최적 알고리즘에 비해 성능 열화가 크기 때문에, 본 논문에서는 Pre-determined Interference 기법과 Pre-determined Desired-term 기법을 이용한 알고리즘을 제안한다. 제안하는 기법은 최적 알고리즘에 비해 복잡도가 낮음과 동시에 성능 열화가 작다. 실험 결과를 통해 제안하는 기법의 성능을 확인한다.

여러 입력 여러 출력 시스템에서 길이 먼저 살펴보기와 가지 길이 문턱값을 바탕으로 둔 준최적 복호 (Near ML Decoding Based on Metric-First Searching and Branch Length Threshold for Multiple Input Multiple Output Systems)

  • 안태훈;강현구;오종호;송익호;윤석호
    • 한국통신학회논문지
    • /
    • 제34권8C호
    • /
    • pp.830-839
    • /
    • 2009
  • 이 논문에서는 여러 입력 여러 출력 시스템에 알맞은 준최적 복호 방법을 하나 다룬다. 제안한 방법은 길이 먼저 살펴보기로 바탕으로 둔 바, 슈노르-오히너 늘어놓기와 가지 길이 문턱값을 써서 신호를 복호하는 데 드는 계산량을 줄인다. 제안한 방법의 비트오류율 성능은 최적 성능에 매우 가까우면서 계산량은 다른 준최적 복호기들보다 적다는 것을 모의실험으로 보인다.

Multiple-Input Multiple-output system을 위한 Low-Density Parity-Check codes 설계 (Design of Low-Density Parity-Check Codes for Multiple-Input Multiple-Output Systems)

  • 신정환;채현두;한인득;허준
    • 한국통신학회논문지
    • /
    • 제35권7C호
    • /
    • pp.587-593
    • /
    • 2010
  • 본 논문에서는 extrinsic information transfer (EXIT) chart를 이용하여 다중 안테나 시스템에서 irregular low-density parity-check (LDPC) code를 설계하는 방법을 기술한다. 다중 안테나 기반의 Irregular LDPC code 설계를 위하여 maximum a posteriori probability (MAP) 방식의 다중 안테나 검출 방식이 사용되었으며 수신기는 다중 안테나 검출기와 LDPC 복호기 사이에서 복호된 soft 정보를 주고 받는 turbo iterative 구조를 가정하였다. 다중 안테나 기반의 irregular LDPC code의 edge degree 분포는 EXIT chart와 linear optimization programming 기법을 사용하여 얻을 수 있으며 컴퓨터 시뮬레이션을 통하여 제안된 방법으로 설계된 irregular LDPC code의 성능을 다양한 환경에서 검증하였다.

An Adaptive-Harvest-Then-Transmit Protocol for Wireless Powered Communications: Multiple Antennas System and Performance Analysis

  • Nguyen, Xuan Xinh;Do, Dinh-Thuan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권4호
    • /
    • pp.1889-1910
    • /
    • 2017
  • This paper investigates a protocol so-called Adaptive Harvest Then Transmit (AHTT) for wireless powered communication networks (WPCNs) in multiple-input single-output (MISO) downlink systems, which assists in transmitting signals from a multi-antenna transmitter to a single-antenna receiver. Particularly, the power constrained relay is supplied with power by utilizing radio frequency (RF) signals from the source. In order to take advantage of multiple antennas, two different linear processing schemes, including Maximum Ratio Combining (MRC) and Selection Combination (SC) are studied. The system outage capacity and ergodic capacity are evaluated for performance analysis. Furthermore, the optimal power allocation is also considered. Our numerical and simulation results prove that the implementation of multiple antennas helps boost the energy harvesting capability. Therefore, this paper puts forward a new way to the energy efficiency (EE) enhancement, which contributes to better system performance.

Unified Optimal Power Allocation Strategy for MIMO Candidates in 3GPP HSDPA

  • Kim, Sung-Jin James;Kim, Ho-Jin;Lee, Kwang-Bok
    • ETRI Journal
    • /
    • 제27권6호
    • /
    • pp.768-776
    • /
    • 2005
  • We compare the achievable throughput of time division multiple access (TDMA) multiple-input multiple-output (MIMO) schemes illustrated in the 3rd Generation Partnership Project (3GPP) MIMO technical report, versus the sum-rate capacity of space-time multiple access (STMA). These schemes have been proposed to improve the 3GPP high speed downlink packet access (HSDPA) channel by employing multiple antennas at both the base station and mobile stations. Our comparisons are performed in multi-user environments and are conducted using TDMA such as Qualcomm's High Data Rate and HSDPA, which is a simpler technique than STMA. Furthermore, we present the unified optimal power allocation strategy for HSDPA MIMO schemes by exploiting the similarity of multiple antenna systems and multi-user channel problems.

  • PDF

3차원 기동표적을 사용한 수정된 상호작용 다중모델필터의 성능 분석 (Performance Evaluation of the Modified Interacting Multiple Model Filter Using 3-D Maneuvering Target)

  • 최성린;김기철;김용식;홍금식
    • 제어로봇시스템학회논문지
    • /
    • 제7권5호
    • /
    • pp.445-453
    • /
    • 2001
  • The multiple targets tracking problem has been one of the main issues in the radar applications area in the last decade. Besides the standard Kalman filtering, various methods including the variable dimen-sion filter, input estimation filter, interacting multiple model(IMM) filter, dederated variable dimension filter with input estimation, etc., have proposed to address the tracking and sensor fusion issues. In this pa- per, two existing tracking algorithm, i.e, the IMM filter and the variable dimension filter with input estima-tion(VDIE), are combined for the purpose of improving the tracking performance for maneuvering targets. To evaluate the tracking performance of the proposed algorithm, three typical maneuvering patterns, i.e., waver, pop-up, and high-diver motions, are defined and are applied to the modified IMM filter as well as the standard IMM filter. The smaller RMS tracking errors, in position and velocity, of the modified IMM filter than the standard IMM filter are demonstrated though computer simulations.

  • PDF