• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.144-155
• /
• 2004

This paper addresses the issue of position control of a chain of multiple mass-spring-damper (CMMSD) units which can be found in many physical systems. The dynamic model of a CMMSD system with any degrees of freedom is expressed in a closed-form for the convenience of the controller design. Backstepping and model reference adaptive control (MRAC) approaches are then used to develop two adaptive output feedback controllers to control the position of a CMMSD system. The proposed controllers rely on the measurements of the input (force) and the output (position of the mass unit at the end of the chain) of the system without the knowledge of its parameters and internal states. Simulations are used to verify the effectiveness of the controllers

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.415-419
• /
• 2010

A variety of methods for sound source localization have been developed and applied to several applications such as noise detection system, surveillance system, teleconference system, robot auditory system and so on. In the previous work, we proposed the sound source localization using the spatially mapped GCC functions based on TDOA for robot auditory system. Performance of the proposed one for the noise effect and estimation resolution was verified with the real environmental experiment under the single source assumption. However, since multi-talker case is general in human-robot interaction, multiple source localization approaches are necessary. In this paper, the proposed localization method under the single source assumption is modified to be suitable for multiple source localization. When there are two sources which are correlated, the spatially mapped GCC function for localization has three peaks at the real source locations and imaginary source location. However if two sources are uncorrelated, that has only two peaks at the real source positions. Using these characteristics, we modify the proposed localization method for the multiple source cases. Experiments with human speeches in the real environment are carried out to evaluate the performance of the proposed method for multiple source localization. In the experiments, mean value of estimation error is about $1.4^{\circ}$ and percentage of multiple source localization is about 62% on average.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.11
• /
• pp.1159-1167
• /
• 2011

A novel 3D tube scanning technique is proposed. The proposed tube scanning technique is developed for a special tube inspection module which consists of four line-lasers and one camera. Using the scanning module, we can reconstruct the 360 degree shapes of the inner surfaces of a cylindrical tube. From an image frame captured by the camera, we reconstruct a partial tube model based on four laser triangulations. Then by aligning such partial models with respect to a reference tube axis, a complete 3D shape of the tube is reconstructed. The tube axis in each reconstructed frame is aligned with a 3D Euclidean transformation to the reference axis. Several experiments show that the proposed method can align multiple tube axes very accurately and reconstruct 3D shapes of a tube with very low shape distortion.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.9
• /
• pp.693-698
• /
• 2016

A decentralized control method is proposed to enable a group of robots to achieve maximum performance in multisensory target tracking while avoiding collision with the target. The decentralized control was designed based on navigation function formalism. The study showed that the multiple agent system converged to the positions providing the maximum performance by the decentralized controller, based on Lyapunov and Hessian theory. An exemplary simulation was given for a multiple agent system tracking a stationary target.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.159-167
• /
• 2003

This study suggests the hybrid fault diagnosis method of signed digraph (SDG) and partial least squares (PLS). SDG offers a simple and graphical representation for the causal relationships between process variables. The proposed method is based on SDG to utilize the advantage that the model building needs less information than other methods and can be performed automatically. PLS model is built on local cause-effect relationships of each variable in SDG. In addition to the current values of cause variables, the past values of cause and effect variables are inputted to PLS model to represent the Process armies. The measured value and predicted one by dynamic PLS are compared to diagnose the fault. The diagnosis example of CSTR shows the proposed method improves diagnosis resolution and facilitates diagnosis of masked multiple-fault.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.851-858
• /
• 2009

In this study, we propose a new input device using vision technology for positioning of multiple DOFs. The input device is composed of multiple Tags on a transparent table and a vision camera below the table. Vision camera detects LEDs at the bottom of each Tag to derive information of the ID, position and orientation. The information are used to determine position and orientation of remote target DOFs. Our developed approach is very reliable and effective, especially when the corresponding DOFs are from many independent individuals. We show an application example with a SCARA robot to prove the flexibility and extendability.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.490-496
• /
• 1997

This paper describes a new process-plan selection method using a modified Fuzzy Quantification Theory(FQT). The problem of process-plan selection can be characterized by multiple attributes and used subjective, uncertain information. Fuzzy Quantification Theory is used for handling such information because it is a useful tool when human judgment or evaluation is quantified via linguistic variables, and the proposed method is concerned with the selection of a process plan by derivation of the values of categories for each attribute. In this paper, a modified Fuzzy Quantification Theory(FQT) is described and the procedure of this approach is explained and examples illustrated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.1050-1055
• /
• 2006

Since the muiltipath signal arrives at the GPS receiver later than the line-of-sight signal, the multipath signal makes the shape of the correlation function asymmetric. This paper proposes a multipath mitigation method through asymmetry estimation of the correlation function, in which multiple correlators are utilized. The asymmetry is estimated from correlation values of correlators which have different chip spacings. Based on the estimated asymmetry, the correlation function is modified in order to get a better code tracking performance. Even through the proposed method uses multiple correlators including the narrow correlator, the acquisition performance is not degraded since the number of search cell of the narrow correlator part can be reduced in the algorithm of the proposed method. The simulation results show that the proposed method gives better performance than the generic correlator in multipath environment.

• The Journal of Korea Robotics Society
• /
• v.2 no.2
• /
• pp.137-142
• /
• 2007

In an information-oriented society, visually impaired persons also should obtain the information with relative ease. They tend to receive the information of letters by tactile sensation through braille display systems. Several types of braille display systems have been suggested so far, but none of them have been widely used yet. The braille display system should provide multiple lines of braille units to improve the level of understanding. In this paper, we propose a cell type braille unit with $3{\times}2$ dots, each of which consists of a piezoelectric linear motor. A braille cell is small and lightweight enough to be portable, and it can be easily assembled in multiple lines. The preliminary tests using the proposed braille display system show that it can provide the information that can be well perceived by visually impaired persons.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.861-866
• /
• 2013

This paper presents the development of a racing game by controlling multiple smartphones based on ad hoc communication. The proposed racing game by the smartphone-based control interface does not require any specific game console or remote controller. Thus, any multiple users who have smartphones are able to play the game in a monitor at the same time. In addition, the developed game is applicable to actual mobile robots in cases where the positions of all robots are measured, since its game unit is a mobile robot model with a differential drive. An experimental result shows that the racing game in a PC can be realized by the proposed communication interface through four iPhones based on acceleration sensors.