• 제목/요약/키워드: Multiple Streams Model

검색결과 35건 처리시간 0.02초

고분자 공정에 적용할 수 있는 일반화된 공정-저장조 망구조 최적설계 (Optimal Design of Generalized Process-storage Network Applicable To Polymer Processes)

  • 이경범;이의수
    • Korean Chemical Engineering Research
    • /
    • 제45권3호
    • /
    • pp.249-257
    • /
    • 2007
  • 사각파 모형은 회분식 공정-저장조 망구조의 최적설계에 성공적으로 적용되었다. 설계된 망구조는 재순환 흐름을 포함하는 회분식의 모든 생산 재고 및 분배 체계를 내포한다. 본 연구에는 사각파 모형의 적용범위를 연속 또는 회분식 공정 뿐 만 아니라 반연속 공정에 까지 확대하려 한다. 이전의 연구에서는 원료조성이나 제품수율은 알려진 상수로 취급되었다. 본 연구에서는 이러한 제약이 완화되어 원료조성이나 제품 수율이 최적화 되어져야 하는 독립변수로 취급된다. 이러한 수정은 정유공장에서 흔히 접하는 최적제품 배합문제를 취급할 수 있게 한다. 원료조성과 제품수율이 독립변수일 때 발생하는 많은 문제의 복잡성에도 불구하고 사각파 모형은 여전히 해석적인 최적용량 공식을 제공한다. 최적공장설계에 적용되는 본 연구의 유용성은 고밀도 폴리에틸렌 공장설계의 예를 통해 나타내었다. 연구결과를 토대로 모든 공정의 최적성을 비교할 수 있는 척도를 제시하였다. 이 척도는 다수의 공정의 성능을 직접 비교할 수 있게 하므로 공정의 상태를 진단하는 유용한 도구가 될 것이다. 공정의 비용이 유속의 제곱근에 비례한다는 결과는 공장설계에서 늘리 알려진 6/10 경험법칙과 유사하다.

국내 중소하천에 설치된 아이스하버 어도 내부 흐름 특성 규명 (Investigation for flow characteristics of ice-harbor type fishway installed at mid-sized streams in Korea)

  • 백경오;민병조
    • 한국수자원학회논문집
    • /
    • 제55권1호
    • /
    • pp.33-42
    • /
    • 2022
  • 본 연구에서는 3차원 상용 수치모형 Flow-3D를 활용하여 상류 수위(유입유량) 변동, 격벽의 간격(pool의 길이) 변화, 잠공 유무 등에 따른 아이스 하버 어도 내 흐름 양상을 분석하였다. 수치모의 결과의 적합성을 입증하기 위해 경안천 대곡교 하류에 설치된 실제 어도에서 3차원 초음파 유속계를 사용하여 어도 출구부 단면 유속과 유량을 관측하였다. Flow-3D 모형에는 난류 모듈로 4가지를 선택할 수 있는데, 관측 자료로 검증 결과 RNG 모형이 아이스하버 어도 내 흐름 특성을 가장 잘 재현하였다. 하천의 유량 전량이 어도로만 유입되어 흐른다는 조건에서 수위 변화에 따른 어도 내 유속구조를 모의해 보았다. 그 결과 최저수위에서는 잠입류와 표면류가 혼재하여 발생하였는데, 최저수위에서 약 10 cm 이상만 수위가 상승하여도 모든 pool에서 잠입류가 사라지고 오직 표면류만 발생하였다. 예상과 달리 수위가 조금 상승해도 흐름이 꽤 단순하게 표면류 위주로 발생하였다. 격벽간 간격을 늘려주면 수위가 상승하더라도 잠입류와 표면류가 혼재되어 나타나는 현상이 지속되었다. 그리고 격벽 하단에 잠공이 있는 경우가 없는 경우에 비해 잠입류가 여러 pool에서 생성되는 경향을 보였다. 보다 적극적인 어도 사후 관리로 잠공 폐색을 막아 어도 내 다양한 흐름이 생성될 수 있도록 유도하는 것이 필요해 보인다.

MPEG-2 TS 기반의 UHDTV 다중화 (Multiplexing of UHDTV Based on MPEG-2 TS)

  • 장의덕;박동일;김재곤;이응돈;조숙희;최진수
    • 방송공학회논문지
    • /
    • 제15권2호
    • /
    • pp.205-216
    • /
    • 2010
  • 본 논문에서는 UHDTV(Ultra HDTV)를 위한 MPEG-2 Transport Stream(TS)의 다중화 기법 및 다중화 SW 툴의 설계 및 구현에 대해서 기술한다. 대용량의 UHD 비디오를 처리하기 위해서는 당분간 병렬처리에 기반한 코덱 구현이 불가피하며 이로 인해 다수의 비디오 비트스트림 간의 동기화 및 다중화가 요구된다. 본 논문에서는 4K(또는 8K) 해상도의 UHD 비디오가 4 개의 화면으로 분할되어 각각 H.264/AVC로 부호화되고, 2 개의 5.0 채널의 오디오가 AC-3로 부호화되는 병렬처리 기반의 UHDTV의 TS 다중화를 고려한다. H.264/AVC와 AC-3를 TS로 전송하기 위한 MPEG-2 시스템(Systems) 확장 규격을 반영한 PES 패킷화 및 TS 다중화 툴을 설계한다. 또한 T-STD(TS System Target Decoder)의 타이밍 모델을 만족하도록 T-STD에 정의된 버퍼들의 상태를 모니터링 하면서 다중화 스케쥴링을 수행하고, 한 TS 패킷의 전송 시간 단위로 H/W의 실시간 처리를 에뮬레이션(emulation)하도록 구현한다. UHDTV 다중화를 위해서 재다중화(Re-multiplexing)를 포함하는 UHD 재다중화와 단일 TS로 다중화하는 UHD 프로그램 다중화의 2 가지 구조를 구현하고 이들의 장단점에 대해서 고찰한다. 본 논문에서 설계 구현된 TS 다중화 툴은 상용 분석 툴 및 실시간 재생 툴을 이용하여 규격 및 타이밍의 적합성과 그 기능을 검증한다.

지속적 제품관여도와 소비자 요구신뢰수준 간의 영향관계: 인지된 위험의 매개 역할에 대한 실증분석을 중심으로 (The Mediating Role of Perceived Risk in the Relationships Between Enduring Product Involvement and Trust Expectation)

  • 홍일유;김태하;차훈상
    • Asia pacific journal of information systems
    • /
    • 제23권4호
    • /
    • pp.103-128
    • /
    • 2013
  • When a consumer needs a product or service and multiple sellers are available online, the process of selecting a seller to buy online from is complex since the process involves many behavioral dimensions that have to be taken into account. As a part of this selection process, consumers may set minimum trust expectation that can be used to screen out less trustworthy sellers. In the previous research, the level of consumers' trust expectation has been anchored on two important factors: product involvement and perceived risk. Product involvement refers to the extent to which a consumer perceives a specific product important. Thus, the higher product involvement may result in the higher trust expectation in sellers. On the other hand, other related studies found that when consumers perceived a higher level of risk (e.g., credit card fraud risk), they set higher trust expectation as well. While abundant research exists addressing the relationship between product involvement and perceived risk, little attention has been paid to the integrative view of the link between the two constructs and their impacts on the trust expectation. The present paper is a step toward filling this research gap. The purpose of this paper is to understand the process by which a consumer chooses an online merchant by examining the relationships among product involvement, perceived risk, trust expectation, and intention to buy from an e-tailer. We specifically focus on the mediating role of perceived risk in the relationships between enduring product involvement and the trust expectation. That is, we question whether product involvement affects the trust expectation directly without mediation or indirectly mediated by perceived risk. The research model with four hypotheses was initially tested using data gathered from 635 respondents through an online survey method. The structural equation modeling technique with partial least square was used to validate the instrument and the proposed model. The results showed that three out of the four hypotheses formulated were supported. First, we found that the intention to buy from a digital storefront is positively and significantly influenced by the trust expectation, providing support for H4 (trust expectation ${\rightarrow}$ purchase intention). Second, perceived risk was found to be a strong predictor of trust expectation, supporting H2 as well (perceived risk ${\rightarrow}$ trust expectation). Third, we did not find any evidence of direct influence of product involvement, which caused H3 to be rejected (product involvement ${\rightarrow}$ trust expectation). Finally, we found significant positive relationship between product involvement and perceived risk (H1: product involvement ${\rightarrow}$ perceived risk), which suggests that the possibility of complete mediation of perceived risk in the relationship between enduring product involvement and the trust expectation. As a result, we conducted an additional test for the mediation effect by comparing the original model with the revised model without the mediator variable of perceived risk. Indeed, we found that there exists a strong influence of product involvement on the trust expectation (by intentionally eliminating the variable of perceived risk) that was suppressed (i.e., mediated) by the perceived risk in the original model. The Sobel test statistically confirmed the complete mediation effect. Results of this study offer the following key findings. First, enduring product involvement is positively related to perceived risk, implying that the higher a consumer is enduringly involved with a given product, the greater risk he or she is likely to perceive with regards to the online purchase of the product. Second, perceived risk is positively related to trust expectation. A consumer with great risk perceptions concerning the online purchase is likely to buy from a highly trustworthy online merchant, thereby mitigating potential risks. Finally, product involvement was found to have no direct influence on trust expectation, but the relationship between the two constructs was indirect and mediated by the perceived risk. This is perhaps an important theoretical integration of two separate streams of literature on product involvement and perceived risk. The present research also provides useful implications for practitioners as well as academicians. First, one implication for practicing managers in online retail stores is that they should invest in reducing the perceived risk of consumers in order to lower down the trust expectation and thus increasing the consumer's intention to purchase products or services. Second, an academic implication is that perceived risk mediates the relationship between enduring product involvement and trust expectation. Further research is needed to elaborate the theoretical relationships among the constructs under consideration.

UMA를 위한 유틸리티 기반 MPEG-21 비디오 적응 (Utility-Based Video Adaptation in MPEG-21 for Universal Multimedia Access)

  • 김재곤;김형명;강경옥;김진웅
    • 방송공학회논문지
    • /
    • 제8권4호
    • /
    • pp.325-338
    • /
    • 2003
  • 가변의 자원제한(resource constraint) 및 사용자 선호(preference)를 만족하기 위한 비디오 적응(adaptation)은 다양한 사용자 단말과 이종망을 통한 범용적멀티미디어접근(Universal Multimedia Access: UMA)을 위한 주요 요소기술이다. 기존의 많은 비디오 적응 기법이 존재하지만 주어진 자원제한을 만족하는 최적의 적응을 제공하기 위한 체계적인 기법은 제시되지 못하였다. 본 논문에서는 체계적인 최적의 적응을 제공하기 위하여, 적응단위를 정의하는 비디오 엔티티(entity), 주어진 자원제한을 나타내는 리소스(resource), 적용 가능한 적응동작을 규정하는 적응(adaptation), 각 적응결과 비디오 품질(quality)을 나타내는 유틸리티(utility)의 관계를 모형화하는 개념적인 적응 프레임워크를 제시하고자 한다. 본 프레임워크는 다양한 형태의 적응의 문제를 제한된 자원에서 유틸리티를 최대화하는 문제(resource-constrained utility maximization)로 정형화(formulation)할 수 있도록 한다. 본 논문에서는 이 프레임워크를 프레임 제거(frame dropping)과 DCT 계수 제거(coefficient dropping)을 이용한 MPEG-4 압축 비디오의 비트율 적응의 실제적인 예에 적용한다. 또한 상호연동 가능한(interoperable) 형태로 터미널 및 네트워크 QoS(quality of Service)를 제공하기 위한 툴로 MPEG-21 Digital Item Adaptation(DIA)에 채택된 기술자(descriptor)를 제시한다. 이 기술자는 본 프레임워크의 적응-리소스-유틸리티의 관계를 유틸리티 함수(utility function)를 이용하여 기술(description)한다. 실험을 통하여 본 논문의 표준 기술자를 사용하는 적응 프레임워크의 타당성을 보인다.다. 특정시기 가곡향유의 실질은 곧 가곡의 곡 해석방식에 직결될 것이기 때문이다.를 선택하는가 하는 디자이너 측면의 요인이 감성 품질과 밀접함 관련이 있음을 알 수 있었다.멘트들의 재배열이 주된 역할을 하는 것으로 해석할 수 있다. 한편 고자장 영역에서는 correlation time 중 $\tau$가 주된 역할을 담당하는데는 $\tau$는 나노 입자의 크기와 연관되어 있으며 고자장에서 입자 크기에 따른 T1 이완율(R1)과 T2 이완율(R2)의 차이는 이러한 입자크기의 차이에 의해 발생하는 것으로 해석할 수 있다. 나노입자에 포함된 철 원자수를 변화시키는 경우 철 원자수가 증가 할 수록 R1과 R2가 증가하는 결과를 나타내었다. 한편 온도변화에 따른 T1, T2 자기이완시간의 변화는 정상체온 근처의 제한적인 온도범위내에서 저자장 영역에서의 아주 작은 변화를 제외하고는 큰 차이를 보이지 않았으나 T1에 비해 T2에서 이러한 변화가 상대적으로 더 작게 나타났다. 결론 : 임상적 다기능성을 나타낼 가능성이 많은 것으로 보고되고 있는 미세 초상자성 산화철 입자의 자기이완에 대한 이론적 모델을 초상자성 나노입자의 물리적 특성에 기초하여 제시하였고 이러한 이론적 모델에 근거한 미세 초상자성 산화철 입자의 자기장의 세기에 따른 자기 이완시간의 변화를 컴퓨터 모의 실험을 통해 조사하였다.다.있는 것으로 보여진다. 따라서 혈압 저하를 목적으로 하는 나트륨 제한식의 실시는 다양한 체내의 생화학적 변화를 고려해서 이루어져야 할 것이며, 앞으로 이에 대한 보다 다각적인 연구가 요구된다.CSU-23 배양배지에서 배양하는 것이 좋다는 결과를 얻었다. and those a having sufficient sleep were found to be subject to less stress. Those interested in their health were found