• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.905-914
• /
• 2016

This paper proposes a new phase current reconstruction technique for interleaved three-phase bidirectional dc-dc converters using a single current sensor. In the proposed current reconstruction algorithm, a single current sensor is employed at the dc-link, and the dc-link current information is sampled at either the peak or valley point of the pulse-width modulation (PWM) carriers regularly. From the obtained current information, all phase currents are reconstructed in a single PWM cycle. After that, the digital current controller is applied to achieve current balancing in each phase. Compare to the previous multiple current sensor method, the proposed strategy reduces the number of the current sensors in the interleaved three-phase bidirectional converter as well as reducing potential current sensing error caused by non-ideal characteristics of the multiple current sensors. The effectiveness of the proposed method is verified from the experiments based on a 3kW three-phase bidirectional converter prototype for the automotive battery charging application.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.268-272
• /
• 2012

A propulsion controller for vehicles should be designed to overcome a sensor failure during a flight, and it is necessary to control the system properly at any circumstances. Therefore, the vehicles need to retain reliability on the sensor measurements by implementing extra sensors to replace the original control sensors in case of their failure. This paper presents the MIMO NARX model by simulation which substitutes measured values with estimated ones by the state estimation technique in case of a sensor failure in a turbojet engine. It is also presented that the NARX model can be adapted as an engine model in HILS equipments.

• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.124-130
• /
• 2023

Implementing flexible production systems in domestic and foreign automotive design parts assembly has increased demand for automation and power reduction. Consequently, transition to a hybrid production method is observed where multiple vehicles are assembled in a single assembly line. Multiple robots, 3D vision sensors, mounting positions, and correction software have complex configurations in the automotive glass mounting system. Hence, automation is required owing to significant difficulty in the assembly process of automobile parts. This study presents a primer lighting and inspection algorithm that is robust to the assembly environment of real automotive design parts using high power 'ㄷ'-shaped LED inclined lighting. Furthermore, a 2D camera was developed in the primer coating inspection system-the core technology of the glass mounting system. A primer application demo line applicable to the actual automobile production line was established using the proposed high power lighting and algorithm. Furthermore, application inspection performance was verified using this demo system. Experimental results verified that the performance of the proposed system exceeded the level required to satisfy the automobile requirements.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.165-176
• /
• 1996

Hand posture and force, which define aspects of the way an object is grasped, are features of robotic manipulation. A means for specifying these grasping "flavors" has been developed that uses an instrumented glove equipped with joint and force sensors. The new grasp specification system is being used at the Pennsylvania State University (Penn State) in a Virtual Reality based Point-and-Direct (VR-PAD) robotics implementation. In the Computer Integrated Manufacturing (CIM) Laboratory at Penn State, hand posture and force data were collected for manipulating bricks and other items that require varying amounts of force at multiple pressure points. The feasibility of measuring desired grasp characteristics was demonstrated for a modified Cyberglove impregnated with FSR (Force Sensitive Resistor) pressure sensors in the fingertips. A joint/force model relating the parameters of finger articulation and pressure to various lifting tasks was validated for the instrumented "wired" glove. Operators using such a modified glove may ultimately be able to configure robot grasping tasks in environments involving hazardous waste remediation, flexible manufactruing, space operations and other flexible robotics applications. In each case, the VR-PAD approach improved the computational and delay problems of real-time multiple- degree-of-freedom force feedback telemanipulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.846-851
• /
• 2010

A liquid-air interface sensing system using the flat end surfaces of a fused-silica fiber coupler has been demonstrated. The principle is based on the additional optical loss caused by changing the refractive index of the external material at the boundary of the end face made of a fiber. The immersion characteristics of this system with respect to the different splitting ratios of the couplers were investigated to determine the sensitivity when it responses to water and air. These experimental data are very useful for selecting the coupling ratio of a coupler in order to develop a multiple sensing probe system. In the proposed sensor structure, it can be emphasize that the sensing probe can be appropriately arrayed on the basis of splitting ratio of the coupler. As a result, it is expected that the proposed liquid-air interface sensors can also be applied to monitor flooding that occurs in multiple areas at the same time.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.105-116
• /
• 2006

This research introduces the method to measure cross-slope using Road Safety Survey and Analysis Vehicle(RoSSAV) with multiple sensors. Cross-slope is an important element like horizontal alignment and vertical alignment in evaluating safety of the roads. In many cases, cross-slope is different from drawings due to frequent overlays. It is extremely difficult to measure cross slope at the roads which has huge traffic volume. Therefore, the algorithm, which can be used when driving the RoSSAV with CPS/INS and Laser Scanner sensors was developed for measuring the cross-slop. Also, in order to examine the algorithm, the superelevation was measured by Laser Scanner and GPS/INS system during travelling and the result was verified by statistical verification.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.87-93
• /
• 2013

The selection of the temperature sensor in a cryogenic system depends on the temperature range, shape, and accuracy. An accurate temperature sensor is essential for improving the reliability of an experiment. We have developed a calibration system for cryogenic temperature sensors using a two-stage cryocooler. To reduce the heat load, a thermal shield is installed at the first stage with multiple layer insulation (MLI). We have also developed a sensor holder for calibrating more than 20 sensors simultaneously in order to save time and reduce costs. This system can calibrate sensors at variable temperatures via temperature control using a heater. In this paper, we present the design and fabrication of the temperature sensor calibration system and a representative experimental result.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.67-75
• /
• 2010

This paper presents localization algorithm for mobile robot in outdoor environment. Outdoor environment includes the uncertainty on the ground. Magnetic sensor or IMU(Inertial Measurement Unit) has been used to estimate robot's heading angle. Two sensor is unavailable because mobile robot is electric car affected by magnetic field. Heading angle estimation algorithm for mobile robot is implemented using gyro sensor module consisting of 1-axis gyro sensors. Localization algorithm applied Extended Kalman filter that utilized GPS and encoder, gyro sensor module. Experiment results show that proposed localization algorithm improve considerably localization performance of mobile robots.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.26-37
• /
• 2009

This paper suggests a sensor's placement method for detecting the dilemma zone problem when real-time driver's safety service is provided at signalized intersections by multiple pointed traffic sensors using USN environments. For detecting the dangerous situations from vehicles accelerating through yellow intervals, red-light running and stopping abruptly like as dilemma zone problem, VISSIM(microscopic, behavior-based multi-purpose traffic simulation program) is used to perform a real-time multiple detection situation by changing the input data like as various inflow-volume, design speed change, driver perception and response time. As a result, the optimal interval of traffic sensors is 20~27m, and the initialized sensor location from stop-line is different according to road design speed. Moreover, the pattern of detection about dilemma zone is also different according to inflow-volumes. This paper shows that the method is useful to evaluate the sensor's placement problem based on micro-simulation and the results can be used as the basic research for USN services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1416-1426
• /
• 2021

In the case of a scanning type multi-channel LiDAR sensor, the distance error called a walk error may occur due to a difference in received signal power. This work error causes different distance values to be output for the same object when scanning the surrounding environment based on multiple LiDAR sensors. For minimizing walk error in overlapping regions when scanning all directions using multiple sensors, to calibrate distance for each channels using convolution on external system. Four sensors were placed in the center of 6×6 m environment and scanned around. As a result of applying the proposed filtering method, the distance error could be improved by about 68% from average of 0.5125 m to 0.16 m, and the standard deviation could be improved by about 48% from average of 0.0591 to 0.030675.