• 제목/요약/키워드: Multi-variate Linear Regression model

검색결과 10건 처리시간 0.025초

Multi-variate Fuzzy Polynomial Regression using Shape Preserving Operations

  • Hong, Dug-Hun;Do, Hae-Young
    • Journal of the Korean Data and Information Science Society
    • /
    • 제14권1호
    • /
    • pp.131-141
    • /
    • 2003
  • In this paper, we prove that multi-variate fuzzy polynomials are universal approximators for multi-variate fuzzy functions which are the extension principle of continuous real-valued function under $T_W-based$ fuzzy arithmetic operations for a distance measure that Buckley et al.(1999) used. We also consider a class of fuzzy polynomial regression model. A mixed non-linear programming approach is used to derive the satisfying solution.

  • PDF

TBM 굴진자료의 다변량 회귀분석에 의한 암반대응형 TBM의 설계모델 도출 (Rock TBM design model derived from the multi-variate regression analysis of TBM driving data)

  • 장수호;최순욱;이규필;배규진
    • 한국터널지하공간학회 논문집
    • /
    • 제13권6호
    • /
    • pp.531-555
    • /
    • 2011
  • 본 연구에서는 암반대응형 TBM의 소요 사양 산출과 커터헤드 설계를 위한 통계모델을 도출하고자 하였다. 이를 위하여 다양한 암반 조건에서 수집된 871개의 TBM 굴진자료와 51개의 암석 선형절삭시험 결과에 대해 다변량 회귀분석을 실시하여, 다양한 암석 특성과 절삭 조건을 고려한 최적 모델을 도출하였다. 회귀분석을 통해 도출된 설계모델들을 2개의 쉴드터널 현장에 적용한 결과, 커터 관입깊이, 커터 작용력 및 커터 간격과 같은 TBM 핵심 설계항목의 예측결과들이 실제 현장의 굴진결과와 잘 부합되는 것으로 나타났다.

군집화 알고리즘 및 모듈라 네트워크를 이용한 태양광 발전 시스템 모델링 (Modeling of Photovoltaic Power Systems using Clustering Algorithm and Modular Networks)

  • 이창성;지평식
    • 전기학회논문지P
    • /
    • 제65권2호
    • /
    • pp.108-113
    • /
    • 2016
  • The real-world problems usually show nonlinear and multi-variate characteristics, so it is difficult to establish concrete mathematical models for them. Thus, it is common to practice data-driven modeling techniques in these cases. Among them, most widely adopted techniques are regression model and intelligent model such as neural networks. Regression model has drawback showing lower performance when much non-linearity exists between input and output data. Intelligent model has been shown its superiority to the linear model due to ability capable of effectively estimate desired output in cases of both linear and nonlinear problem. This paper proposes modeling method of daily photovoltaic power systems using ELM(Extreme Learning Machine) based modular networks. The proposed method uses sub-model by fuzzy clustering rather than using a single model. Each sub-model is implemented by ELM. To show the effectiveness of the proposed method, we performed various experiments by dataset acquired during 2014 in real-plant.

지질 주제도 작성을 위한 지표 조사 자료와 부가 자료의 지구통계학적 통합 (Geostatistical Integration of Ground Survey Data and Secondary Data for Geological Thematic Mapping)

  • 박노욱;장동호;지광훈
    • 대한원격탐사학회지
    • /
    • 제22권6호
    • /
    • pp.581-593
    • /
    • 2006
  • 다양한 지질 주제도는 현지 조사에 의해 부분적으로 샘플링된 공간 자료의 내삽을 통해 작성되어 왔으며, 공간적 예측을 위해 공간적 상관성을 고려하는 지구통계학적 크리깅이 많이 적용되어 왔다. 이 논문에서는 지질 주제도 작성을 목적으로 부분적인 샘플링 자료와 이와 상관된 부가자료를 통합하기 위해 다변량 지구통계 기법을 적용하였다. 다변량 지구통계 기법으로 simple kriging with local means와 kriging with an external drift를 적용하였다. 지하수위 분포도 작성과 퇴적물 입도 분포도 작성의 2가지 사례연구를 수행하였는데, 지하수위 분포도 작성에는 지하수위 분포 샘플링 자료와 수치고도모델을, 퇴적물 입도분포도 작성에는 입도 샘플링 자료와 IKONOS 원격탐사 자료를 이용하였다. 사례연구 수행결과, 다변량 지구통계 기법이 그동안 많이 이용되어온 단변량 지구통계 기법 친 정규 크리깅에 비해 작은 추정 오차를 나타내면서 국소적인 특성을 반영할 수 있었다. 그러나 추정 오차의 정도는 샘플링 밀도, 부가자료와의 상관성과 공간자료 자체의 상관성 정도에 영향을 받는 것으로 나타났는데, 특히 퇴적물 입도 분포도 작성 사례연구에서 이러한 요소들이 상호 영향을 미쳐 부가자료의 이용 효과가 상대적으로 적게 나타났다.

유역특성인자를 이용한 설계홍수량 추정에 관한 연구 (Study of Design Flood Estimation by Watershed Characteristics)

  • 박기범
    • 한국환경과학회지
    • /
    • 제15권9호
    • /
    • pp.887-895
    • /
    • 2006
  • Through this research of the analysis on the frequency flood discharges regarding basin property factors, a linear regression system was introduced, and as a result, the item with the highest correlation with the frequency flood discharges from Nakdong river basin is the basin area, and the second highest is the average width of basin and the river length. The following results were obtained after looking at the multi correlation between the flood discharge and the collected basin property factors using the data from the established river maintenance master plan of the one hundred twenty-five rivers in the Nakdong river basin. The result of analysis on multivariate correlation between the flood discharges and the most basic data in determining the flood discharges as basin area, river length, basin slope, river slope, average width of basin, shape factor and probability precipitation showed more than 0.9 of correlation in terms of the multi correlation coefficient and more than 0.85 for the determination coefficient. The model which induced a regression system through multi correlation analysis using basin property factors is concluded to be a good reference in estimating the design flood discharge of unmeasured basin.

열간압연공정 에너지 사용 모델 기술개발 (Construction of Energy Model on Hot Rolling Process)

  • 홍종희;이진희;신기훈;김성주
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2020년도 제61차 동계학술대회논문집 28권1호
    • /
    • pp.265-267
    • /
    • 2020
  • 본 논문에서는 열간압연 공정에 있어 효율적인 제품 생산 스케줄링에 필수적인 제품단위 에너지 사용 모델링 기법을 제안한다. 제안된 모델은 시스템 자원을 효율적 혹은 최소화하여 사용하여 실시간 처리량을 최대화함으로써 생산 예정 리스트로부터의 예측 작업 수행시간을 최소화할 수 있도록 한다. 제안된 기법은 다변량 선형 모델 방식으로 구성됨으로써 인공 지능 혹은 신경망 학습 방식에 비교하여 그 처리 속도가 빠르다는 장점을 가지고 있다. 본 논문에서는 서두에서 대상 응용처인 철강 산업과 열간 압연 공정 및 에너지 스케줄링에 대하여 간략히 언급한 후 본문에서 모델링을 위한 사전 데이터 수집, 모델링 기법을 자세히 설명하고 결론에서 모델의 정확도 성능을 최신 신경망 기법과 비교하여 검증하였다.

  • PDF

차우검정을 활용한 선형회귀모형간 유사성 검증 (A Stability Test of the Regression Coefficients for the Linear Models using Chow Test)

  • 이기영;이성관;정소영;허태영
    • 한국ITS학회 논문지
    • /
    • 제16권2호
    • /
    • pp.73-82
    • /
    • 2017
  • 회귀모형은 현실세계 모사를 위해 우리가 흔히 활용하고 있는 통계적 방법이다. 교통분야에서도 계획이나 공학부문에 활발하게 활용되고 있지만 여러 개의 모형이 구축될 경우 개별모형의 유의성 검증에 치중하여, 모형 간의 유사성을 검증하는 단계가 부재했다. 따라서 본 연구에서는 두 선형회귀모형 간의 유사성 확인을 위해 "차우(Chow) 검정"이라는 통계적 검정 방법을 적용하였다. 차우검정은 서로 다른 두 회귀모형에서 산출된 모수의 추정값을 근거로 하여, 두 모형 사이에 어떤 유사성이 존재하는지를 통계적으로 검증하는 기법으로 오래전부터 활용되고 있는 기법이다. 차우검정의 적용성을 확인하기 위해 우선, 우천시 주야간 고속도로 교통데이터를 수집하여 각각의 속도-밀도 회귀모형을 개발하였으며 차우검정을 통해 우천시 주야간 두 모형간의 유사성을 검증함으로써 이러한 통계적 절차가 객관적인 자료분석 과정에서 중요한 역할을 수행할 수 있음을 입증하였다. 본 연구에서는 선형회귀모형들에 대한 차우검정의 적용성을 확인해 보았으며, 향후 비선형 모형간의 유사성 검증 작업이 이어질 수 있을 것으로 기대한다.

Calibration Update for the Measuring Total Nitrogen Content in Rice Plant Tissue Using the Near Infrared Spectroscopy

  • Kwon, Young-Rip;Song, Young-Eun;Choi, Dong-Chil;Ryu, Jeong
    • 한국작물학회지
    • /
    • 제54권1호
    • /
    • pp.29-35
    • /
    • 2009
  • The aim of the present study was to update the calibration that is used for the measurement of the total nitrogen content in the rice plant samples by using the visible and near infrared spectrum. Before the equation merge, correlation coefficient of calibration equation for nitrogen content on each rice parts was 0.945 (Leaf), 0.928 (Stem), and 0.864 (Whole plant), respectively. In the calibration models created by each part in the rice plant under the various regression method, the calibration model for the leaf was recorded with relatively high accuracy. Among of those, the calibration equation developed by Partial least squares (PLS) method was more accurate than the Multiple linear regression (MLR) method. The calibration equation was sensitive based on variety and location variations. However, we have merged and enlarged various of the samples that made not only to measure the nitrogen content more accurately, but also later sampling populations became more diversified. After merging, $R^2$ value becomes more accurate and significantly to 0.950 (L.), 0.974 (S.), 0.940 (W.). Also, after removal of outlier, R2 values increased into 0.998, 0.995, and 0.997. In view of the results so far achieved, Standard error of prediction (SEP) and SEP (C) were reduced in the stem and whole plant. Biases were reduced in the leaf, stem as well as whole plant. Slopes were high in the stem. Standard deviation reduced in the stem but $R^2$ was high in the stem and whole plant. Result was indicated that calibration equation make update, and updating robust calibration equation from merge function and multi-variate calibration.

지방의료원의 재무성과 영향요인 (Some Factors Affecting Profitability of Local Public Hospitals)

  • 박종영
    • 한국병원경영학회지
    • /
    • 제12권3호
    • /
    • pp.47-67
    • /
    • 2007
  • This paper aims at suggesting several ways lo change financial vulnerability and to improve managerial capability of local public hospitals (LPHs) in Korea through the identification of factors affecting profitability. Several findings of the research are as follows: To begin with, LPHs exhibited a statistically significant difference in their profitability from one another, according to tile analyses of their profitable margins from tile general characteristics. It depends on the number of hospitals in the area, the population of the hospital-built area, the number of competing hospitals, the number of staff per 100 beds, the opening of special clinic, the educational function, and the capacity of rooms. However, there was no variable in the managerial characteristics, presenting a significant difference, in contrast with hospitals which have been managed by private companies and made a great amount of profits. Second, according to the analyses of profit differences in behavioral effort-characteristics, a statistically significant difference was revealed upon the basis of the efforts to improve the clinic service, invite special patients, and shorten the period of being hospitalized. Third, the result of analyses about the difference of profitability from medical care and finance is statistically significant in the rate of labor cost, the rate of management cost, bed-occupancy rate, and the period of being hospitalized. Fourth, according to the analyses of the factors influencing the net profit ratio of the entire capital, Adjusted explanatory power(Adjusted $R^2$) was shown up to 65.2%, which is high. To compare the adjusted explanatory power stage by stage, the first stage model applying only two variables such as structural and strategic characteristics exhibited 23.8%, and the second stage model adding financial characteristics showed 51.5%. The explanatory power was much improved up to 65.2% when the third stage model incorporated the outcome of medical care performance. When the return on investment(ROI) was examined by using the multi-variate linear regression analysis at the final model of third stage, it was found that ROI had a positive relationship with the increase rate of patients, labor costs per doctor, and medical care rate of socially protected inpatients. However, it revealed that ROI had a negative relationship with the ratio of labor costs, the number of patients per managerial staff, and occupancy rate of rooms, respectively. The research suggests that in order for LPHs to increase profitability, LPH, should make efforts not only to attract patients to the hospitals without any discrimination of the patients depending on their financial status, but also to develop efficient management methods to reduce labor costs.

  • PDF

Sentinel-2 위성영상과 강우 및 토양자료를 활용한 벼 수량 추정 (Rice Yield Estimation Using Sentinel-2 Satellite Imagery, Rainfall and Soil Data)

  • 김경섭;정윤재;전병운
    • 한국지리정보학회지
    • /
    • 제25권1호
    • /
    • pp.133-149
    • /
    • 2022
  • 벼 수량 추정에 대한 기존의 국내 연구는 주로 저해상도인 MODIS 위성영상을 사용하여 우리나라 전역을 대상으로 시군 단위에서 수행되었다. 기존 연구와 달리, 본 연구는 전북 김제시를 사례로 중해상도인 Sentinel-2 위성영상과 강우 및 토양자료를 활용하여 읍면동 단위에서 벼 수량을 추정하고 그 정확성을 평가하였다. 전북 김제시를 대상으로 2018년 8월 1일에 촬영된 Sentinel-2 영상으로부터 산출된 NDVI, LAI, EVI2, MCARI1, MCARI2의 다섯 가지 식생지수와 강우량 및 논 토양 유형 자료를 읍면동별로 집계하고 종속변수의 비정규성 문제를 해결하기 위해 다중회귀분석을 확장한 감마 일반화 선형모형으로 벼 수량을 추정하였다. 벼 수량 추정 모형에서 EVI2, 9월 강우일수, 염해답 비율이 유의한 독립변수로 선정되었다. 모형의 적합도를 나타내는 결정계수는 0.68이었고, 모형의 정확성을 나타내는 RMSE는 62.29kg/10a였다. 이 모형으로 2018년 김제시 전역의 쌀 생산량을 추정한 결과는 96,914.6M/T으로 통계연보의 94,470.3M/T과 비교해 0.46%의 오차를 보여 매우 근접한 결과가 도출되었다. 또한, 김제시의 단위면적당 쌀 생산량은 552kg/10a로 도출되어 통계자료의 550kg/10a와 거의 일치하였다. 이러한 결과는 기존 연구들과 유사한 결과로 국내에서 시군 이하 단위에서 Sentinel-2 위성영상을 활용하여 벼 수량을 추정하는 것이 가능하다는 것을 입증하였다.