• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제24회 학술발표회 초록집
• /
• pp.195-195
• /
• 2003

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제25회 학술발표회 초록집
• /
• pp.79-79
• /
• 2003

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제22회 학술발표회 초록집
• /
• pp.166-166
• /
• 2002

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제23회 학술발표회 초록집
• /
• pp.179-179
• /
• 2002

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.90.1-90
• /
• 1998

• The Korean Journal of Ceramics
• /
• 제7권1호
• /
• pp.36-40
• /
• 2001

In order to fabricate uncooled IR sensors for pyroelectric applications, multilayered thin films of Pt/PbTiO$_3$/Pt/Ti/Si$_3$N$_4$/SiO$_2$/Si and thermally isolating membrane structures of square-shaped/cantilevers-shaped microstructures were prepared. Cavity was also fabricated via direct silicon wafer bonding and etching technique. Metallic Pt layer was deposited by ion beam sputtering while PbTiO$_3$ thin films were prepared by sol-gel technique. Micromachining technology was used to fabricate microstructured-membrane detectors. In order to avoid a difficulty of etching active layers, silicon-nitride membrane structure was fabricated through the direct bonding and etching of the silicon wafer. Although multilayered thin film deposition and device fabrications were processed independently, these could b integrated to make IR micro-sensor devices.

• 한국전기전자재료학회논문지
• /
• 제23권9호
• /
• pp.681-684
• /
• 2010

The $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ multilayered structure for the transparent electrodes in plasma display panel was designed by essential macleod program (EMP) and the multilayered film was deposited on a glass substrate by direct-current (DC)/radio-frequency (RF) magnetron sputtering system. During film deposition process, the Ag layer in $TiO_2$/Ag/$TiO_2$ structure became oxidized and the filter characteristic was degraded easily. In this study, ZnS layer was adopted as a diffusion blocking layer between $TiO_2$ and Ag to prevent the oxidation of Ag layer efficiently in $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ structure. Based on the AES depth profiling analysis, the Ag layer was effectively protected by the ZnS layer as compared with the $TiO_2$/Ag/$TiO_2$ multilayered films without ZnS as an antioxidant layer. The 3 times stacked $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ films have low sheet resistance of $1.22{\Omega}/{\square}$ and luminous transmittance was as high as 62% in the visible ranges.

• Transactions on Electrical and Electronic Materials
• /
• 제13권4호
• /
• pp.208-211
• /
• 2012

In the present study, a ZnO thin film, as a buffer layer of ITO (indium tin oxide) film was deposited on glass substrates by RF magnetron sputtering at low temperature of $150^{\circ}C$. In order to estimate the optical characteristics and compare with the experimental results in Glass/ZnO(100 nm)/ITO(35 nm) multilayered film, the simulation program, EMP (Essential Macleod Program) was adopted. The sheet resistance and optical transmittance of the films were measured using the four-point probe method and spectrophotometer, respectively. From X-ray diffraction patterns, all the films deposited at $150^{\circ}C$ demonstrated only the amorphous phase. Optical transmittance was the highest at a ZnO thickness of 100 nm. The ITO(35 nm)/ZnO(100 nm) film exhibits an optical transmittance of >92% at 550 nm. The multilayered film showed an electrical sheet resistance of 407 ${\Omega}/sq.$, which is significantly better than that of a single-layer ITO film without a ZnO buffer layer (815 ${\Omega}/sq.$).

• 한국자기학회지
• /
• 제4권3호
• /
• pp.256-262
• /
• 1994

코발트 단위층의 두께가 $2{\AA}$ 및 $4{\AA}$인 두 경우에 대해 막의 총두께가 약 $200{\AA}$인 Co/Pd 다층막을 제조하였으며 이 때 스퍼터링 압력이 자화반전 및 수직자기이방성에 미치는 영향에 대해 연구 하였다. 수직자기이방성 에너저지가 최대치를 보이는 압력이 존재하였으며 $2{\AA}$ 코발트층의 경우 $4{\AA}$ 경우 보다 낮은 압력에서 최대치가 나타났다. 자화시 자구벽 이동은 압력이 높을수록 어려워졌으며 높은 압력에서 는 자구벽 이동으로부터 자기모멘트 회전으로 자화반전기구가 바뀌었다. 또한 코발트층의 두께가 $2{\AA}$인 경우가 $4{\AA}$인 경우보다 수직자기이방성 에너지가 큰 것으로 나타났다.

• 한국자기학회지
• /
• 제3권4호
• /
• pp.269-276
• /
• 1993

Co/Pd 다층박막에서 두 sublayer의 층수비($n_{Co}/n_{Pd}$ = 1/4, 2/4, 3/4, 5/4), 기판온도 ($실온,\;100,\;150,\;200\;^{\circ}C$)를 달리하는 시료를 열진공 증착방법으로 제작하고 이에 대한 Hall 이력곡선을 측정하였다. 이때 나타나는 다야한 형태의 이력곡선을 Co와 Pd sublayer의 자화에 의한 transverse Hall effect 항과 magnetoresistivity 항이 중첩된 것으로 보고 이를 최적 fiting 방법으로 분해하였다. 이 결과 시료 전체의 계면 영역에 걸쳐 강자성과 반강자성인 두 자화상태가 공존하며 이들의 exchange anisotropy의 크기와 반강자성 물질에 의한 강자성 물질의 자벽 고착 효과에 따라 uniaxal 또는 unidirectional easy axis 형의 Hall 이력곡선을 형성하는 것으로 나타났다.