• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.49-49
• /
• 2009

Nanocomposites of gold nanoparticles and multi-walled carbon nanotubes (MWNTs) were prepared by electrostatic interaction. Gold nanopartic1es were stabilized by polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS) and poly(sodium-4-styrenesulfonate) (PSS) in aqueous medium, and MWNTs were modified by poly(diallyldimethylammonium)chloride (PDDA) in water. The as-perpared Au-MWNT nanocomposites were structurally and electrically characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), UV/Vis spectroscopy, X-ray photoelectron spectroscopy (XPS) and cyclo voltammetry (CV). UV/Vis spectra of Au-MWNT nanocomposites showed the characteristic surface plasmon bands in the range of ~515nm, depending on the stabilizers. There is only slight change on the band shape with variation of stabilizing agents for gold nanoparticles. Through FE-SEM and TEM images, the distribution of gold, nanoparticles on the sidewalls of MWNTs was deliberately investigated on Au-MWNT nanocomposites treated with different stabilizers. XPS and CV showed redistribution of electron densities and changes in the binding energy states of nanopartic1es in nanocomposite respectively.

• Composites Research
• /
• 제30권1호
• /
• pp.7-14
• /
• 2017

In this paper, the inter-lamina shear strength (ILSS) of multi-wall carbon nanotube (MWNT) reinforced carbon fiber reinforced plastics (CFRP) and thin-ply composites were verified under low earth orbit (LEO) space environment. CFRP, MWNT reinforced CFRP, thin-ply CFRP and MWNT reinforced thin-ply CFRP were tested after aging by using accelerated ground simulation equipment. The used ground simulation equipment can simulate high vacuum ($2.5{\times}10^{-6}torr$), atomic oxygen (AO, $9.15{\times}10^{14}atoms/cm^2{\cdot}s$), ultraviolet light (UV, 200 nm wave length) and thermal cycling ($-70{\sim}100^{\circ}C$) simultaneously. The duration of aging experiment was twenty hours, which is an equivalent duration to that of STS-4 space shuttle condition. After the aging experiment, ILSS were measured at room temperature ($27^{\circ}C$), high temperature ($100^{\circ}C$) and low temperature ($-100^{\circ}C$) to verify the effect of operation temperature. The MWNT and thin-ply shows good improvement of ILSS at ground condition especially with the thin-ply. And after LEO exposure large degradation of ILSS was observed at MWNT added composite due to the thermal cycle. And the degradation rate was much higher under the high temperature condition. But, at the low temperature condition, the ILSS was largely recovered due to the matrix toughening effect.

• Elastomers and Composites
• /
• 제46권3호
• /
• pp.231-236
• /
• 2011

본 연구에서는 폴리아크릴레이트/카본나노튜브 복합체를 제조하고 전극재료로서의 응용가능성을 알아보았다. 복합체의 전기전도도는 MWNT의 함량에 따라 증가하였고 시트의 두께가 두꺼워 질수록 증가하였으며 MWNT 50 wt% 함량에서 0.36 ${\Omega}$/sq의 표면저항값이 얻어졌다. 복합체의 열분해온도는 폴리아크릴레이트에 비해 MWNT의 함량에 따라 증가하였으며 50 wt%의 MWNT 복합체 함량에서 $15^{\circ}C$의 증가가 관찰되었다. 복합체의 저장탄성율의 경우도 MWNT의 함량에 따라 증가하였고 특히, 고온에서의 증가가 뚜렷하였다. 폴리아크릴레이트의 열팽창거동은 온도의 증가에 따라 $20^{\circ}C$ 부근부터 수축이 된 반면, 복합체의 경우는 수축되지 않고 약간 팽창하는 경향을 보였다. 복합체의 형태학을 관찰한 결과 폴리아크릴레이트 내에서 MWNT의 분산이 잘 이루어 진 것을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1228-1231
• /
• 2005

This paper reports about the development of scanning probe microscopy (SPM) tip with multi-walled carbon nanotube (MWNT). For making a carbon nanotube (CNT) modified tips, AC electric field which causes the dielectrophoresis was used for alignment and deposition of CNTs to the metal coated SPM tip. By dropping the MWNT solution and applying an electric field between an SPM tip and an electrode, MWNTs which were dispersed into a diluted solution were directly assembled onto the apex of the SPM tips due to the attraction by the dielectrophoretic force. In this paper, we investigate experimental conditions about the alignment of the CNT to tip axis according to the change of the angle between a tip and an electrode. Experimental results are presented, and then fabricated CNT tips are showed and measurement results for 15nm gold particles are compared with that of the conventional silicon tip.

• 한국항공우주학회지
• /
• 제33권11호
• /
• pp.24-32
• /
• 2005

본 연구의 목표는 X-band에서 하중지지가 가능한 전자파 흡수 구조(RAS)를 제작하는 것이다. 본 연구에서는 하중을 지지할 수 있도록 비강성비강도가 우수한 유리섬유/에폭시 평직 복합재료에 손실을 일으킬 수 있는 MWNT를 첨가한 재료를 제작하였으며, 미세구조의 관찰과 유전율 측정을 통해 흡수 재료로의 적합성을 확인하였다. 유전자 알고리즘과 다층형 RAS의 전자파 반사/투과 이론을 적용하여 그 복합재료로 이루어진 RAS에 대한 최적설계를 수행하였다. RAS의 제작을 통해 복합재료의 층당 두께가 층수와 MWNT의 함량에 따라 변함을 확인하였다. 이를 고려한 제작 공정을 제안하고 적용하여 설계된 RAS를 제작하였고, 그것의 반사손실의 예측치와 실험치가 잘 일치함을 확인하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.50-54
• /
• 2005

We report a simple, low cost, and reliable method for assembling a multi-walled nanotube (MWNT) to the end of a metal coated scanning probe microscopy (SPM) tip. By dropping the MWNT solution and applying an electric field between an SPM tip and an electrode, MWNTs which were dispersed into a dielectric solution were directly assembled onto the apex of the SPM tip due to the attraction by the dielectrophoretic force. The effective measurement of a MWNT -attached SPM tip was demonstrated by direct comparison with AFM images of a standard sample with a bare AFM tip.

• Composites Research
• /
• 제17권4호
• /
• pp.47-52
• /
• 2004

본 논문에서는 사출성형법과 용매를 이용한 필름 캐스팅 방법을 혼용하여 MWNT/PMMA 나노복합재료의 제작방법을 확립하였다. 본 제작법을 이용하여, PMMA 모재 내에서 MWNTs의 분산도를 향상시킬 수 있었고 또한 분산상을 유지하면서 복합재료를 제작할 수 있었다. 제작된 복합재료의 기계적 물성을 측정하였고, 주사현미경 사진을 이용하여 파단면에서의 분산도를 확인해 보았다. 아울러 계면활성제가 MWNTs의 분산도 향상 및 기계적 물성 향상에 미치는 영향을 알아보았다

• 설비공학논문집
• /
• 제19권3호
• /
• pp.275-283
• /
• 2007

An experimental study was conducted to investigate the effect of the morphology of CNT (Carbon Nanotube) on the thermal conductivity of suspensions. The effective thermal conductivities of the samples were measured using a steady-state cut bar apparatus method. Enhancements based on the thermal conductivity of the base fluid are presented as functions of both the volume fraction and the temperature. Although functionalized SWNT (Single-Walled Carbon Nanotube) produced more stable and homogeneous suspensions, the addition of small amounts of surfactant to suspensions of 'as produced' SWNT demonstrated a greater increase in effective thermal conductivity than functionalized SWNT alone. The effective thermal conductivity enhancement corresponding to 1.0% by volume approached 10%, which was observed to be lower than expected, but more than twice the values, 3.5%, obtained for similar tests conducted using aluminum oxide suspensions. However, for suspensions of MWNT (Multi-Walled Carbon Nanotube), the degree of enhancement was measured to be approximately 37%. It was postulated that the effect of clustering, resulting from the multiple heat-flow passages constituted by interconnecting neighboring CNT clusters, played an important role in significant enhancement of effective thermal conductivity.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.18-21
• /
• 2008

The study deals with the effects of parameters in the synthesis of carbon nanotubes in liquid nitrogen to find the most appropriate conditions such as electrical voltage and time that give carbon nanotubes with large volume and less proportion of impurity, which is a non-nanotubed carbon. The experiment employed the method of arc-discharge between graphite cathode and anode which are immersed in liquid nitrogen. The electrical DC current of 60A and 70A were applied with the time period ranging from 10 seconds to 25 seconds. It was found that the electrical current of 60A and 13 seconds arc-discharge time allowed the largest volume of carbon nanotubes generation. The longer time leads to more impurities around the carbon nanotubes. By the filtration of CNTs-suspended solution using 0.2 micrometers porous paper filter and the characterization using TEM, the carbon nanotubes synthesized in the study were approximately 25 layers multi-walled nanotubes with the average diameter of 18.2 nanometers.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.262-267
• /
• 2016

본 연구에서는 건식플라즈마 환원방법을 이용하여 다중벽 탄소나노튜브(MWNT) 코팅 층 위에 백금, 금, 백금/금 이종 나노입자를 쉽고 균일하게 고정화 시킬 수 있는 방법을 제시한다. 나노입자는 다중벽 탄소나노튜브 위에 안정적이고 균일하게 고정화되어 나노하이브리드 소재가 되며, 이렇게 합성된 나노하이브리드 소재는 염료감응형 태양전지의 상대전극에 적용된다. CV, EIS, Tafel 측정을 통해 준비된 상대전극의 전기화학적 특성을 분석한 결과, PtAu alloy/MWNT 상대전극이 가장 높은 전기화학적 촉매 활성과 전기 전도도를 보여준다. PtAu alloy/MWNT 상대전극을 이용한 염료감응형 태양전지는 7.9%의 에너지 변환 효율을 보임으로써 MWNT (2.6%), AuNP/MWNT (2.7%) 그리고 PtNP/MWNT (7.5%) 상대전극을 사용한 염료감응형 태양전지의 효율과 비교하였을 때, 가장 높은 효율을 보여주고 있다.