• ETRI Journal
• /
• 제45권3호
• /
• pp.462-478
• /
• 2023

In quantum computing, the use of Pauli frames through software traces of classical computers improves computation efficiency. In previous studies, error correction and Pauli operation tracking have been performed simultaneously using integrated Pauli frames in the physical layer. In such a complex processing structure, the number of simultaneous operations processed in the physical layer exponentially increases as the distance of the surface code encoding logical qubit increases. This study proposes a Pauli frame management architecture partitioned into two layers for a lattice surgery-based surface code and describes its structure and operation rules. To evaluate the effectiveness of our method, we generated a random circuit according to the gate ratios constituting the commonly known quantum circuits and compared the generated circuit with the existing Pauli frame and our method. Simulations show a decrease of about 5% over traditional methods. In the case of experiments that only increase the code distance of the logical qubit, it can be seen that the effect of reducing the physical operation through the logical Pauli frame becomes more important.

• 산업진흥연구
• /
• 제2권2호
• /
• pp.1-6
• /
• 2017

한국전력의 전력을 생산, 수송, 공급하는 3가지 업무분야 중 수송부분을 관리하는 서울전력관리처에 SCADA (Supervisery Control And Data Acquisition) System이 1980년 처음 도입된 후 중앙급전소, 지역급전소, 변전소 업무를 EMS, SCADA, RTU 컴퓨터 설비 3계층의 1:N 식 방사상 형태로 구성하여 HARRIS 6000, BSC, HDLC, L&N, 도시바 등 5개 Protocol로 1200 bps와 9600 bps로 Data Link를 이용하여 왔다. 본 연구는 OSI표준네트워크패킷흐름을 도시하여 DataLink와 Network Layer를 분석하고, 네트워크 3계층을 사용하는 X.25 고속 통신망으로 구성된 한국전력 SCADA 네트워크 모델을 제시하였으며, 통신망을 시험 평가하였다. 현재의 스카다 통신구조를 개선한 미래 스카다 통신구조를 제시하고, SCADA DB 구조를 정의하고, 스카다 기능 구조에 원격 SCADA 게이트웨이 개념을 도입 표준 통신프로토콜을 적용 하였다. 따라서 데이터 전송시간 제약완화, 타지역 타 설비에서의 감시 및 제어의 다중화 및 통신 개방성을 확보하도록 하였다.

• 항공우주시스템공학회지
• /
• 제18권1호
• /
• pp.1-10
• /
• 2024

선행연구에서는 위성체의 고기동 시 전개형 태양전지판으로부터 발생하는 잔여진동을 저감시키기 위해 초탄성 형상기억합금 (Shape Memory Alloy, SMA)을 적용한 적층형 태양전지판 요크를 제안하였다. 요크에는 SMA 양면에 구속층을 적층시키기 위해 점탄성 테이프가 적용되며, 점탄성 테이프는 온도 의존성이 높아 온도에 따라 댐핑 특성 변화로 요크의 진동저감 성능에 직접적인 영향을 미친다. 이에 따라, 온도별 요크의 댐핑 성능을 확인하기 위해 다양한 온도조건에서 자유감쇠시험을 수행하여 댐핑 성능이 가장 극대화되는 온도 구간을 식별하였다. 본 논문에서는 상기 온도시험 결과를 토대로, 요크가 궤도 열환경에 노출되더라도 효과적인 댐핑 성능을 유지할 수 있도록 궤도 열해석을 통해 요크의 열적 거동 및 온도를 예측하였으며, 요크가 최적의 진동저감 성능을 낼 수 있도록 열 설계안 도출 방안에 관해 기술하였다.

• 한국전자파학회논문지
• /
• 제26권8호
• /
• pp.730-739
• /
• 2015

본 논문에서는 6~18 GHz 주파수 범위의 미앤더선로로 구성된 다층 구조의 광대역 원편파 편파기를 설계 및 제작하였다. 미앤더선로-유전체-스페이서의 단위 구성요소에 대한 전송행렬을 경계값 해를 적용하여 제시하였다. 또한, 도파관 모델이 적용되도록 미앤더선로의 배열 구조와 함께 미앤더선로의 등가 서셉턴스를 HFSS 전자기장 해석방법으로 계산하는 방법을 제안하였다. 전자기장 해석방법과 전송행렬을 연동한 하이브리드 방법과 반복 수행법을 이용하여 광대역, 낮은 삽입손실, 낮은 축비 특성을 갖는 다층 구조의 미앤더선로 원편파 편파기를 설계하였다. 제작된 편파기는 동작주파수의 92 % 대역에서 -10 dB 이하의 반사손실과 평균 -0.24 dB의 삽입손실 및 평균 2.6 dB 이하의 축비 특성으로 설계값과 잘 일치함을 확인하였다.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.372-379
• /
• 2013

In this study, we investigated the traits of the clad metals used in hot-rolled clad steel plates. We examined the sensitization and mechanical properties of STS 316 steel plate and carbon steel (A516) under the specific circumstances of post heat treatment and whether a weld was multilayered and thick or repeated because of repairs. The test conditions were as follows. The clad steel plates were butt-welded using FCAW/SAW, and the heat treatment was conducted at $625^{\circ}C$, for 80, 160, 320, 640, or 1280 min. The change in the corrosion resistance was evaluated in these specimens. In the case of the carbon steel (A516), as the heat treatment time increased, the annealing effect caused the tensile strength to decrease. The micro- hardness gradually increased and then decreased after 640 min. The elongation and contraction of the area increased gradually. An oxalic acid etch test and EPR test on STS316, a clad metal, showed a STEP structure and no sensitization. From the test results for the multi-layered and repair welds, it could be concluded that there is no effect on the corrosion resistance of clad metals. In summary, the purpose of this study was to suggest some considerations when developing on-site techniques and evaluate the sensitization of stainless steels.

• Advances in materials Research
• /
• 제5권4호
• /
• pp.299-318
• /
• 2016

Analytical investigations were performed of a longitudinal crack representing a cylindrical surface in circular shafts loaded in torsion with taking into account the non-linear material behavior. Both functionally graded and multilayered shafts were analyzed. It was assumed that the material is functionally graded in radial direction. The mechanical behavior of shafts was modeled by using non-linear constitutive relations between the shear stresses and shear strains. The fracture was studied in terms of the strain energy release rate. Within the framework of small strain approach, the strain energy release rate was derived in a function of the torsion moments in the cross-sections ahead and behind the crack front. The analytical approach developed was applied to study the fracture in a clamped circular shaft. In order to verify the solution derived, the strain energy release rate was determined also by considering the shaft complimentary strain energy. The effects were evaluated of material properties, crack location and material non-linearity on the fracture behavior. The results obtained can be applied for optimization of the shafts structure with respect to the fracture performance. It was shown that the approach developed in the present paper is very useful for studying the longitudinal fracture in circular shafts in torsion with considering the material non-linearity.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.137-150
• /
• 2020

In this paper, the bending behavior of single-walled carbon nanotube-reinforced composite (CNTRC) laminated plates is studied using various shear deformation plate theories. Several types of reinforcement material distributions, a uniform distribution (UD) and three functionally graded distributions (FG), are inspected. A generalized higher-order deformation plate theory is utilized to derive the field equations of the CNTRC laminated plates where an analytical technique based on Navier's series is utilized to solve the static problem for simply-supported boundary conditions. A detailed numerical analysis is carried out to examine the influence of carbon nanotube volume fraction, laminated composite structure, side-to-thickness, and aspect ratios on stresses and deflection of the CNTRC laminated plates.

• Transactions on Electrical and Electronic Materials
• /
• 제10권5호
• /
• pp.165-168
• /
• 2009

Transparent and conducting ITO/Cu/ITO multilayered films were deposited by magnetron sputtering on unheated polycarbonate (PC) substrates. The thickness of the Cu intermediate film was varied from 5 to 20 nm. Changes in the microstructure and optoelectrical properties of ITO/Cu/ITO films were investigated with respect to the thickness of the Cu intermediated layer. The optoelectrical properties of the films were significantly influenced by the thickness of the Cu interlayer. The sandwich structure of ITO 50 nm/Cu 5 nm/ITO 45 nm films had a sheet resistance of $36{\Omega}$/Sq. and an optical transmittance of 67% (contain substrate) at a wavelength of 550 nm, while the ITO 50 nm/Cu 20 nm/ITO 30 nm films had a sheet resistance of $70{\Omega}$/Sq. and an optical transmittance of 36%. The electrical and optical properties of ITO/Cu/ITO films were determined mainly by the Cu film properties. From the figure of merit, it is concluded that the ITO/Cu/ITO films with a 5 nm Cu interlayer showed the better performance in transparent conducting electrode applications than the conventional ITO films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.53-56
• /
• 2000

Piezoelectric ceramics can provide electro-mechanical transduction with high stresses but low displacement. To obtain larger displacements, several mechanical amplifying structures have been used. High alternating displacements can be obtained using resonant structure. In this paper, we designed a bolt-tightened Langevin type ultrasonic vibrator whose resonant frequency is 50[kHz] and ceramics are multilayered. FEM(Finite Element Methode) was employed to calculate. the resonant frequencies and maximum displacements of designed vibrators. The designed resonant frequency and computer calculated frequencies were coincided. When input voltages were increased, the maximum displacements also rose. As AC voltage was applied, the maximum displacement were shown sinusoidal changes. Terminal input admittance over a frequency range spanning the resonant frequency were calculated. ANSYS was used to find resonant frequencies and calculate displacements of vibrators.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.276-276
• /
• 2008

Transparent and conducting indium tin oxide (ITO) and ITO/Nickel/ITO(INI) multilayered films were prepared on glass substrates by a magnetron sputtering without intentional substrate heating. The RF(13.56MHz) and DC power were applied to ITO and Nickel target, respectively. The thickness of ITO, Ni and ITO films were kept constantly at 50, 5 and 45 nm. In order to consider the effect of post deposition vacuum annealing in vacuum on the physical and optoeletrical properties of INI films, optical transmittance, electrical resistivity, crystallinity of the films were analyzed. From the observed result, it may conclude that the optoelectrical properties of the INI films were dependent on the post deposition annealing. For the INI films annealed at $300^{\circ}C$, the films have a polycrystalline structure with (110), (200), (210), (211) and (300). The resistivity of the films were $4.0\times10^{-4}{\Omega}cm$ at room temperature. As the annealing($300^{\circ}C$), resistivity decreased to $2.8\times10^{-4}{\Omega}cm$. And also the optical transmittance decreased from 79 to 70 % at 550nm.