• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.453-456
• /
• 1992

A Data-based Covariance Matrix(DCM) is introduced in the Eigenvector(EV) method, among subspace methods of estimating multiple sinusoidal frequencies from finite white noisy measurements. It is shown that the EV with the DCM can obtain the true. frequencies from finite noiseless data Some asymptotic results and further improvement on the DCM are also presented mathematically. Monte-carlo simulations are statistically conducted from the view-points of means and standard deviations in the EV's of DCM and Conventional Covariance Matrix(CCM). Simulations show a great promise for using the DCM, particularly for the cases of short data records, closely spaced frequencies and high signal-to-noise ratios.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.388.1-388
• /
• 2002

The sound absorption coefficients for multiple layer perforated plate systems containing several companments with airspaces and porous absorbing materials are estimated using the transfer matrix method developed in the previous paper. The absorption coefficients from transfer matrix method agree well with the values measured by the two-microphone impedance tube method fur various combinations of perforated Plates, airspaces or porous materials. (omitted)

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.280-284
• /
• 2008

In this paper, a best channel matrix selection scheme(BCMS) is proposed to approximate maximum likelihood(ML) detection for a multiple-input multiple-output system. For a one stage BCMS scheme, one of the transmitted symbols is selected to perform ML detection and the other symbols are detected by zero forcing(ZF). To increase the diversity of the symbols that are detected by ZF, multi-stage BCMS detection scheme is used to further improve the system performance. Simulation results show that the performance of the proposed BCMS scheme can approach that of ML detection with a significant reduction in complexity.

• 한국통신학회논문지
• /
• 제40권11호
• /
• pp.2298-2304
• /
• 2015

본 논문은 다중 셀 다중입력 단일 출력 (MISO : multiple-input single-output) 하향링크 능동 안테나 시스템 (AAS : active antenna systems)에서 기지국의 수직 각도를 최적화하는 새로운 기법을 제시한다. 본 연구에서는 기존의 전역 탐색 방식 대신 간단하면서 최적의 값에 근사한 알고리듬들을 제안한다. 먼저, random matrix theory의 특성을 반영하여 평균 전송용량에 large system approximation이 적용된 수직적 빔포밍 알고리듬을 소개한다. 다음으로, signal-to-leakage-and-noise ratio (SLNR)을 기반으로 최적화 문제를 간단하게 만드는 수직적 빔포밍 알고리듬을 제안한다. 실험 결과를 통해 제안된 알고리듬들의 성능이 기존의 전역 탐색 알고리듬에 비해 복잡도가 매우 감소됨에도 불구하고 거의 비슷한 성능을 보임을 증명하였다.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.968-978
• /
• 1999

The effective elastic properties of materials containing spherical inclusions were calculated by the elastic wave scattering theory. In the formulation additional scattering fields by the presence of random multiple scatterers that affects the effective properties were found by the single scattering approximation. In calculating the scattering fields the ensemble average on the displacements and strains inside the scatterer was found from the static approximation at long wavelength limit. The displacements were assumed to be equal to the incident field, while the strains were calculated by Eshelby's equivalent inclusion principle on the single inclusion problem. Four different models were considered and they reflected different degrees of multiple scattering effects based on the approximation introduced in the process of embedding the inclusion in the matrix. The expressions for the effective elastic constants were given in each model, and their relations to the results obtained from other scattering theory and elasticity theory were discussed. The theoretical predictions were compared with experimental results on the epoxy matrix composites containing tungsten particles of different sizes and volume fractions

• 한국항행학회논문지
• /
• 제13권3호
• /
• pp.385-392
• /
• 2009

본 논문은 다중 안테나 시스템에서 연 간섭 제거(SoIC)를 이용한 저 복잡도 최소 평균 제곱 에러(MMSE) 신호 검파 방식을 제안한다. 제안하는 검파 방식은 다중 안테나로부터 송신된 서로 다른 정보 신호를 낮은 복잡도로 검파하기 위하여 복호기와 검파기의 터보 반복 과정에서 검파기의 필터 계수 계산 시 역행렬 연산이 필요한 행렬에 간단한 역행렬 정리를 적용하여 검파 필터의 계수를 구함으로써 반복 수신 당 한번의 역행렬 연산으로 기존의 MMSE 검파 방식과 동일한 필터 계수를 얻을 수 있도록 한다. 또한 일정한 신호 전력을 갖는 변조 방식을 사용하는 시스템의 경우 검파 성능에 영향을 주는 가장 큰 간섭 신호만을 선택하여 제안 방식을 적용함으로써 더욱 낮은 복잡도로 검파기의 필터 계수를 구할 수 있도록 한다. 전산 모의실험을 통하여 제안 방식의 검파 성능을 기존 검파 방식과 비교함으로써 제안하는 검파 방식이 반복 수신기를 사용하는 다중 안테나 시스템에 효과적으로 사용될 수 있음을 보인다.

• 한국통신학회논문지
• /
• 제24권9A호
• /
• pp.1322-1328
• /
• 1999

본 논문에서는 등간격 선형어레이로 입사하는 다중 인코히어런트 평면파의 도래각을 추정하기 위하여 신호부각법과 결합된 MUSIC(SE-MUSIC)을 제안한다. 제안된 SE-MUSIC 알고리즘은 다음 두 가지 과정을 중심으로 이루어진다. (i) 먼저 이상적인 공분산행렬이 갖는 특성을 가지며 Frobenius norm 면에서 추정된 공분산행렬에 가장 가까운 부각된 행렬을 찾고 (ii) 다음으로 부각된 행렬에 MUSIC 방법을 적용하여 입사신호의 도래각을 추정한다. 낮은 신호대 잡음비 환경에서도 제안된 SE-MUSIC이 기존의 MUSIC보다 분해능면이나 통계적 성능 면에서 우수한 성능을 제공함을 컴퓨터 시뮬레이션을 통하여 알 수 있었다.

• 한국통신학회논문지
• /
• 제24권9A호
• /
• pp.1339-1345
• /
• 1999

본 논문에서는 랜덤시퀀스와 Hadamard 행렬을 이용하여 다중 정보를 은폐시킬 수 있는 새로운 디지털 제안하였다. 기존의 디지털 정보은폐에 사용된 기법은 하나의 랜덤시퀀스를 정보신호에 직접 곱하여 정보신호에 에너지 레벨을 매우 낮춤으로서 불법 이용자로 하여금 은폐된 정보의 검출이나 교란을 어렵게 하였다. 그러나 여러 개의 정보를 동일한 디지털 영상에 은폐시킬 경우에는 직교성이 보장되는 은폐코드를 사용해야 하기 때문에 어느 정도 상관성을 갖는 랜덤시퀀스만으로는 정보은폐가 어렵다. 따라서, 본 논문에서는 랜덤시퀀스의 장점과 더불어 직교성을 갖을 수 있도록 같은 행렬을 곱할 때만 정확한 신호로 추출되는 Hadamard 행렬을 랜덤시퀀스와 함께 사용하여 다수의 은폐정보에 대해서도 정확하게 은폐된 신호를 추출할 수 있는 새로운 디지털 정보은폐 방법을 제안하였다.

• Earthquakes and Structures
• /
• 제13권2호
• /
• pp.193-200
• /
• 2017

To overcome the difficulty of performing multi-point response spectrum analysis for engineering structures under spatially varying ground motions (SVGM) using the general finite element code such as ANSYS, an approach has been developed by improving the modelling of the input ground motions in the spectral analysis. Based on the stochastic vibration analyses, the cross-power spectral density (c-PSD) matrix is adopted to model the stationary SVGM. The design response spectra are converted into the corresponding PSD model with appropriate coherency functions and apparent wave velocities. Then elements of c-PSD matrix are summarized in the row and the PSD matrix is transformed into the response spectra for a general spectral analysis. A long-span high-pier bridge under multiple support excitations is analyzed using the proposed approach considering the incoherence, wave-passage and site-response effects. The proposed approach is deemed to be an efficient numerical method that can be used for seismic analysis of large engineering structures under SVGM.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.537-573
• /
• 2015

Multiple-step beams carrying intermediate lumped masses with/without rotary inertias are widely used in engineering applications, but in the literature for free vibration analysis of such structural systems; Bernoulli-Euler Beam Theory (BEBT) without axial force effect is used. The literature regarding the free vibration analysis of Bernoulli-Euler single-span beams carrying a number of spring-mass systems, Bernoulli-Euler multiple-step and multi-span beams carrying multiple spring-mass systems and multiple point masses are plenty, but that of Timoshenko multiple-step beams carrying intermediate lumped masses and/or rotary inertias with axial force effect is fewer. The purpose of this paper is to utilize Numerical Assembly Technique (NAT) and Differential Transform Method (DTM) to determine the exact natural frequencies and mode shapes of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and/or rotary inertias. The model allows analyzing the influence of the shear and axial force effects, intermediate lumped masses and rotary inertias on the free vibration analysis of the multiple-step beams by using Timoshenko Beam Theory (TBT). At first, the coefficient matrices for the intermediate lumped mass with rotary inertia, the step change in cross-section, left-end support and right-end support of the multiple-step Timoshenko beam are derived from the analytical solution. After the derivation of the coefficient matrices, NAT is used to establish the overall coefficient matrix for the whole vibrating system. Finally, equating the overall coefficient matrix to zero one determines the natural frequencies of the vibrating system and substituting the corresponding values of integration constants into the related eigenfunctions one determines the associated mode shapes. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the differential equations of the motion. The calculated natural frequencies of Timoshenko multiple-step beam carrying intermediate lumped masses and/or rotary inertias for the different values of axial force are given in tables. The first five mode shapes are presented in graphs. The effects of axial force, intermediate lumped masses and rotary inertias on the free vibration analysis of Timoshenko multiple-step beam are investigated.