• 산업기술연구
• /
• 제26권A호
• /
• pp.47-54
• /
• 2006

To improve passenger safety, seat belt systems with pre-tensioner that tightens seat belt webbing using explosive just before collision are widely used these days. Even though seatbelt must not unlatched without passengers' operation. explosive power of pre-tensioner can cause unlocking of a buckle. To prevent the unlocking, an anti-g mass that blocks displacement of the release button has been attached to the buckle. In this study, the dynamics and statics of locking mechanism associated with operation of anti-g buckle has been theoretically investigated, and important design variables that affect the operation of anti-g buckle have been identified. Through the total seat belt system's dynamic simulation using force and displacement inputs obtained from seat belt sled test, design of the proposed anti-g buckle has been validated.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.377-387
• /
• 2005

The equations of motion of two-wheeled vehicles, e.g. bicycles or motorcycles, are developed by using Lagrange's equations for quasi-coordinates. The pure rolling constraints between the ground and the two wheels are considered in the dynamical equations of the system. For each wheel, two nonholonomic and two holonomic constraints are introduced in a set of differential-algebraic equations (DAE). The constraint Jacobian matrix is obtained by collecting all the constraint equations and converting them into the velocity form. Equilibrium, an algorithm for searching for equilibrium points of two-wheeled vehicles and the associated problems are discussed. Formulae for calculating the radii of curvatures of ground-wheel contact paths and the reference point are also given.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.544-550
• /
• 2003

The contact analyses of arbitrary shaped spatial bodies are important in the study of multi-body dynamics. This paper presents a method fur calculating contact force between bodies in space. At each integration time step, the proposed method finds potential contact points on bodies and then calculates the penetration, the velocity of penetration, and the contact force. A continuous analysis method is adopted to calculate the contact force. To get contact points accurately on their outlines, a new algorithm is developed. The proposed algorithm is tested and compared the results of DADS. As applications, the contact of two steel balls, spatial pendulums, and the problem of a ball and bat are demonstrated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1730-1735
• /
• 2003

In this paper, the absolute nodal coordinate formulation was introduced to describe the large deformation problems. And also, the modal coordinates were employed to represent the small elastic deformation. A new hybrid formulation was developed to combine the modal coordinates and the absolute nodal coordinates. A spherical joint and the DOT1 constraint were developed to carry out the numerical simulation of mechanical systems with kinematic joints. A beam example was suggested to show the new formulation. The simulation results using the modal coordinates and the absolute nodal coordinates show a good agreement to the experiments.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.9-17
• /
• 1996

This paper develops a sequential updating method of the Euler parameter generalized coordinates for the machine kinematics and dynamics, The Newton's method is slightly modified so as to utilize the Jacobian matrix with respect to the virtual rotation instead of this with repect to the Euler parameters. An intermediate variable is introduced and the modified Newton's method solves for the variable first. Relational equation of the intermediate variable is then solved for the Euler parameters. The solution process is carried out efficiently by symoblic inversion of the relational equation of the intermediate variable and the iteration equation of the Euler parameter normalization constraint. The proposed method is applied to a kinematic and dynamic analysis with the Generalized Coordinate Partitioning method. Covergence analysis is performed to guarantee the local convergence of the proposed method. To demonstrate the validity and practicalism of the proposed method, kinematic analysis of a motion base system and dynamic analysis of a vehicle are carried out.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.534-539
• /
• 2000

A flexible rotating beam test bed has been developed for experimental verification of flexible rotating beam dynamics and vibration. It consists of a flexible arm, harmonic driver reducer, ac servo motor and DSP board with PC. To capture the motion induced stiffening effects of the flexible rotating beam, substructuring model has been established in multibody dynamics simulation. Substructuring model provides better results comparing with experimental data.

• 한국항공우주학회지
• /
• 제47권10호
• /
• pp.705-711
• /
• 2019

전개형 반사판 안테나의 전개거동 특성을 해석적 그리고 실험적 방법으로 분석하고자 한다. Kane 방정식을 이용하여 전개형 안테나의 다물체 운동방정식을 공식화하였다. 복합재료 반사판의 구조변형 특성을 살펴보기 위해 FSDT(First-order Shear Deformation Theory)를 이용하여 빔 모델로 유한요소 정식화 하였다. 역진자 모델을 이용하여 안테나 전개시간에 따른 스프링 상수 그리고 댐핑 계수들을 결정하였다. 다물체 동력학 해석을 통하여 설계변수에 따른 안테나 반사판의 동적구조 특성을 확인하였고, 무중력 모사 전개실험을 통하여 해석결과 검증 및 거동특성을 실험적으로 관찰하였다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.141-148
• /
• 2015

본 연구에서는 진공 차단기(Vacuum circuit breaker)의 동적 특성을 모사하기 위해 리커다인을 이용한 다물체 동역학 해석 모델이 개발 되었다. 진공 차단기는 VI(Vacuum interrupter)를 포함한 3 개의 주회로 부와, 구동 메커니즘을 포함한 기구부로 구성된다. 이 해석적 모델의 검증을 위해, 해석 결과와 실측을 통한 실험적 결과를 비교 하였다. 일반적으로, 원활한 사고 전류 차단을 위해서는 0.9~1.1m/s 의 차단속도(Opening velocity)가 필요하다. 차단 속도의 향상을 위해, 다구찌 기법을 이용하여 진공 차단기의 설계 변수 최적화를 수행하였다. 또한 향상된 차단기의 동적 특성을 검증하기 위해, 해석 결과와 개선된 샘플의 실험적 결과를 비교 분석 하였다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.789-798
• /
• 2020

This paper considers the development of the dynamic analysis model and simulation-based operation safety estimation of A-Frame to be applied to the test evaluation support vessel for real sea test. The support vessel will be manufactured by modifying the existing offshore support vessel. Also, development and installation of various sensors and supporting facilities for test evaluation are under preparation. Among these facilities, A-Frame is an equipment that transfers marine equipment from ship deck to the sea floor, and is being designed to transfer up to 50 ton class equipment. However, the A-Frame is a moving equipment using hydraulic cylinders. When the 50 ton equipment is attached and transferred to A-Frame, the buckling of cylinders may occur or A-Frame becomes inoperable due to the influence of huge inertia. For this reason, safety verification should be performed using dynamic analysis techniques that can take into account huge inertia forces in the design of A-Frame. Therefore, in this study, A-Frame and ship behavior were modeled using dynamic analysis method, and the applied loads of various equipment including hydraulic cylinder of A-Frame was measured and the operation safety review was performed.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.329-335
• /
• 2014

U 자형 전자석 하나로 부상력과 안내력을 동시에 얻는 중 저속 자기부상열차는 안내제어기 없이 곡선을 주행한다. 때문에 곡선, 특히 곡률반경이 매우 작은 곡선 주행 시에 차량이 레일과 물리적 접촉을 방지하기 위해서는 곡선형상의 결정이 세심하게 이루어져야 한다. 특히 완화곡선의 형상이 중요하다. 본 논문에서는 완화곡선 선로를 구성하는 형상 매개변수들의 차량 안내 성능에의 영향도를 분석하는데 목적이 있다. 이를 위하여 차량, 전자석, 부상제어기, 곡선가이드웨이가 통합된 3 차원 자기부상열차 다물체 동역학 모델을 개발하였고, 개발된 모델을 이용하여 곡선형상을 구성하는 매개변수 연구를 수행하였다. 연구 결과는 곡선형상의 결정이나 차량의 대차구조를 설계하는데 이용이 가능하다고 할 수 있다.