• 품질경영학회지
• /
• 제22권1호
• /
• pp.122-132
• /
• 1994

So far, the Taguchi Method has dealt with multiple quality characteristics under the assumption that they are independent. Since the relationships between quality characteristics are practically important, this study proposes a new performance measure considering the correlation among characteristics. In this paper, we impose weight on each characteristic and correlation among characteristics. The loss function of multiple characteristics is defined in accordance with combination of simple characteristic types, and it is divided into terms of loss that characteristic itself and the correlation among characteristics cause. And the proposed method uses the expected loss of multiple characteristics as the new performance measure. The data in literature are used to compare with the existing performance measures.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.29-40
• /
• 2000

In this paper, under JIT kanban system designed by Moeeni, each performance measures (service level, inventory level) identify the robust optimal level at a uncertain environment, and when there are multiple performance characteristics, it propose the optimal design-method and the optimal level decision-method, which consider multiple performance characteristics.

• ETRI Journal
• /
• 제46권3호
• /
• pp.432-445
• /
• 2024

This paper demonstrates improved throughput and energy efficiency of wireless communications by exploiting nonorthogonal multiple access (NOMA), multiple input-multiple output (MIMO), and radio frequency energy harvesting (EH) technologies. To assess the performance of NOMA MIMO communications with EH (MMe), we consider the nonlinear characteristics of EH devices and propose explicit expressions for throughput and outage probability. Based on our results, the system performance is significantly mitigated by EH nonlinearity and is considerably improved by increasing the number of antennas. Additionally, by appropriately adjusting the system parameters, our NOMA MMe innovation can avert complete outages while optimizing system performance. Moreover, the results demonstrate the superiority of the NOMA MMe over its orthogonal multiple access MMe counterparts.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.99-111
• /
• 1994

Toguchi method is a systematic technique for designing high quality product at low cost. There are three steps in the Toguchi method, 1)system design, 2)parameter design, and 3)tolerance design. This paper considers the tolerance design for multiple performance characteristics which is practically important. We present two tolerance design procedures : grade selection and tolerance determining procedures. In grade selection procedure a scheme is presented that minimizes the sum of the price of low-level characteristics and the expected loss due to the variations of high-level characteristics. In tolerance determining procedure we determine the tolerances of the low-level characteristics.

• 한국통신학회논문지
• /
• 제31권6A호
• /
• pp.563-574
• /
• 2006

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing) 기반 다중 안테나 시스템의 링크레벨 성능 분석을 위하여 실제 전파 환경과 유사한 특성을 갖는 Ray-tracing 방식 채널의 하나인 SCM(Spatial Channel Model) 채널을 구현한다. 3GPP & 3GPP2 Spatial Channel AHG(Ad-hoc Group)에서 시스템레벨 성능 비교용으로 제안한 SCM 채널을 링크레벨 성능의 비교 분석을 위하여, 본 논문에서는 시스템레벨 채널에 대한 채널 계수 및 파라메터들을 링크레벨 성능 비교용으로 변환하여 구현한다. 모의실험을 통하여 구현한 SCM 채널의 특성을 검증하고, 이를 이용하여 기존의 OFDM 기반 MIMO (Multiple Input Multiple Output) 적용 시스템 및 스마트 안테나 적용 시스템에서의 실제적인 링크레벨 성능을 분석하고, 정확한 비교 검증을 위하여 SCM 채널과 동일한 파라메터를 적용한 I-METRA 채널 및 독립 채널 상황에서의 링크 레벨 성능을 함께 비교 분석한다. MIMO 및 스마트 안테나 적용 시스템에 대하여 여러 채널 환경에서 채널 상관도에 따른 링크레벨 성능을 분석함으로써, 채널 상관도의 영향에 따라 주어진 환경에 적합한 다중 안테나 시스템을 제안한다.

• 한국실내디자인학회논문집
• /
• 제18권5호
• /
• pp.40-48
• /
• 2009

This study aimed to analyze the types and characteristics of space forms according to the composition of the stage and auditorium space along with the expression trends in the space of performing arts centers through the cases of modern performing arts centers in America. Today since the purposes of performance are multiple, a variety of stage types are applied to each performing arts center. They use various spaces and performances of multiple purposes by moving and transforming the stage and auditorium according to the kinds of performance as a variation of the arena stage. In today's performing arts centers, the sizes of the stage and auditorium can vary widely, and the performances of many different genres are put to multiple purposes. There appear complex performing arts centers that can plan performing spaces of diverse sizes and forms to fit the functions of a performance in a large building. Since they put on performances in a large space according to the characteristics of the kind of performance, the intentions and goals of the performance are well delivered to the audience.

• Corrosion Science and Technology
• /
• 제19권6호
• /
• pp.302-309
• /
• 2020

This study aimed to predict the pitting corrosion characteristics of AL-6XN super-austenitic steel using multiple linear regression. The variables used in the model are degree of sensitization, temperature, and pH. Experiments were designed and cyclic polarization curve tests were conducted accordingly. The data obtained from the cyclic polarization curve tests were used as training data for the multiple linear regression model. The significance of each factor in the response (critical pitting potential, repassivation potential) was analyzed. The multiple linear regression model was validated using experimental conditions that were not included in the training data. As a result, the degree of sensitization showed a greater effect than the other variables. Multiple linear regression showed poor performance for prediction of repassivation potential. On the other hand, the model showed a considerable degree of predictive performance for critical pitting potential. The coefficient of determination (R2) was 0.7745. The possibility for pitting potential prediction was confirmed using multiple linear regression.

• 한국통신학회논문지
• /
• 제17권7호
• /
• pp.656-665
• /
• 1992

In this paper, the performance of the various multiple access techniques for the mobile computer network has been studiedi in the consideration of the charactersitics of the mobile cimmunication channel. In the case of the hidden node occurring. It could be seen that the performance of the code division multiple access (CDMA) technique with simultaneous access function is better than that of the other packet access methods such as carrier sendsed multiple access (CDMA), busy tone multiple access (BTMA) and idle signal multiple access (ISMA) in the view of the throughput and mean delay time. Also, it has been shown that the performance of the CDMA method is superior to that of other packet access techniques such as multiple access (CSMA), etc. when the fading effect or impulsive noise exists in the mobile channel, Especially, in the case of the distributed mobile network it has been shown that the receivertransmitter based CDMA method using the characteristics of CDMA effectively has better throughput and less mean delay time than the commontransmitter based CDMA technique.

• 품질경영학회지
• /
• 제27권2호
• /
• pp.218-236
• /
• 1999

The purpose of parameter design is to determine optimal settings of design parameters of a product or a process such that the performance characteristics of a product exhibit small variabilities around their target values. Taguchi made significant contributions in this area. However, his analysis of the problem focused on only one performance characteristic or response, although in product and process design, multiple characteristics are more common. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal balance among several different response variables is developed. Existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability function, and EXTOPSIS model.

• 대한산업공학회지
• /
• 제38권3호
• /
• pp.198-207
• /
• 2012

In product or process parameter design, the case of multiple performance characteristics appears more commonly than that of a single characteristic. Numerous methods have been developed to deal with such multi-characteristic parameter design (MCPD) problems. Among these, this paper considers three representative methods, which are respectively based on the desirability function (DF), grey relational analysis (GRA), and principal component analysis (PCA). These three methods are then used to solve the MCPD problems in ten case studies reported in the literature. The performance of each method is evaluated for various combinations of its algorithmic parameters and alternatives. Relative performances of the three methods are then compared in terms of the significance of a design parameter and the overall performance value corresponding to the compromise optimal design condition identified by each method. Although no method is significantly inferior to others for the data sets considered, the GRA-based and PCA-based methods perform slightly better than the DF-based method. Besides, for the PCA-based method, the compromise optimal design condition depends much on which alternative is adopted while, for the GRA-based method, it is almost independent of the algorithmic parameter, and therefore, the difficulty involved in selecting an appropriate algorithmic parameter value can be alleviated.