• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.776-782
• /
• 2002

The experimental model of arc sensor in $CO_2$ arc welding has been individually developed according to welding condition and welding procedure. Therefore, the development of new arc sensor having the features of all conventional arc sensor is important in point of its application to various welding environment. In this study, the arc sensor experimental models comprised of a regression model and noise term were formulated using conventional arc sensing algorithm such as current area difference, current integration difference and weaving end current difference method, and their features were observed. The new regression arc sensor model was suggested using multiple linear regression analysis using current variables as independent variables of regression analysis. The artificial neural network model was also suggested where current variables and offset distance was used input/out variables of input/output node.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.406-415
• /
• 2009

In this work, we consider performance modeling of a wireless sensor network with a time division multiple access (TDMA) media access protocol with slot reuse. It is assumed that all the nodes are peers of each other and they have two modes of operation, active and sleep modes. We model the sensor network as a Jackson network with unreliable nodes with on and off states. Active and sleep modes of sensor nodes are modeled with on and off states of unreliable nodes. We determine the joint distribution of the sensor node queue lengths in the network. From this result, we derive the probability distribution of the number of active nodes and blocking probability of node activation. Then, we present the mean packet delay, average sleep period of a node and the network throughput. We present numerical results as well as simulation results to verify the analysis. Finally, we discuss how the derived results may be used in the design of sensor networks.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.4
• /
• pp.46-49
• /
• 2012

The selection of the temperature sensor in the cryogenic system depends on the temperature range, shape and accuracy. The accuracy of the temperature sensor is essential to improve the reliability of experiment. We have developed the variable temperature cryostat using a two-stage cryocooler. In order to reduce heat load, thermal shield is installed at the first stage with MLI (Multiple layer insulation). We have also developed the sensor holder calibrating more than twenty sensors at the same time for saving time and money. The system can calibrate sensor at variable temperature by controlling electric heater. In this paper, we present design and fabrication of variable temperature cryostat and representative result of Cernox sensor calibration.

• Journal of information and communication convergence engineering
• /
• v.13 no.2
• /
• pp.105-112
• /
• 2015

The estimation of missing sensor values is an important problem in sensor network applications, but the existing approaches have some limitations, such as the limitations of application scope and estimation accuracy. Therefore, in this paper, we propose a new estimation model based on a spatial-temporal correlation analysis (STCAM). STCAM can make full use of spatial and temporal correlations and can recognize whether the sensor parameters have a spatial correlation or a temporal correlation, and whether the missing sensor data are continuous. According to the recognition results, STCAM can choose one of the most suitable algorithms from among linear interpolation algorithm of temporal correlation analysis (TCA-LI), multiple regression algorithm of temporal correlation analysis (TCA-MR), spatial correlation analysis (SCA), spatial-temporal correlation analysis (STCA) to estimate the missing sensor data. STCAM was evaluated over Intel lab dataset and a traffic dataset, and the simulation experiment results show that STCAM has good estimation accuracy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.137-142
• /
• 2017

Recently, along with the development of IoT technology, technologies for wirelessly sensing various data, such as sensor nodes, RFID, CCTV, smart phones, etc., have rapidly developed, and in the field of multiple applications, to utilize sensor network related technology Have been actively pursued in various fields. Therefore, as GeoSensor utilization increases, query processing systems for efficiently processing 2D data such as spatial sensor data are actively researched. However, existing spatial query processing systems do not support a spatial-temporal data type and a spatial-temporal operator for processing spatial-temporal sensor data. Therefore, they are inadequate for processing spatial-temporal sensor data like GeoSensor. Accordingly, this paper developed a spatial-temporal query processing system, for efficient spatial-temporal query processing of spatial-temporal sensor data in a sensor network.

• Spatial Information Research
• /
• v.21 no.2
• /
• pp.23-33
• /
• 2013

W ith the recent advancement of IoT (Internet of Things) technology, there has been much interest in the spatial query processing which energy-efficiently acquires sensor readings from sensor nodes inside specified geographical area of interests. Therefore, various kinds of spatial query processing algorithms and distributed spatial indexing methods have been proposed. They can minimize energy consumption of sensor nodes by reducing wireless communication among them using in-network spatial filtering technology. However, they cannot optimize multiple spatial queries which w ill be w idely used in IoT, because most of them have focused on a single spatial query optimization. Therefore, we propose a new multiple spatial query optimization algorithm which can energy-efficiently process multiple spatial queries in a sensor network. The algorithm uses a concept of 'query merging' that performs the merged set after merging multiple spatial queries located at adjacent area. Here, our algorithm makes a decision on which is better between the merged and the separate execution of queries. For such the decision making, we additionally propose the cost estimation method on the spatial query execution. Finally, we analyze and clarify our algorithm's distinguished features using the spatial indexing methods of GR-tree, SPIX, CPS.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.91-100
• /
• 2009

Given the increased interest in ubiquitous computing, wireless sensor network has been researched widely. The localization service which provides the location information of mobile user, is one of important service provided by sensor network. Many methods to obtain the location information of mobile user have been proposed. However, these methods were developed for only one mobile user so that it is hard to extend for multiple mobile users. If multiple mobile users start the localization process concurrently, there could be interference of beacon or ultrasound that each mobile user transmits. In the paper, we propose IAL, the localization technique with interference avoidance for multiple mobile nodes in mobile wireless sensor networks. In IAL, interference is prevented by forcing the mobile node to get the permission of localization from anchor nodes. For this, we define LIP packet type for localization initiation by mobile node and LGP packet type for localization grant by anchor node. LRP packet type is used to reject localization by anchor node for interference avoidance. The experimental result shows that the number of interference between nodes are increased in proportion to the number of mobile nodes and IAL provides efficient localization.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.582-587
• /
• 2004

Ultrasonic sensors are widely used in mobile robot applications to recognize external environments, because they are cheap, easy to use, and robust under varying lighting conditions. However, the recognition of objects using a ultrasonic sensor is not so easy due to its characteristics such as narrow beam width and no reflected signal from a inclined object. As one of the alternatives to resolve these problems, use of multiple sensors has been studied. A sequential driving system needs a long measurement time and does not take advantage of multiple sensors. Simultaneous and pulse coding driving system of ultrasonic sensor array cannot measure short distance as the length of the code becomes long. This problem can be resolved by multi-frequency driving of ultrasonic sensors, which allows multi-sensors to be fired simultaneously and adjacent objects to be distinguished. Accordingly, this paper presents a simultaneous and multi-frequency driving system for an ultrasonic sensor array for object recognition. The proposed system is designed and implemented using a DSP and FPGA. A micro-controller board is made using a DSP, Polaroid 6500 ranging modules are modified for firing the multi-frequency signals, and a 5-channel frequency modulated signal generating board is made using a FPGA. To verify the proposed method, experiments were conducted in an environment with overlapping signals, and the flight distances for each sensor were obtained from filtering of the received overlapping signals and calculation of the time-of-flights.

• Journal of KIISE:Databases
• /
• v.36 no.4
• /
• pp.292-305
• /
• 2009

Wireless sensor networks have a lot of application areas such as industrial process control, machine and resource management, environment and habitat monitoring. One of the main objects of using wireless sensor networks in these areas is the event detection. To detect events at a user's request, we need a join processing between sensor data and the predicates of the events. If there are too many predicates of events compared with a node's capacity, it is impossible to store them in a node and to do an in-network join with the generated sensor data This paper proposes a predicate-merge based in-network join approach to efficiently detect multiple events, considering the limited capacity of a sensor node and many predicates of events. It reduces the number of the original predicates of events by substituting some pairs of original predicates with some merged predicates. We create an estimation model of a message transmission cost and apply it to the selection algorithm of targets for merged predicates. The experiments validate the cost estimation model and show the superior performance of the proposed approach compared with the existing approaches.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

This study proposes a monitoring system that effectively watches surroundings by cooperating the various sensor information including image information on a sensor network system. The monitoring system proposed in this paper is developed to watch certain intruders to the internal spaces through the interested region for exceptional time by installing cameras, PIR(Pyroelectric Infrared Ray) sensor and body detectors in such interested regions. Moreover the monitering system is implemented based on the SenWeaver plateform which is a integrated development tools for building wireless sensor network system. In the results of the test that was applied to a practically experimental environment by implementing some interfaces for the proposed system, it was considered that it is possible to watch surroundings effectively using the image information obtained from cameras and multiple sensor information acquisited from sensor nodes.