An experimental study is conducted to investigate the flow and heat transfer characteristics of a multi-tube inserted impinging jet. Four different multi-tube devices are tested for various nozzle-to-plate distance. Flow visualization by smoke-wire method and velocity measurements using a hot-wire anemometer are applied to analyze the flow characteristics of the multi-tube insert impinging jet. The local heat transfer coefficients of the multi-tube inserted impinging jet on the impingement surface are measured and the results are compared to those of the conventional jet. In multi-tube inserted system the multi-tube length plays an important role in the flow and heat transfer characteristics of the jet flow. With multi-tube insert of I3d4 and I6d4 which has relatively longer tube length than the multi-tube-exit of I3d1 and I6d1, the flow maintains its increased velocity far downstream due to interaction between adjacent flows. For the small H/D of 4, the local heat transfer coefficients of multi-tube inserted impinging jet are much higher than those of the conventional jet because the flow has higher velocity and turbulent intensity by the use of the multi-tube device. At large gap distance of H/D=12, also higher heat transfer rates are obtained by installing multi-tube insert except multi-tube insert of I3d1.
최근 무선 멀티 인터페이스를 이용한 동시 접속 기술에 관한 연구가 활발히 진행 중이다. 이와 관련된 연구로 IETF Netext WG에서 Proxy Mobile IPv6 (PMIPv6) 기반 멀티인터페이스 지원 기술에 대해서 표준 기술이 논의 중에 있으며 IETF MIF(Multiple InterFace) WG에서도 멀티인터페이스 노드 관점와 네트워크 관점에서 멀티 네트워크 인터페이스 지원 시 발생하는 문제점을 정의하고 이를 해결하기 위한 기존 기술 분석을 진행 중이다. 본 논문에서는 Proxy MIPv6 도메인에서 멀티 호밍 지원 기술을 가진 Proxy MIPv6 프로토콜을 이용한 멀티인터페이스 동시접속과 인터페이스 사이의 inter handoff 지원 기술 시 발생하는 문제점들을 정의하고 가능한 해결 시나리오에 대해서 논의한다.
실시간 홀로그래피 방송을 제작하기 위해서는 디지털 홀로그램을 고속으로 생성하는 것이 중요하다. 본 논문에서는 디지털 홀로그램 생성을 위한 Computer-Generated Holography(CGH) 식의 병렬 구조를 최적화하고, Compute Unified Device Architecture(CUDA)와 Open Multi-Processing (OpenMP) 를 이용한 Multi Graphic Processing Unit(Multi-GPU) 기반의 디지털 홀로그램의 고속 생성을 위한 최적화 기법을 제안한다. 디지털 홀로그램을 생성하는 과정은 독립적인 연산을 할 수 있는 다수의 개체로 병렬화 할 수 있는 구조이기 때문에 이에 특화된 CUDA와 OpenMP를 사용함으로써 CGH식을 고속으로 연산할 수 있다. 여기서 더 나아가 이를 최적화하기 위해서 상수화, 벡터화, 루프풀기 등의 방법을 제안한다. 본 논문에서 제안된 기법을 통해서 기존 CPU에서의 CGH 연산속도에 비해 약 9,700배 정도의 속도를 개선할 수 있었다.
Chanthirasekaran, K.;Bhagyaveni, M.A.;Parvathy, L. Rama
Journal of Electrical Engineering and Technology
/
제10권6호
/
pp.2406-2412
/
2015
Multi-user multi-input multi-output (MU-MIMO) system has attracted the 4th generation wireless network as one of core technique for performance enrichment. In this system rate control is a challenging problem and another problem is optimization. Proper scheduling can resolve these problems by deciding which set of user and at which rate the users send their data. This paper proposes a new multi-parameter based scheduling (MPS) for downlink multi-user multiple-input multiple-output (MU-MIMO) system under space-time block coding (STBC) transmissions. Goal of this MPS scheme is to offer improved link level performance in terms of a low average bit error rate (BER), high packet delivery ratio (PDR) with improved resource utilization and service fairness among the user. This scheme allows the set of users to send data based on their channel quality and their demand rates. Simulation compares the MPS performance with other scheduling scheme such as fair scheduling (FS), normalized priority scheduling (NPS) and threshold based fair scheduling (TFS). The results obtained prove that MPS has significant improvement in average BER performance with improved resource utilization and fairness as compared to the other scheduling scheme.
In recent digital broadcasting, up to 250 channels are multiplexed and transmitted. The channel transmission is made in the form of MPEG-2 Transport Stream (TS) and transmits one channel (Video, Audio). In order to check if many broadcast channels are transmitted normally, in multi-channel multi-view system, ability of real-time monitoring is required. In order to monitor efficient multi-channel, a distributed system in which functions and load are distributed should be implemented. In the past, we used an inefficient system that gave all of the functionality to a piece of hardware, which limited the channel acceptance and required a lot of resources. In this paper, we implemented a distributed multi-view system which can reduce resources and monitor them economically through efficient function and load balancing. It is able to implement efficient system by taking charge of decoding, resizing and encoding function in specific server and viewer function in separate server. Through this system, the system was stabilized, the investment cost was reduced by 19.7%, and the wall monitor area was reduced by 52.6%. Experimental results show that efficient real-time channel monitoring for multi-channel digital broadcasting is possible.
Ti-Al-Si target and Cr-Si target are sputtered alternately to develop a multi-layered nitride coating on a steel mold to improve die-casting lifetime. Prior to the multi-layer deposition, a CrN layer is developed as a buffer layer on the mold to suppress the diffusion of reactive elements and enhance the cohesive strength of the multi-layer deposition. Approximately 50 nm CrSiN and TiAlSiN layers are deposited layer by layer, and form about three ㎛-thickness of multi-layered coating. From the observation of the uncoated and coated steel molds after the acceleration experiment of liquid metal injection casting, the uncoated mold is severely eroded by the adhesion of molten metallic glass. On the other hand, the multi-layer coating on the mold prevents element diffusion from the metallic glass and mold erosion during the experiment. The multi-layer structure of the coating transforms the nano-composite structured coating during the acceleration test. Since the nano-composite structure disrupts element diffusion to molten metallic glass, despite microstructure changes, the coating is not eroded by the 1,050 ℃ molten metallic glass.
본 논문에서는 이중루프 구조를 갖는 다중모드 무선전력전송 시스템을 제안하였다. 본 논문에서 제안한 다중모드 무선전력전송 시스템은 두 개의 서로 다른 주파수 6.78 MHz 자기공진 무선전력전송 모드와 13.56 MHz NFC 모드로 동작하는 외부 루프 모듈과 두 개의 서로 다른 주파수에서 동작하는 자기유도 표준인 WPC 모드와 PMA 모드로 동작하는 외부 루프와 연결된 내부 루프 모듈로 구성된다. 실제 상용 스마트폰 배터리 커버에 장착하기 위해 페라이트 시트를 포함한 $45{\times}90{\times}0.35mm3$ 크기에 맞춰 설계 및 최적화 되었다. 제안된 다중모드 무선전력전송 시스템은 기존의 자기유도방식 표준에 해당하는 WPC와 PMA를 지원할 뿐만 아니라 6.78 MHz 및 13.56 MHz에서 20 dB 이상의 반사손실 특성을 나타내었고 6.78 MHz 자기공진 무선충전 환경에서는 공진코일 간 70% 이상의 효율 특성을 갖는다.
본 논문에서는 합성 음성파형의 일그러짐을 제어하기 위하여 V/UV/S(Voiced / Unvoiced / Silence)의 스위칭을 사용하고, 피치구간마다 멀티펄스를 보정하며, 무성자음(Unvoiced)의 근사합성에 특정주파수를 이용하는 ACFBD-MPC(Amplitude Compensation Frequency Band Division - Multi Pulse Coding)와 LMS-MPC(Least Mean Square - Multi Pulse Coding)를 통합한 8kbps ACLMS-MPC(Amplitude Compensation and Least Mean Square - Multi Pulse Coding) 부호화 방식을 제안하고자 한다. 여러 방식을 통합하는데 있어서, 음성파형의 일그러짐을 줄이면서 유성음과 무성음의 비트율을 8kbps로 조정하는 것이 중요하다. 유성음과 무성음의 비트율을 8kbps로 조정함에 있어서, 개별피치를 이용하여 대표구간의 멀티펄스를 피치구간마다 복원함으로서 음성파형을 효율적으로 합성할 수 있다. 8kbps의 부호화 조건에서 ACLMS-MPC 방식을 구현하고 SNR를 평가한 결과, ACLMS-MPC의 SNR는 남자음성에서 15.0dB, 여자음성에서 14.3dB 임을 확인할 수 있었다. 따라서 ACLMS-MPC가 기존의 MPC, ACFBD-MPC, LMS-MPC에 비하여 남자음성에서 0.3dB~1.8dB, 여자음성에서 0.3dB~1.6dB 정도 개선된 것을 알 수 있었다. 이러한 방법들은 셀룰러폰이나 인터넷폰과 같이 낮은 비트율의 음원을 사용하여 음성신호를 부호화하는 방식에 활용할 수 있을 것으로 기대된다. 향후 멀티펄스 음원의 진폭과 위치를 동시에 보정하는 6.9kbps 음성부호화 방식의 음질평가를 수행하고자 한다.
A 6 DOF Multi axis simulation table (MAST) is used to perform vibration and fatigue tests for parts or assemblies of automobiles, aircraft, or other systems. It consists of a table and 6 linear actuators. For its attitude control, we have to adjust the lengths of 6 actuators properly. The system is essentially a parallel mechanism. Three actuators are connected to the table directly and other three actuators are connected indirectly. Because of these, the MAST shows also a serial mechanism#s property: the inverse kinematics is more complicated than a pure parallel mechanism and each actuator can operate independently. The authors have performed a kinematics analysis of the 6 DOF MAST. We have presented an analytical and a numerical solution for the inverse and forward kinematics, and we have verified the solutions by a 3D CAD software.
지상파 디지털방송의 표준인 ATSC 서비스가 진화하고 있다. 한국방송협회(KBA)는 2006년 독일 FIFA 월드컵방송 기간 동안 MPEG-2 압축방식을 사용한 지상파 다채널방송인 MMS(Multi Mode Service)를 시험 방송하였다. MMS는 하나의 HD채널을 제공하면서 6MHz 대역 내에서 다양한 부가서비스를 제공한다. 비디오 압축 기술(MPEG-2)을 사용하여 HDTV, SDTV, Audio 뿐만 아니라 Data신호를 전송할 수 있다. 지난 2009년 11월, KBS는 MMS서비스보다 진화한 코리아뷰(KoreaView)를 제안하였다. 코리아뷰의 압축방식은 MPEG-2와 H.264를 혼합한 방식으로 미국의 모바일방송 표준(A/153)과 동일한 방식이다. 코리아뷰는 다채널방송서비스로 6MHz대역 내에서 HD와 3개의 SD프로그램을 제공한다. 지상파 방송의 다채널 서비스는 시청자서비스 확대에 주목할 필요가 있다. 또한 지상파 방송의 다채널 서비스는 디지털 전환을 촉진시키고 시청자들의 선택권을 확대시킨다. 디지털기술의 발전으로 유료방송 채널은 수백 개로 증가하고 있다. 그러나 지상파 방송은 디지털 전환이 추진되고 있지만 다채널 서비스를 제공하지 못하고 있다. 본 연구는 지상파 다채널 서비스인 MMS와 코리아뷰의 기술적 특징과 차이를 분석하고, 향후 서비스 도입에 따른 정책적 방향을 제시하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.