• 공학교육연구
• /
• 제11권1호
• /
• pp.117-125
• /
• 2008

현실에서의 공학적인 문제들은 특정 분야에 한정된 제한된 설계 요소의 단순 집합이라기 보다는, 정량화하기 어렵고 최종적인 해에 도달하기 전에 항상 절충을 해야 하는 보다 광범위한 기술적, 경제적, 사회적 제약요인 들이 혼재된 형태로 존재하고 있다. 이에 기업들은 서로 다른 전공 분야의 지식을 가진 사람들로 팀을 구성하여 이러한 다차원적인 문제를 해결하고 있으며 이러한 교육을 충실히 받은 인재를 필요로 한다. 즉, 오늘날의 공학설계 문제의 특성 자체가 복합학제적인 설계를 요구하고 있는 것이다. 이에 본 논문에서는 미국 대학들의 복합학제 운영사례를 통해 복합학제 설계과제 도출 및 바람직한 복합학제 설계교육의 운영 방안을 제시하였다.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1363-1386
• /
• 2015

The October 23 2011 Van Earthquake is studied from an earthquake engineering point of view. Strong ground motion processing was performed to investigate features of the earthquake source, forward directivity effects during the rupture process as well as local site effects. Strong motion characteristics were investigated in terms of peak ground motion and spectral acceleration values. Directiviy effects were discussed in detail via elastic response spectra and wide band spectograms to see the high frequency energy distributions. Source parameters and slip distribution results of the earthquake which had been proposed by different researchers were summarized. Influence of the source parameters on structural response were shown by comparing elastic response spectra of Muradiye synthetic records which were performed by broadband strong motion simulations of the earthquake. It has been emphasized that characteristics of the earthquake rupture dynamics and their effects on structural design might be investigated from a multidisciplinary point of view. Seismotectonic calculations (e.g., slip pattern, rupture velocity) may be extended relating different engineering parameters (e.g., interstorey drifts, spectral accelerations) across different disciplines while using code based seismic design approaches. Current state of the art building codes still far from fully reflecting earthquake source related parameters into design rules. Some of those deficiencies and recent efforts to overcome these problems were also mentioned. Next generation ground motion prediction equations (GMPEs) may be incorporated with certain site categories for site effects. Likewise in the 2011 Van Earthquake, Reverse/Oblique earthquakes indicate that GMPEs need to be feasible to a wider range of magnitudes and distances in engineering practice. Due to the reverse faulting with large slip and dip angles, vertical displacements along with directivity and fault normal effects might significantly affect the engineering structures. Main reason of excessive damage in the town of Erciş can be attributed to these factors. Such effects should be considered in advance through the establishment of vertical design spectra and effects might be incorporated in the available GMPEs.

• 한국태양에너지학회 논문집
• /
• 제32권1호
• /
• pp.15-24
• /
• 2012

IEC 61400-1 requires design lifetime of wind turbines at least 20 years, thus wind turbine should be assured for structural safety through load assessment. DLCs have been defined with respect to the load assessment in IEC 61400-1. In addition, if the extreme design values for DLC1.3 are equal or exceed the extreme design value for DLC1.1, DLC1.1 may be omitted. To omit DLC1.1, scale factor (c) will be increased in DLC1.3. However, this particular adjustment is not specified guidelines. Thus, this study was conducted. DLC1.1 was calculated for extrapolation of 50 years-extreme events using several probability distribution functions and fitting methods. And DLC1.3 was calculated for up to seven different values of scale factor (c) with $2{\leq}c{\leq}5$ in steps of 0.5. Finally, in this study, scale factor (c) that was the value of 4.51 was determined.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.689-702
• /
• 2019

This paper deals with the verification of the functions about mining robot, which is the system for developing deep seabed resources by applying V&V(verification and validation). In order to overcome water pressure of 500 bar and to travel on soft ground, and to operate in deep sea environment with bad conditions, it is necessary to develop a robot that can satisfy various deepsea conditions. A mining robot has been developed based on simulation based design and Multidisciplinary design optimization. In order to verify the developed robot, lab test and real sea test should be performed for various marine environment conditions. There are too many requirements to consider, such as space, time, cost, personnel, and environment to do performance test. So it is costly and time consuming for developing robot. In order to solve this problems, V&V technique was applied to mining robot. The stages of mining robot design, fabrication and commission were verified.

• Advances in concrete construction
• /
• 제16권1호
• /
• pp.21-34
• /
• 2023

This work presents a complete optimal model for trapezoidal combined footings that support a concentric load and moments around of the "X" and "Y" axes in each column to obtain the minimum area and the minimum cost. The model presented in this article considers a pressure diagram that has a linear variation (real pressure) and the equations are not limited to some cases. The classic model takes into account a concentric load and the moment around of the "X" axis (transverse axis) that is applied due to each column, i.e., the resultant force is located at the geometric center of the footing on the "Y" axis (longitudinal axis), and when the concentric load and moments around of the "X" and "Y" axes act on the footing is considered the uniform pressure applied on the contact surface of the footing, and it is the maximum pressure. Four numerical problems are presented to find the optimal design of a trapezoidal combined footing under a concentric load and moments around of the "X" and "Y" axes due to the columns: Case 1 not limited in the direction of the Y axis; Case 2 limited in the direction of the Y axis in column 1; Case 3 limited in the direction of the Y axis in column 2; Case 4 limited in the direction of the Y axis in columns 1 an 2. The complete optimal design in terms of cost optimization for the trapezoidal combined footings can be used for the rectangular combined footings considering the uniform width of the footing in the transversal direction, and also for different reinforced concrete design codes, simply by modifying the resisting capacity equations for moment, for bending shear, and for the punching shear, according to each of the codes.

• 문화기술의 융합
• /
• 제6권1호
• /
• pp.501-506
• /
• 2020

본 실험 연구에서는 대표적인 네 가지 타입의 승용차 차량형태에 대한 공기역학(공력) 성능 분석, 측면 유리의 각도에 따른 공력 성능 분석, 엔진후드(엔진 덮개)의 각도차이에 따른 공력 성능 분석, 루프 라인의 각도 차이에 따른 공력 성능 분석을 통해 차량의 형태 변화에 따라 공력 성능이 어떻게 변화하는지를 종합적으로 분석해 보았다. 실험결과 비스듬히 떨어지는 후면 유리 라인은 공력 성능을 저하시켰고, 루프의 각도 차이에 따른 공력 성능 차이는 거의 나타나지 않았으며 일찍 떨어지는 후면 라인은 공력 성능에 가시적인 영향을 끼치지 않았다. 차량의 루프라인이 수평으로 늦게까지 이어지다 천천히 떨어지는 후면 유리 라인은 스타일링에 도움이 될지언정 공력 성능은 저하시켰다. 후방 디퓨저의 경우 차체의 형태에 따라 그 성능 효과가 달라지는 것으로 판단되었다.

• 척추신경추나의학회지
• /
• 제15권2호
• /
• pp.43-54
• /
• 2020

Objectives The purpose of this review was to analyze the trend of clinical research related to fibromyalgia and to suggest the direction of intervention Methods We reviewed the clinical research by searching seven Korean web databases and classified the studies by the year of publication, academic field, and study design. Results A total of 75 clinical studies were selected. Except for 2002, more than one study was annually published; however, the number was below 10. In the academic field, there were 34 in the medical field, 21 in the Korean medicine field, and 15 in the nursing science field. By study design, there were 62 observational studies, mostly case reports and case-control studies. There were 13 experimental studies, including non-random control studies and one group pre and post-test design studies. Conclusions Fibromyalgia-related clinical research requires a greater number of studies, and a study design with a high level of evidence should be conducted along with various observational and intervention studies. Additionally, multidisciplinary and integrated intervention plans and research are needed.

• 감성과학
• /
• 제8권3호
• /
• pp.213-220
• /
• 2005

본 연구의 목적은 의복 고유의 속성을 유지하면서도 각종 디지털 장치 및 기능을 의복 내에 통합시키는 스마트 의류의 모듈형 모형을 개발하는 것이다. 이를 위하여 의류와 디지털 기기를 접목할 수 있는 다학제적 기술을 개발하고, 음악 감상 기능, 생체 모니터링 및 외부환경 감지 기능 등 다양한 디지털 디바이스를 의복에 내장함으로써 엔터테인먼트 및 건강관리 기능을 중점 지원하는 총 4종의 스마트 스포츠웨어(트레킹복, 조깅복)의 디자인 프로토타입을 제시하였다.

• 한방재활의학과학회지
• /
• 제31권3호
• /
• pp.19-29
• /
• 2021

Objectives To investigate the trends in clinical study on rheumatoid arthritis in all academic fields in Korea. Methods We searched seven Korean web databases for clinical studies published from 2008 to 2021. All identified studies were reviewed and classified by the year of publication, academic field, and study design. Results A total of 347 clinical studies were selected. An average of 26.7 studies were published each year. Regarding the distribution of studies by academic fields, 309 studies were published in the medical field and 17 studies were published during the same period in Korean medicine, and 21 studies were published in other fields. The distribution of studies by study design was as follows: 8 studies, meta-analyses; 5 studies, systematic reviews; 16 studies, experimental studies; and 318 studies, observational studies. Conclusions Multidisciplinary access and management are required for the early diagnosis of rheumatoid arthritis, effective management of disease progression, and prevention of rheumatoid joint deformities. Additionally, study design with high-level of evidence on the intervention of rheumatoid arthritis are warranted.

• 디자인학연구
• /
• 제12권3호
• /
• pp.227-234
• /
• 1999

본 논문은 디자인 프로젝트 관리의 리엔지니어링으로서 프로젝트의 기획, 조직, 일정, 그리고 제어하는 통합적인 어플리케이션 소프트웨어 개발의 기초모델을 설정하고, 이를 토대로 프로젝트 관리 시스템의 연구/개발을 목표로 삼고 있다. 프로젝트의 성과, 소요기간, 소요예산, 그리고 소요자원 등을 관리하는 과정이 프로젝트 매니지먼트 기술의 근간을 이루는 것으로, 디자인 프로젝트 상의 수많은 정보를 적시에 효율적으로 처리함으로써 프로젝트를 성공으로 이끌 수 있게 된다. 한편, 디자인프로젝트의 관리를 집단의사결정에 의해 처리함으로써 신뢰도와 합리성의 제고는 물론, 이를 통한 사기앙양이 기대된다. 따라서, 여기에서 야기되는 의사집합의 곤란, 시간손실, 구성원의 갈등 등의 프로젝트 관리에서 비롯되는 부수적인 문제도 전자의 기본적인 관리요소와 함께 통합하여 디자인 프로젝트 관리 시스템(DPMS)을 연구/개발하였다. DPMS 시스템은 디자인 프로젝트의 선정과 디자인 프로젝트의 기획/실행관리/ 평가로 주요 모듈을 설정함으로써 프로젝트 매니저는 해당 프로젝트 과업(Task)과 활동(Activity)에 대한 팀의 운용을 융통성 있게 관리할 수 있게 된다. 이와 더불어 프로젝트 관리를 On-Line DBMS 시스템 환경 상에 운용되도록 하여 정보의 재생산성, 운용의 동시성, 그리고 보안성 등을 도모하였다.